Mobile Wood Chippers For Sale

2006 Morbark Hurricane 18 with 4,942 hours. 18" chipping capacity, Caterpillar 213 pre emission diesel, 1,593 hours on newer motor. Machine has full hydraulics- 360' rotation chute, (3) jacks and 5000 LB winch. New: blades , blade bolts , blade pockets, cutter bar, drum bearings, blade belts , feeder wheel chain, 150' winch line with dog bone, batteries, leaf springs, fluids, filters, paint, waiting on sticker kit from Morbark. Ready for work. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Morbark Hurricane 18 with loader, Cat CA3116B 250hp T2 Diesel Engine with 1000 hours, Tandem Axle, Hydraulic Front Stabilizer, Large capacity 150 Loader, Dual Rear Stabilizers, Hydraulic swivel Discharge, Flow Control, Tail light guards. Weight: 16,530 lbs Length: 20’ 2” Width: 7’ 4” Height: 8’ 8” 2 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2011 Morbark M20R Track Chipper, Cat 415HP with 5090 hours, Radio Remote, Infeed conveyor, Woods ready. H 11’5” W 8’6” L 22’9” 26,540 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2009 Morbark 30/36 Tree Chipper -1045 Original hours -C13 440 HP -A/C blows cold -Clean tight chipper

Microchipper, recently installed all new pocket liners and hardware. Fully functional, with remote. Ready to go. CAT C15 540HP Advantage 3 Drum- 12 knife Twin Disc Clutch Air Compressor Light Package

1994 Morbark 23WCL 23" disk chipper With loader Good condition Includes: extra (new and used) knives, counter knives, & top plate

Good running machine Disc hardware recently installed Remote

1998 Morbark 22RXL Disc Chipper -Unkown hours -Cummins Recon engine(600hp) -Needs new inside hood but has replacement for it -Tires are good -No lights On Job Chipping now videos upon request!!!!!! Available as a package with two chip trailers 42x96 rear load CALL FOR PRICE!!!!!!

2012 Morbark M18RX 18" Drum Chipper, John Deere 4 cylinder, 4,248 hours, Good condition, Winch, knives. Height:9'4" Width:7'8" Length18'3" Gross weight (approximate):9,550 - 11,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1997 Morbark Model 16 Whole Tree Chipper, Enclosed Cab with Heat, No AC, Single Axle with (4) Tires, New Tires and Brakes, Cummins 250 HP Diesel Engine with 2200 Hours, Nice Running Machine Perfect for Clearing Lots Weight 8,500 lb Height 8.8 Width 7.1 Length 17.11 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1997 Morbark Model 20 Whole Tree Chipper, 250 HP Diesel Engine, Injection Pump installed over 300 HP , 3900 Hours are Showing, Heat in the enclosed cab, New Starter, New Tires and Brakes, 10 sets of extra knives, Ready for the Woods. H 11’5” W 8’6” L 22’9” 26,540 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Morbark Model 23 WCL Whole Tree Chipper, Caterpillar 3412 1000 HP Twin Turbo Engine. Has 9,000 Original Hours, Heat and Ac, AC needs a Charge, New Computer, New Injectors, All Cylinders recently Repacked, All New Hoses, Ready for the Woods Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 MORBARK 23WCL WHOLE TREE CHIPPER 6 CYL CAT MORLIFT 500 BOOM CAB WITH AIR AND HEAT

Morbark 40/36 Drum Chipper, Tandem Axle, 800 HP CAT Engine, Good Condition AVAILABLE FOR RENT!!!!

2009 Peterson 4300 Whole Tree Chipper, Micro Chipper. 12 Knives on Chipper, Caterpillar C-18 765 HP, Engine Rebuilt with ONLY 1,000.00 Hours, 7,800 Frame Hours, (7) Sets of Extra Knives, Radio Remote Control with Extra Remote, New Tires, Brakes and Drum, PT Tech with ONLY Around 1,000 Hours Ago, New Starter, READY FOR WORK Weight 52,000 lbs Width 8’ 5” Length 35' 9" Height 12' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1999 Peterson Pacific 5000G Chipper -1000 h.p. 3412e engine -8000 hrs since major overhaul -3 flail -Spare flail pump -Load adapters replaced within last 1000 hours -Fan pump replaced 1500 hrs ago,Also has had swing and boom pump replaced -New Ecm has less than 750 hrs -New muffler -New feed roll teeth -New heater and a/c -Spare clutch, Spare belts, Spare pins and Seal kits -Babbit or key knife system -Fleet maintained

2024 Peterson 6310 Chipper -227 hours -Platinum warranty -16 pocket drum -Micro chips 1/2 inch or smaller -New machine goes for over 1.5 million -Going different route PRICE REDUCED!!!!!!

This machine is 100% redone. Completly rebuilt motor, new pumps, hoses, wiring harness. New knives and infeed chain

Precision Husky 23 Chipper Needs engine Has Cummins KT19 650HP

1996 Precision Whole Tree Chipper 21" Capacity 700 HP Cummins KTA Twin Turbo Needs Clutch AC Heat Good Feed Rollers Disc Wheel Completely Rebuilt New Anvil New Wire Plate Husky 235 Loader 52" Rotobec Grapple PRICE REDUCED