|
1998 DuraTech HD-12 Tub Grinder - CAT 3408 Engine - 503 Horsepower - 6000 Hours - See Info - Average Condition
Equipment Location:Largo, FL
Apollo Equipment
800-982-2844
|
|
EARTHSAVER P14SHD700 just came off of a job last summer. Videos of it working on job are available $75,000
Equipment Location:South Boston, VA
Mast Enterprises Equipment LLC
434-446-2401
|
|
1996 CG 7000 Farmhand tub grinder powered by 1976 A.C. 7080 tractor (181 HP) - 2 screens included - Turn key machine - Many new parts - Very good condition
Equipment Location:KS
Apollo Equipment
800-982-2844
|
|
1989 Haybuster H1100 Tub Grinder - 120 horsepower CAT 3306 engine - Very good condition
Equipment Location:Largo, FL
Apollo Equipment
800-982-2844
|
|
1991 Haybuster HD-10 Tub Grinder
Cat 3306 Engine
Well Maintained
Job Ready
Equipment Location:Ohio
Mitch Stevens
828-773-6986
|
|
1000hp CAT Engine, NEW Cat long block installed by Cat dealer.
New Paint. Price: $345,000
The equipment listed is for sale by owner. Contact Ethan at 717-436-5454 for more details and for current hours.
This Is An Advertisement For An Item That Is For Sale By Owner. This item is not owned by CW Mill Equipment Co., and CW Mill Equipment is not a broker or an agent for either the buyer or the seller of this piece of equipment as the listing is made only as an advertisement. CW Mill will not assume any liability associated with any possible losses associated with this advertisement or any prospective sale
or other future transaction that may result for the buyer, seller, or other. All information provided is based upon information made available at the time of the listing and is subject to change. We reserve the right to correct any errors in any equipment listing including incorrect photos, prices, and any other details.
Pre-purchase inspections and detail confirmations are required, and all items are subject to prior sale.
Note: Other than HogZilla™ & CW Mill™, all other product names, logos, trademarks, and other brands shown or referred to within CW Mill Equipment's sales material are the property of their respective trademark holders. The trademark holders that are not affiliated with CW Mill Equipment do not sponsor or endorse CW Mill's materials. All rights associated with other trademarks belong to their respective trademark holder.
Equipment Location:Mifflintown, PA
C W Mill Equipment Co., Inc.
785-284-3454
|
|
Make: Hogzilla
Model: 1354L
Year: 2006
Engine: Cat C-18
Horsepower: 700
Hours: 511
Hitch: 5th Wheel
Info/Extras: Rods re-chromed, 12 new tires, fully serviced, remote
Condition: 9
Apollo Listing #: 005002
Equipment Location:Largo, FL
Apollo Equipment
800-982-2844
|
|
HogZilla TC 1564-P Tub Grinder
Product No. 4612
HogZilla TC 1564-P Tub Grinder
2001
3840 Hours
1200 HP
Detroit V16 Engine
Spare Computer
New Shear Bars
Several New Hammers and Bits
Off The Road Pull Out Truck Included
price: $225000
Machine Type: Forestry Tub Grinder
Manufacturer: HogZilla
Model: TC 1564-P
Year: 2001
Machine Location: North Carolina
Equipment Location:North Carolina
|
|
Make: Morbark
Model: 1300
Year: 1999
Engine: Cat 3412
Horsepower: 875
Hours: 499 on Complete Rebuild
Hitch: 5th Wheel
Info/Extras: Mill is like new, All new bearings, new tires, complete update on all
Condition: 10
Apollo Listing #: 005024
Equipment Location:Largo, FL
Apollo Equipment
800-982-2844
|
|
1998 Morbark 1300 NCL Tub Grinder - Rebuilt 1000 horsepower CAT 3412 engine - Very good condition
Equipment Location:Largo, FL
Apollo Equipment
800-982-2844
|
|
2008 Morbark 1300B Tub Grinder - Cat C-27 Engine - 1050 Horsepower - 3380 Hours - 5th Wheel Hitch - Very Good Condition
Equipment Location:Largo, FL
Apollo Equipment
800-982-2844
|
|
1997 Olathe 866 Tub Grinder - Engine replaced with 325 horsepower John Deere (400 hours) - New clutch - Good condition
Equipment Location:Largo, FL
Apollo Equipment
800-982-2844
|
|
1995 Toro Pro-Grind 5000 Tub Grinder - Cummins Engine - 750 Horsepower - 2749 Hours - Extras - Very Good Condition
Equipment Location:Largo, FL
Apollo Equipment
800-982-2844
|
|
1996 Model TC-1464P HogZilla Grinder in Excellent Condition - $345,000
Approximately 11,500 Hours
• Engine Rebuilt in 2010 - Approx. 3,400 hours on Engine
• Torque Converter Rebuilt in 2012 - Approx. 1,500 hours on Torque Converter
• Complete Grinder Rebuild July 2004. Originally powered with a Cummins.
• Grinder was repowered with an 860hp CAT Engine.
• New Hammermill Installed June 2011 - Approx. 2,000 hours on Hammermill
This Is An Advertisement For An Item That Is For Sale By Owner. This item is not owned by CW Mill Equipment Co., and CW Mill Equipment is not a broker or an agent for either the buyer or the seller of this piece of equipment as the listing is made only as an advertisement. CW Mill Equipment will not assume any liability associated with any possible losses associated with this advertisement or any prospective sale or other future transaction that may result for the buyer, seller, or other. All information provided is based upon information made available at the time of the listing and is subject to change. We reserve the right to correct any errors in any equipment listing including incorrect photos, prices, and any other details. Pre-purchase inspections and detail confirmations are required, and all items are subject to prior sale. Note: Other than HogZilla™ and CW Mill™, all other product names, logos, brands, and other trademarks shown or referred to within CW Mill Equipment's sales material are the property of their respective trademark holders. The trademark holders that are not affiliated with CW Mill Equipment do not sponsor or endorse CW Mill's materials. All rights associated with other trademarks belong to their respective trademark holder.
Specifications subject to change without notice. Product(s) offered for sale may vary in design.
HogZilla is a registered trademark of CW Mill Equipment Co., Inc., Sabetha, Kansas.
NOTE: Other than HogZilla® and CW Mill™, all other product names, logos, brands, and other trademarks shown or referred to within CW Mill Equipment’s sales material are the property of their respective trademark holders. The trademark holders that are not affiliated with CW Mill Equipment do not sponsor or endorse our materials. All rights associated with other trademarks belong to their respective trademark holder. All CW Mill Equipment Company sales are subject to CW Mill Equipment’s standard terms and conditions. You can receive a written copy of those terms and conditions by contacting CW Mill Equipment. All for sale by owner listings are provided as a free advertising service only, and no liability for the advertising or any related transaction is assumed by CW Mill Equipment Co., Inc.
Equipment Location:BRENTWOOD, NH
C W Mill Equipment Co., Inc.
785-284-3454
|
|
2004 HogZilla WTC-1354L Loader machine with a C15 CAT 500hp Engine.
Please call Gary for more information - 216-536-5001
This Is An Advertisement For An Item That Is For Sale By Owner. This item is not owned by CW Mill Equipment Co., and CW Mill Equipment is not a broker or an agent for either the buyer or the seller of this piece of equipment as the listing is made only as an advertisement. CW Mill Equipment will not assume any liability associated with any possible losses associated with this advertisement or any prospective sale or other future transaction that may result for the buyer, seller, or other. All information provided is based upon information made available at the time of the listing and is subject to change. We reserve the right to correct any errors in any equipment listing including incorrect photos, prices, and any other details. Pre-purchase inspections and detail confirmations are required, and all items are subject to prior sale. Note: Other than HogZilla™ and CW Mill™, all other product names, logos, brands, and other trademarks shown or referred to within CW Mill Equipment's sales material are the property of their respective trademark holders. The trademark holders that are not affiliated with CW Mill Equipment do not sponsor or endorse CW Mill's materials. All rights associated with other trademarks belong to their respective trademark holder.
Equipment Location:Cleveland, OH
C W Mill Equipment Co., Inc.
785-284-3454
|
|
1998 Morbark 1400 Tub Grinder - Rebuilt 800 horsepower CAT 3412 engine - Very good condition.
Equipment Location:Largo, FL
Apollo Equipment
800-982-2844
|
|
1996 Morbark 1200 Tub Grinder - 800 hours on rebuilt CAT 3412 - Morbark completely rebuilt grinder like new from the mill up - New mill - New bearings - New augers - New auger shaft - New hammers - New tips - New screens - New tub floor - New tub wheels - New conveyors - Hydraulics - Excellent condition - Wireless remote
Equipment Location:KS
Apollo Equipment
800-982-2844
|
|
1993 Morbark 1200 Tub Grinder - 750 horsepower CAT 3412 engine - Fair condition.
Equipment Location:Largo, FL
Apollo Equipment
800-982-2844
|
|
2004 Morbark 1300 Tub Grinder - 1000 horsepower CAT 3412E engine - Mag head pulley - Very good condition
Equipment Location:Largo, FL
Apollo Equipment
800-982-2844
|
|
1998 Morbark 1300 Tub Grinder complete rebuild on Cat 3412 Engine $38,000 with 2000 hours on it, new clutch,new 4×6 screen, new bearings and housings, , New Tires, New Light Bar, Location Ohio, Its Ready to Work! Priced Right! Caterpillar 1050 HP Engine, with Loader, Checked out by Morbark Rep , Working Daily
Equipment Location:Elkins, WV
Reckart Equipment Co.
304-614-7939
|