Skidders For Sale
Skidders -
One of the most utilized machines in Logging as they move the log(s) and cut timber to a staging area to be loaded. A typical skidder has (4) tires, front push blade and pull timber with a Grapple or Cable; 6-wheel skidders, dual-wheel skidders and track skidders are sometimes used for different terrain and logging applications.Category
Skidders
489 Results Found
$ 65,000
Call for Price
Arch - Single Function Blade Emissions Level - EPA - EPA TIER 4f Emissions Level - EU - IV Emissions Level - Japan - STEP 4 FINAL Online Owner's Manual Radio - AM FM CD Radio Regulatory Marking Regulatory Status - CAT_Korea Regulatory Status - CAT_NR_EPA/CARB_MLIT_EU_R120_China Export ROPS - Enclosed Ultra Low Sulfur Diesel Fuel Wheeled Winch
$ 30,000
$ 24,000
2000 CAT 518 log skidder $24,000 Tire size 2131-26. Motor rebuilt in 2023. New radiator installed at the same time. Regular maintenance always done. Gearmatic winch. Currently on a job site near Port Allegany, McKean County, PA.
$ 47,000
$ 23,500
FMC 210 Track Cable Skidder, Detroit engine rebuilt less than 1,000 hours, runs and operates. Price Reduced $23,500 L S Forestry 717-989-2444
$ 43,500
2005 Franklin Q80 Dual Arch Grapple Skidder with Winch and Ice Chains all around. 6 BT Cummins motor, with 7,926.3 Hours. Tight center pins and walking beams. Model # O80CM-36, and Serial # 18664. $43,500 OBRO Please call 413-274-0180 or email [email protected] for more information.
$ 85,000
2019 648L II John Deere Skidder brand new dbl diamond chains 8,000+ hrs good running machine. 716-397-3329
$ 149,000
$ 40,000
$ 99,000
2015 Deere 748L Skidder, Dual Arch Grapple with Winch, Steering Wheel Machine, 35.5 Rubber, Clean Machine Inside and Out
$ 57,000
Prentice 490 Dual Arch, Cummins 6BTA 173HP, weight 32,600, new main bearings in engine, replace torque converter, new transmission controller, replace all cylinders but grapple, new bushings in arch, new turbo, new hyd pump, new hyd coolant pump, hyd hoses (as needed), new windows and screens, repairs have always been done as needed. $57,000 724-840-8069
$ 219,000
2017 Tigercat 625E, 9500 hours, EHS transmission, 45/78x32 front tires at 80%, dueling rings, 28x26 rear tires with 23.1x26 duals at 80%, joystick steering, rotating seat, clock heater, fuel fired pre-heater, LED light package, clean one owner machine. Machine is ready for the woods. $219,000
$ 85,000
2013 Tigercat 610C Dual Arch Skidder SN 6100727 tire size 30.5/32 heat/AC 2000 hrs on new engine 3000 hrs on new hydraulic pump 11600 hrs works as it should new dbl diamond chains. $85,000
$ 65,000
2013 Tigercat 620D- 6.7L Cummins , turn around seat, new 30.5s on the rear, dual arch, new a/c compressor, new alternator , extra light package
$ AUCTION ITEM
$ AUCTION ITEM
#114 • 2020 Tigercat 602 Dual Arch Grapple Skidder SN: 6023005. Engine: FPT N45 Diesel. Meter reads: 4,522 hours. Transmission: Hydrostatic. Tire size: Primex Log Stomper Extreme Ts 30.5 L32. Tire chains: No. Blade size: 80". Grapple: Yes. Cable winch: Yes. ROPS: Closed. Heat: Yes. AC: Yes. Type of controls: Controls. Features and Notes: 2nd owner machine; Runs and operates good, clean, tight, woods ready machine. Contact Myron Nissley with any questions 574-536-2481. Location: 572 Furnace Road, Airville, PA 17302
$ 25,000
$ 35,000
1994 Timberjack 450C with grapple, good running condition, working daily. $35,000 OBO 270-704-6072
$ 47,900
1998 Caterpillar 525B Grapple Skidder, No Winch, 12,700 Hours, Tires are 30.5 x 32, Good Tread, New Hydraulic Pump, Axle has New Bearings, Center Section is Tight, Front Axle Bearing Replaced, Two Seals in Cylinder Replaced, New Bearings in Cradle, Ready for the Woods. Operating Weight 35,800 lb Overall Length 21.29ft in Overall Width 11.11ft in Height To Top Of Cab 10.61ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 44,500
Have 5 525C model grapple skidders they range in age from 2008 thru 2014 hrs range from 14,000 thru 16,000 all are pulling wood now or have been in the last few weeks. Prices range from $29,500 to $44,500 call for more info