Mobile Wood Chippers For Sale
Category
Wood Chippers - Mobile
110 Results Found
2019 Bandit Intimidator 15XPC Brush Chipper, Gasoline Engine, Trailer Mounted, Hour Meter Reads: 512
Call for Price
2006 Bandit 2680 “The Beast” recycler 42 x 63 cutting head mill 24 x 60 mill opening 13’6” infeed conveyor 18’ discharge conveyor 300-500 yard per hour
$ 35,000
BANDIT BRUSH BANDIT MODEL 95 CHIPPER Hydraulic Dump Bed Rebuilt Deutz 300 Hours Low Use Machine
Call for Price
2007 Bandit 1700 chipper, Cummins engine, recent motor rebuild, replaced bearings and many parts on the chipper disk, towable unit ready to run. $32,000
$ 165,000
In stock 2022 Bandit 21XP Chipper, Hydraulic Winch, Hydraulic Chute, Hydraulic Jack, 275HP Cat.
Call for Price
2005 Bandit 2400T Whole Tree Track Chipper , Only 3,021 Original Hours, Undercarriage is 95% Enclosed Operators Cab with Heat and Cold Air, Caterpillar 765 HP Turbo Diesel Engine, Cat Infeed Chain with 4 Roller Feed System., Autofeed , Hydraulic Swivel Discharge, Hydraulic Flapper Engine Pre Cleaners Hydraulic Oil Coolers Rotobec 360 Degree Grapple... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
1994 Brush Bandit Model 250 Brush Chipper, Equipped with a Cummins 4BTA3.9 Turbo Diesel Engine, Engine reading 2,000 Hours, Rockford Clutch, Machine recently serviced and has a new turbo. Ready for work. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
Call for Price
1994 Bandit 1400 Whole Tree Chipper with 5,800 hours. Diesel Engine with 250 HP. Lots of new parts including a hydraulic overhaul and wiring overhaul. Runs and operates smoothly. Est. GVWR 18,000 lbs. Comes with extra msc. wear items. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
Call for Price
2013 Bandit 3090 4,600 hours on the Cat C18 765 HP Engine, Tires are 11R x22.5 length of unit 39'7" width 9'9" Height 12'4" weight 54000 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
Call for Price
2013 Bandit 2290 20” Drum Whole Tree Chipper, 440 Cat Diesel with 3,045 Hours, Tether Remote and New Radio Remote, 5 1/2’ Infeed Conveyor, Babbited Knives, Light Package, Dual Stabilizer... Popular for its great combination of size, production, performance and price, the 20-inch capacity Model 2290 whole tree chipper is a favorite for chipping tops and brushy material, either in traditional logging operations or land clearing projects. Its 24.5-inch by 26.25-inch throat opening easily accepts large diameter, brushy material. Dual feed wheels in Bandit’s unique Slide Box Feed System provide the industry’s best pulling and crushing power, while aggressive chip throwing power fully loads trailers in approximately 35-40 minutes. Length: 21’ 640.08 cm Width: 10’ 2” 309.9 cm Height: 11’ 6” 350.5 cm Weight: 40,000 - 46,000 lbs (18,143.7 - 20,865 kg) Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
Call for Price
2006 Bandit 200XP 12 inch disc chipper with 86 hp Cat engine, winch, auto feed, hand crank swivel discharge chute, heavy duty aluminum fenders tool and battery boxes. New knives and anvil excellent condition Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 30,000
BANDIT 1850XP CHIPPER Cab No Loader Hours Unknown 3K On 6 Cylinder JD 3 Sets Of Knives PRICE REDUCED
Call for Price
FARMI CH 100 F is designed as a robust and inexpensive disc chipper for landscaping to chip branches and small trees up to a diameter of 100 mm. The FARMI CH 100 F can be mounted onto a small tractor giving a compact chipping machine in gardens, parks, yards and road sides. Two knives and an anvil take care of chipping and feeding. CH 100 F chipper is available as a tractor PTO versions or as a hydraulic driven option.
1992 MORBARK 30RXL WHOLE TREE CHIPPER ENGINE 3412 860HP STARTS AND RUNS GOOD 3 KNIFE, GOOD PADDLES, GOOD FACE PLATE, FEED DECK CHAIN NEED WORK CHIPPER IS WORKING EVERYDAY FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM
Call for Price
1994 Morbark 23 WCL Whole Tree Chipper Engine is a 3412, Seperator, Enclosed Fold Down Cab with Heat, 6 Sets of Knives and New Anvil, Ready for the Woods Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
Call for Price
1996 Morbark Model 20 Whole Tree Chipper ,Caterpillar 425 HP Engine, Enclosed Cab with Heat and AC, Needs a Condenser for the AC, Machine has Separator ,Ready for the Woods... Overall Length 21’6” Overall Width 8’0” Overall Height 13’6” Weight 10,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 249,500
Cat 3412E 860hp Engine status report shows 43% average load factor, 3317 idle hours. 8899 hours on original engine. Completely serviced and runs properly. Morlift 500 loader with tight grapple, A/C cab all nicely fitted. Auxiliary air compressor Michigan model 40 knife grinder Extra knives Very sound, tidy chipper throughout. Call for complete condition report.
Call for Price
2014 Morbark Flail 223 Debarker, has a Caterpillar 9.3 that's been deleted. It has 9,249 frame hours and 600 on the engine rebuild. New Hydraulic Clutch Last Year, New Rear Feed Wheels 23" Capacity Ready for the Woods. Length (transport) 33'5" Height (transport) 9'11" Width 9'10" Weight 46,700 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.