Mobile Wood Chippers For Sale

1979 Morbark 22 chipper with slide boom. Rebuilt KT600 motor. Low hrs. Hydraulics good. New clutch, upper and lower belly pan, faceplate, 2 paddles, sprockets. Liner redone. Cat chain is 50%. Liner in throat redone. Whole tree chipper 1x 3/4 chip. Sandblasted and painted. Tires hold air and are 50%. Cell 315-796-7450

2022 Morbark 30/36 Tree Chipper Serial No. 466-1299. Model 30/36 Towable Whole Tree Drum Chipper, Advantage 3 Series Drum, Cat C15 600 HP Engine. 11.5’ Infeed Conveyor Sloped with 2-Strand Chain (for aggressive feeding), Direct Flow Chip Discharge with Hydraulic Chip Deflector, Wireless Remote, Tandem Axle. Engine is still under factory warranty. Hours: 1,550. Location: Schuylkill Haven, PA Asking Price: $275,000.00

1995 Morbark 27RXL Chipper, Good Condition, Runs Strong, Rebuilt 800HP Cat Diesel, 400 hrs, Many New Parts, Ready to Work, Asking $75,000, NO TEXTS!! 207-743-1025

2023 Bandit 2590 Whole Tree Chipper -300 Hours -CAT C18 755H.P -Deleted NO DEF -All the bells and whistles. -Just serviced -Remote -Reversible knives

2006 Bandit 2090 20” Drum Chipper, John Deere 200hp with 1803 hours, Auto Feed, Winch, Hydraulic Turn Discharge and Jack. Weight: 19,700 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Bandit 1590 18” Drum Chipper, 140hp John Deere with 5000 hours, Winch, Telescoping tongue, Cone holder, Hand crank turn and height adjustable discharge, Lift cylinder, Auto Feed, New engine harness, Just serviced and tires, One owner in very good condition ready to work. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 Bandit 2090xp 20" Drum Chipper, Cummins 350hp with 2378hrs. New clutch 500hrs ago, Radio Remote, Hydraulic Stabilizer, Hydraulic Discharge. Weight: 19,700 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Bandit 2290 Track Whole Tree Chipper, Equipped with a Deere 600 HP, No DEF, Pro Heat, Infeed Chain, Wireless Remote, 314 Undercarriage is 85-90%, Reversing Fan, PT Tech Clutch, 2400 Original Hours, Ready for the Woods. Length: 21’ Width: 10’ 2” Height: 11’ 6” Weight: 40,000 - 46,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Cat C-18 755 HP Only 1100 Hours

2015 Bandit 2290 Whole Tree Chipper, Only 4200 Hours, Cat C-13 440 HP Turbo Engine, Newer Computer and Brains Installed, needs new bearing on infeed tray. Ready for the Woods. Length: 21’ Width: 10’ 2” Height: 11’ 6” Weight: 40,000 - 46,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, et

2013 Bandit 2290 Track Chipper with 5,700 Hours, Deere 600 HP Turbo Engine, Caterpillar 325 Undercarriage, Infeed System 5-1/2' Wireless Remote System, Enclosed Cab with Heat and AC, Electronic Controls updated by Bandit, Pumps updated to a larger pump, 2nd Owner. Ready for the woods. Weight:40,000 - 46,000 lbs Length:21 feet Width:10 feet 2 inches Height:11 feet 6 inches Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2022 Bandit INTIMIDATOR 15XP Chipper with 378 hours on a PSI 5.7L 165 hp Engine, No PTO, Gas Engine, Murphy PV380 Panel W/ Reversing Auto Feed. Length:15’ 7” Width: 6’ 6” Height 8’ 8” Weight: 8,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2010 Bandit 2290 Track Whole Tree Chipper, 6,000 Hours, John Deere 350 HP Engine, 7 sets of extra knives, Babbit Included, Enclosed Cab with Heat and no AC, Rotobec Grapple, Undercarriage is 75%, Cat Infeed Chain 5-1/2 Foot long, Ready for the Woods. Length: 21’ Width: 10’ 2” Height: 11’ 6” Weight: 40,000 - 46,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

New In Stock Bandit 3090 Tracked Whole Tree Chipper.

2012 Bandit 3090 Tree Chipper 24" Diameter Capacity 26" x 36" Opening Cummins 600 HP Only 700 Hrs New Drive New Pump New Hoses New Belly Plate New Auto Feed

New Bandit 2290 Tracked Whole Tree Chipper, In Stock for Sale or Rental.

2019 Bandit Intimidator 15XPC Brush Chipper, Gasoline Engine, Trailer Mounted, Hour Meter Reads: 512

2005 Bandit 2400T Whole Tree Track Chipper , Only 3,021 Original Hours, Undercarriage is 95% Enclosed Operators Cab with Heat and Cold Air, Caterpillar 765 HP Turbo Diesel Engine, Cat Infeed Chain with 4 Roller Feed System., Autofeed , Hydraulic Swivel Discharge, Hydraulic Flapper Engine Pre Cleaners Hydraulic Oil Coolers Rotobec 360 Degree Grapple... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1994 Brush Bandit Model 250 Brush Chipper, Equipped with a Cummins 4BTA3.9 Turbo Diesel Engine, Engine reading 2,000 Hours, Rockford Clutch, Machine recently serviced and has a new turbo. Ready for work. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Bandit 3090 4,600 hours on the Cat C18 765 HP Engine, Tires are 11R x22.5 length of unit 39'7" width 9'9" Height 12'4" weight 54000 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.