Feller Bunchers For Sale

2002 HYDRO-AX 611EX FELLER BUNCHEr Reduced One Owner Low Hours 7800 8.3 Cummings 22" Hydro Ax Head With Side Cut Hydros And Hyd Pump 200Hours 28L 2@100 2@ 25 Back Up Cutter

2018 John Deere 643L, 3161 hrs., Felling Head, Heat/AC, all functions work properly and is ready for the woods, $179,000

2010 John Deere 843K. 8400 hrs. 28L tires (1 new, 2 60%, 1 40%) Still a good cutter. Bought a track cutter and this one is just sitting and not being used. Has normal leaks for a machine this age. Would be a good cutter for a small crew.

2019 Komatsu XT445L-5, 875 hours, JP Skidmore CF-22 head, has cut to length software, fire suppression system, serial number A80010, machine is in excellent condition and has just been fully serviced by Komatsu, company had a pellet mill which was sold and the processor is no longer needed for that side of the operation. $400,000 607-359-2201

2025 Tigercat LX830E only 400 Hours 5 Year Warranty Fixxed Head 43" Bar

2007 Valmet 475FXL, 4418 Original Hours $150000 Quadco 24B 360 Head, Power Stick, Runs Great, Cut Wood Tomorrow Valmet/Timbco FXL not EXL. Has a bigger bottom off a PC400 as an FXL vs the CAT EXL. Stable on steep ground and big timber. Call or Text 603-991-4087

2006 Timbco/Valmet 475EXL Feller Buncher Serial: CW4C-2609-060105 Hours: 4789 Description: Timbco 475 EXL with CAT Bottom, Star Rollers, CAT Bunching head, Bunching stick (1 Foot Longer), Turn Table/Swing Gear Bearing Replaced at 4785 Hours! Located: Suffield, CT Price: $150,000.00 Call/Text: 603-991-4087

Timbco 445B, completely resealed rexroth valve, Cummins engine, rexroth pumps, Cat finals, equipped with 32 inch cut Timbco lateral tilt Barsaw. Just serviced . Priced to sell

TIMBERPRO MODEL TN735D TRACKED FELLER BUNCHER (NON-LEVELING). 350HP CUMMINS STAGE V ENGINE. DUAL 90CC TRACK PUMPS (CLOSE LOOP DRIVE), 175CC IMPLEMENT PUMP. CONTINUOUS SWING LOHMANN GEAR BOX. HYDROSTATIC TRACK DRIVE SYSTEM. RAD/OIL COOLER W/AUTO REVERSING FANS.HYDROSTATIC CHARGE RELIEF HEATER. HYD TANK VACUUM PUMP.ELECTRIC HYD FILL PUMP. IQAN (MDL) CONTROL SYSTEM VOAC (PARKER)CONTROL SYSTEM. GULLWING ACCESS FOR SERVICING FIRE SUPPRESSION TN735- 10'4" WIDTH WITH 600mm TRACKS. SAE CERTIFIED CAB W/3 ESCAPE ROUTES. PRESSURIZED CAB W/FILTERED AIR. AC & HEATER W/CIRCULATION FAN,HORN. AM/FM RADIO W/IPOD INPUT. 1-1/4" FRONT WINDOW. LED LIGHTS. LED LIGHTING. SEATS INC-4-POINT SEAT BELT. 12V CONNECTOR W/AUX POWER. HORN BACK UP ALARM 24V ELECTRICAL SYSTEM W/DISCONNECT. EXHAUST MUFFLER WRAP. TRACK SPEED CONTROL SYSTEM. LOHMANN FORESTRY FINAL DRIVE. EXTENDED REACH FELLER BUNCHER BOOMS W/TOOL TILT. TOP TRACK SLIDES. HARDENED BEARING. HYDROSTATIC SWING. ESPAR HEAT SYSTEM BeGe SEAT REAR MOUNTED CAMERA CELL PHONE HOLDER BERCO 600SG HD D7G RAILS/SHOES COMBO HYDRAULICS. FELLER BUNCHER + CONTROL FALL. PREFORMANCE PACKAGE TREE DEFLECTOR-STICK BOOM TREE HOSES. AG RED COLOR KOMTRAX MONITORING SYSTEM

1997 Barko 885 Feller Buncher Hotsaw Rubber at 60-70% Includes spare 22" hotsaw head Runs and operates good

Barko 775B Cutter 28L x26 tires

Bell Ultra T 8104 hours Runs and operates good Call for details

1993 Bell Ultra T Track Feller Buncher, Engine Deutz 80 HP Diesel Engine, Hour meter showing 9,500 Hours, 28" Dangle Head Saw, 3/4 " Bar and Chain, Enclosed Cab with heat Joystick Controls, Ready for the Woods. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Bell Feller Buncher 3 wheeler SN BCH28887 Runs good Swivel motor on head leaks a bit Rubber is weak

2014 Cat 522B Feller Buncher with 360 Degree Hotsaw, Low 5350 hours. Price Includes a complete new Undercarriage. Good running machine.

2004 Caterpillar 521 Hotsaw Approx 11k hours Great undercarraige Runs and operates good

2016 Caterpillar 521B Excavator Feller Buncher, 6737 Hours, Quadco Saw Head, Cab/Heat/A/C, New Cab Glass, Please Call For More Info

Caterpillar 573 Feller Buncher Hotsaw Hours and year to be confirmed Good rubber On job running daily

2018 Cat 522B -26” Quadco Hot Saw -Extend long frame tracks -1,500 hours on complete new undercarriage -New Hydraulic pumps