Equipment For Sale

RITTER R-1207P2 Door and Panel ClampSpecifications: -- Table working area: 146"; x 61"; approx. -- Steep pegboard style table. -- Motorized travers top beam of pneumatic down-acting clamps. -- (24) Pneumatic down-acting clamp cylinders. -- 6"; x 6"; clamps pads. -- (2) Position adjustable side pressure clamps. -- 5"; diameter nylon pads. -- 6"; x 6"; nylon pads. -- Clamp is setup in two equal zones. -- Pedestal mounted controls (One left and one for the right zone). -- Side pressure cylinders have approx. 5"; of stroke. -- Top down pressure cylinders have approx.. 4"; of stroke

RITTER R-200 E/A Face Frame Assembly Easel Dimensions 5' x 12' with 45° Bed angle;Specifications: -- Hold-down beam with (5) adjustable hold down cylinders. -- Squaring bars on left, right and bottom sides. -- 1" Thick laminated surfaced table. -- Heavy duty steel frame. -- (1) Coil-hose for pneumatic screw gun (screw gun not included). -- Air pressure required 100 PSI. -- Footprint: 165"l x 48" D.Shipping dimensions: 68" x 169" x 30" H. Shipping weight 1,250 Lbs.NOT IN STOCK - CALL OR EMAIL FOR CURRENT LEAD TIME TO SHIP. PRICING SUBJECT TO CONFIRMATION.

RITTER - Face Frame Assembly EaselDimensions 5' x 8' -- Bed angle 45° --Hold-down beam with: (3) Adjustable hold-down cylinders. -- Squaring bars on left, right, and bottom sides. -- 1" Thick laminated surfaced table. -- Heavy Duty steel frame. -- (1) Coil hose for pneumatic screw gun (screw gun not included); 100 PSI air pressure required. Shipping dimension: 68" x 120" x 30" HShipping weight: 1,716 LbsNOT IN STOCK - CALL OR EMAIL FOR CURRENT LEAD TIME TO SHIP. - PRICING SUBJECT TO CONFIRMATION.

RITTER R-300 V Door and Panel Clamp6' x 12' Assembly Easel - VerticalStandard Features: -- (10) Universal Clamping Cylinders and Cylinder Manifold. -- Foot Treadle operated. -- (4) Material Hold-Down Dogs. -- (3) Adjustable Material Positioning Stops. -- (2) Squaring Bars on Left and Right Sides. -- 2" Cylinder Position Grid Pattern. -- 3" Bore Clamp Cylinder Housing. -- Perforated Steel Table. -- (12) Port Manifold with 1/4" NPT Regulator/Gage. -- Adjustable pressure from 20 to 130 PSIShipping Dimensions: 151" L x 77" W x 30" HShipping Weight: 1,643 LBSNOT IN STOCK - CALL OR EMAIL FOR CURRENT LEAD TIME TO SHIP. PRICING SUBJECT TO CONFIRMATION.

RITTER R-250 E/A Face Frame & Cabinet Door Clamp6' x 12' Framemaster Face Frame Frame and Door Assembly EaselIncludes: -- 6’x12′ Face Frame and Door Assembly Table. -- (5) Cylinder Clamp Arm. -- (10) Universal Clamp Cylinders & Manifold. -- Foot Treadle. -- (4) Material Hold-down Dog. -- (3) Adjustable Material Positioning StopsNOT IN STOCK - CALL OR EMAIL FOR CURRENT LEAD TIME TO SHIP. PRICING SUBJECT TO CONFIRMATION.

2019 ROADTEC RX600E-3 COLD PLANNER/MILL 816 ORIGINAL HOURS 675 HP QSX CUMMINS RECENT TRACK PADS MACHINE IS IN EXCELLENT CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN NO PAYMENTS FOR 3 MONTHS WITH GOOD CREDIT GRANITEHE.COM

Robbins Hurricane Chop Saw 20" blade Live infeed Outfeed with kicker

ROBINSON - EF/T, ...36" Band Resaw Solid Heavy-Duty Vertical Resaw. Equipped with: -- 3-Phase Electric Motor. -- 36" Dia. balanced steel wheels. -- 4" Max. band width capability provides feed speeds up to 100 FPM. Complete with: -- Large work surface for the most demanding jobs

Robinson Hurricane Chop Saw 18" 5 HP 3 phase 208-230/460 volt Right to left hand Pneumatic pedal control

ROBUST SD 70 Low Noise Vertical Wood Waste GrinderBasic machine features: -- BOVER_BASIC intelligent control system -- Power set (electric motor, reduction gear, and belt transmission) -- Vertical hopper -- Hydraulic pressure unit -- Robust and adjustable -- Hardened knives with four cutting edges with an extended service life -- Hardened cleaning knives -- Hardened cutting racks -- HARDOX sieve -- The motor start-up is controlled by the star/triangle systemTechnical Specifications: -- Main motor 30 kW (40 HP) -- Top Opening: 1445 mm × 1345mm ( 56.8" X 53") -- Rotor working length: 650 mm -- Rotor diameter: 270 mm -- Number of knives: 28 -- Screen hole diameter 10 - 50 mm -- Production capacity: 3 - 5 Cubic meter -- Weight : 1,750 Kg (3,850 Lbs) -- OAL 1973 mm X 1548 mm (77.6" X 61")

ROBUST SD 60E Low Noise Vertical GrinderFeatures: -- One-piece machined cutterhead without welding for increased accuracy in knife fastening. -- The inserts can be used on their four (4) sides, which reduces operating and tooling costs. -- Overload protection. -- Several dimensions of HARDOX Screen available according to your requisitions.Technical Specifications: -- Motor (18.5KW) - 25CV/600V/60C/3Ph -- Top opening 946 mm x 567 mm (37" X 22.3") -- Cutterhead diameter 222 mm -- Cutterhead speed 80 à 120 RPM -- Quantity of TCT tips 14 ( + 2 latéral) -- Productiion capacity 3 à 4 m3/hour The capacity varies according to the dimensions of the grill, the type of wood and its humidity rate . -- Rear screen dimensions of holes 10 à 30 mm -- Dust hood 160 mm -- Machine dimensions 1881(L) x 1115(W) x 1670(H) (70" X 44" X 65.7")

ROBUST SD 45 Vertical Low Noise Grinder; The model SD 45 is characterized by low power consumption, high productivity, and ease to use.Features: -- Universal use (diverse wood, particle boards, veneer, MDF plates, cardboard boxes, plastics, etc.); -- Completely automatic operation -- The engine start-up is controlled by the star/triangle system -- Hardened knives with four cutting edges with an extended service life -- The crushing unit without any mechanical obstacles that could cause stopping -- The HARDOX sieve -- Simple installation, plug-in and start-up -- Economic use of energy -- Extremely quiet operation -- Simple and minimum maintenanceTechnical Specifications: -- Motor: 20 HP (15 kW) -- Rotor diameter: 150 mm -- Rotor speed 140 RPM 140 -- Number of knives: ) 17 (15 + 2) -- Top opening 640 mm x 430 mm ( 25.2" X 17") -- Dust extraction size 152 mm diameter -- Weight 950 Kg (2090 Lbs) -- Screen with holes available from 10 to 50 mm (comes standard with 12 mm screen) -- Production capacity: Approx. 0,5 - 1,5 Cubic meters per minute

ROCKWELL - 43-340: ShaperHeavy-Duty Shaper;; series 43-340. -- 1 HP. -- Table Size: 27" x 36".

ROCKWELL/DELTA 16-RAS, 16" Radial Arm SawSpecifications: -- Blade dia. 16";; base size 37" x 37 x 31"; H; approx. 18" crosscut cap.; approx. 42"; out & 26"; rip cap.Equipped with: -- 5 HP - 3,450 RPM Motor; 34-1/2" table height sitting on mobile base; 32-1/2" without. Includes: -- (5) Sharpened blades.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i5w 2 HP Motor, belt driven to saw arbor, 10" blade cap., 5/8" dia. tilting arbor, tilts 0° - 45°; 36" x 27" table. 18" left of the blade. Complete with: 2-3/4" x 33" Rip Fence with approx. 25" travel. NOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

Rebuilt Rolly II Heads available

NEW Rolly Rollers, In-Stock, $5500/set

Ripsaw Feeder with 32" wide feed rolls on 18" thru 28" roll centers; will feed 3' thru 16' lumber. With 24" of in-out fence travel; feed speeds from 50 to 150 FPM; 3/4 HP feed roll drive and 3/4 HP fence drive via gear motor with brake. -- Fabricated frame of structural steel with boots that allow +/- 1" elevation adjustment. 3-1/2" dia. steel feed rolls driven by a variable frequency drive for speed adjustment; rolls are canted to aid in holding stock against the fence. -- Powered fence with 24" fence travel is easily shifted via joystick control for stock alignment with the sawblades. -- With pneumatic powered gate to keep material from feeding until the operator initiates the feed sequence. -- Urethane covered idler pinch roll is attached to the fence and is powered down at the start of the feed sequence. When a photocell detects the board is clear of the gate, the pinch roll and gate will return to their normal position. Electrical control panel ready for connection to the power supply.

ROSE MACHINERY HBR Horizontal Band RE-RIP SawThe Horizontal Band Re-Rip Saw is an effective and efficient means of ripping short blocks into as many as six (6) set rip widths. Rip widths are easily adjustable, as well as the setting for stock thickness.Advantages of the system: -- Compact, efficient use of floor space. -- Accurate cutting of rips with minimum tear-out. -- Short blocks, 4" minimum length, without taper problems. -- Straight through feed design, good for sorting. -- Minimum dust collection required. -- Single point scrap collection. -- One saw drive motor, requires less power. -- Safety, no kickback problems.Specifications: -- Five (5) rip widths - (6) optional -- 20 HP bandsaw drive -- 30" diameter band wheels, 2" wide face -- (2) 3/4 HP feed works drives -- 1-1/2 HP feed belt drive -- 1" to 6" rip width (independently adjustable in each lane) -- 10" maximum board width at maximum rip -- 4" maximum waste piece width -- 3/4" to 2" stock thickness (all lanes adjust together) -- 4" minimum stock length -- 36" maximum stock length -- 80 FPM feed speed -- 52" to 58" pass line height -- Motor starters and push buttons included, wired for 440 volt, 3 phase, 60 Hz (uses standard mag starters) -- An automatic band lubrication system is includedOptional Equipment: -- For SIX (6) LANES, add ...$5,600 (SORTER increases $3,700) -- Automatic machine grease lubrication system, add ...$ 9,200 -- Ergonomic overhead stock slide, add ...$ 5,600 -- Output conveyor and sorter for 5-LANEsingle side discharge, add ...$47,300 -- Output conveyor and sorter for 6-LANE single side discharge, add ...$51,100 -- Operator's platform, add ...$ 7,900 -- Optional voltage configuration: 220/380/440V, 50HZ, add ...$2,900 -- Start-up and training, add $1,000 per day plus expenses at costHorsepower Requirements: -- (1) @ 20 HP -- (1) @ 1-1/2 HP -- (2) @ 3/4 HPDust Collection: -- (2) outlets, 6" diameter, 5,200 FPM velocity @ 2,300 CFMCompressed Air Required: -- 90 PSI @ 1.4 CFM

ROSE MACHINERY TRANSFER SYSTEM: PANEL RIPPER TO MOULDER INFEED OUTFEED TRANSFERA Rollcase will carry stock away from a LHI 72" Panel Ripper. When the stock reaches the far end-stop, a 6-Strand Transfer Belt will pop up and take the stock to a Lateral Chain Feeder (supplied by others). The lifting mechanism is triggered by photocells and powered by an air bag using plant air. When the stock clears the Rollcase, the transfer will return to the down position to receive the next batch of strips. Rollcase Specs:17' 0" long; 76" between frame; 1.9" dia. X 12 gauge rollers. Galvanized rollers are set high on 3" centers. 5-1/2" x 1-1/2" x 12 gauge formed steel channel frames; welded construction. 120 FPM maximum. Dual shaft w/jump chain; underhung drive; timing belt driven; 1 HP, 575 volt/3ph/60hz motor; less controls. With (3) H-style leg supports; 34" top of roller; adjustable 32" to 38", with knee braces. Fixed angle end-stop. Frame is powder coated blue; guards powder coated yellow. Transfer Specs:B/17 purple power twist belt; 36" strand centers; 10'-0" long. UHMW chain track; airbag lifting style; thru frame; 36" top of chain. With 1/2 HP Boston 575 volt/3ph/60hz motor with Boston reducer for 120 FPM; less controller; proximity switches to detect carriage position are mounted only; solenoid valve, mounted and plumbed; filter/regulator - mounted and plumbed. With central bearing lube. Frame is powder coated blue; guards powder coated yellow Electrical Controls:ROSE provides an Electrical Control & Cabinet that will control the above Outfeed Transfer System. Electrical Control will incorporate a fused disconnect for incoming power, transformer and power supply for control voltage, (4) variable frequency drives for the motors, a PLC to read input devices and control output devices, and pushbuttons/switches for operator control. The panel will be mounted and wired to the enclosed devices. Incoming power and other field wiring is by others. Two days startup assistance is included. Travel expenses will be billed at cost separately.Conditions:All gear-motors, mechanical equipment, limit switches, sensors or photoelectric devices as required for each item of this quotation, will be supplied and mounted. All pneumatic cylinders or other pneumatic power devices and their valves will be supplied and mounted. They will have connecting hoses and fittings installed. Filter/Regulator units will be supplied, mounted and connected by hose to the valves. Compressed air service to equipment is by others.Exclusions:This proposal describes the machinery to be provided by Rose Machinery Inc.. The equipment supplied by Rose Machinery Inc. is specifically limited to the items actually described in the itemized details of this quotation. Unless specifically mentioned herein, all other items and services are the responsibility of the Buyer. State or local sales taxes, or any permit or other fees that may be required are not included. All field wiring, plumbing, and installat