Forwarder For Sale

2010 CAT 564 Forwarder, New Bogie Bearings, New Grapple, New Injectors, 14,500hrs, $119,000 - Call 231-269-4100

1990's Franklin 170 Forwarder, Brand New Motor & Clutch w/Papers, Many New Parts, Runs 100% Purchased for one job, no longer need. $16,000 or close offer. 717-821-1683

2013 Ponsse Buffalo, with 10900 hours c/w 2 sets of tracks 90% and 50%, tires all 80%, Very good condition, night heater, K90+ crane with new grapple, $180,000obo Delivered Call Steve (518) 361-2507 Vermont

RARE 1994 single bunk Timberjack 230A forwarder with 2000 Cummins 4BTA diesel. 5 speed with hi/lo, Serco loader. Very maneuverable, forward and load your truck with this ready-to-go machine. Seat swivels and you can easily drive machine both directions. Many seals have replaced and cylinders repacked, including boom cylinders, grapple cylinder, hoses etc. Recent new fluids in front and rear diffs and transfer case. New center pins last summer, fresh oil change, rear tires are very good, front not as good. Recently rebuilt injector pump. Not sure that hour meter works. Ready to work. REDUCED to $39,000

1999 Timberjack 610, New Indexator Rotator & Bucket Cylinder, Heat/AC, Joystick Controls, Manual Transmission, 75% Rubber, Includes One set of Tire Chains, 10,000 Hrs., Solid, Tight & Dry. $45,000 - Call 989-539-9842

2014 Timberpro 830 Forwarder, 5,985hrs., 710 Tires, (2) Sets of Clark Tracks, Espar Heater, Great for Mats, Serviced and Ready to Work, $290,000 - 207-458-7124

2006 Valmet 860.1, 11,022hrs., 6-Wheel, 16 Ton, New master pump. Just Replaced many of the hoses, Working Dail, Call - 717-320-2025

1998 Valmet 890 Forwarder 8 wheeler tracks for all wheels, Sisu motor, running functioning unit with no known mechanical issues. For more information call 1-509-675-6121 thanks

2004 Valmet forwarder 840.2. Serial number 84021129, complete new center section, new windows front and back, new monitor, 1 new tire rest of tires are fair, valve bank needs rebuilt, easy starting, runs great. $65,000 firm 814-447-5662

1995 Valmet 546 $45000 Everything works as it should. Strong overhauled engine. AC works in the summer and heater in the winter. Has new Wabasto pro heater, new batteries and LED lights all around. Frame extended and center pivot reinforced to haul longer or larger loads. Call Brian 218-259-2780

In addition to cutting edge firewood producing technology, Firewood Automation also offers a complete line of trailers. Like the 900 Kit that offers many options and configurations, call for complete details. The Off-Road trailers we offer in sizes ranging from ATV to more than 10-ton capacities. Options include winches, log loaders to fit your application, PTO, tractor plug-in and gasoline mounted hydraulic drive systems are all available. Let Firewood Automation streamline your hauling needs as well as your firewood production.

2014 Barko 612 Forwarder, 6WD, Like New Olofsfors Tracks, 9K Hours, Clean Machine.

2016 CAT 564 5,600 hours, , set of tracks, exc. Rubber all around, Pre Heater, Heat /A/C, CB Radio, Cat power, Hydrostatic transmission, Sure Grip controls, Joystick steer, Super clean/1 owner, $229,500

2014 CAT 564, Set of tracks, 6,660 Hrs., Cat powered, Hydrostatic trans. shifts perfectly, 710 rubber, Heat, A/C, Pre Heater, Bypass 360 Bucket, Sure Grip controls, $189,500

2010 Cat 574 Forwarder, 8WD, Tracks all the way around, Clean Machine inside and out.

Meter reads 4,497 Hours. Excellent working 4 speed powershift transmission. 6068T Deere power, runs like a top! Rear rubber is 700/50-26. One rear tire is in pretty rough condition on the sidewall. Front rubber is 30.5L-32 rubber. Squirt boom. Heat and A/C. Joystick controls. Good set of tracks included with the sale. Clean inside and out. New paint and decals. New transmission filter and main transmission line and fittings. Fresh fluid. New shift solenoid. All windows and lights are good. Loader works as it should.

2005 Fabtek 546C, complete re-built Cat engine, new rear-end, new jib cylinder, new rotate motor on bucket, 700 rear rubber, 30.5x32 front We may take trades depending on what you have. We can help with shipping costs. Heat & A/C. Hydrostatic transmission, shifts great. New windows. New drive shaft. Recent full service of all fluids and filters. Just over 16,000 hours. Very well cared for and ready to work!!

FABTEK 344B SINGLE BUNK FORWARDER 4 CYL JOHN DEERE POWERSHIFT JOYSTICK CONTROLS EXTENDABOOM 28L-26 RUBBER

FABTEK 346B DOUBLE BUNK FORWARDER 4 CYL JOHN DEERE POWERSHIFT JOYSTICK CONTROLS

1976 IRON MULE 4500 SINGLE BUNK FORWARDER 3 CYL PERKINS STANDARD SHIFT LEVER CONTROLS 18.4-26 RUBBER