Equipment For Sale

DONALDSON TORIT - 232 RF-8, ...24,000 CFM Baghouse Dust Collector (refurbished 2017) with: Rotary Air Lock & AIRCOM 32" Dia. Explosion Isolation Flap Valve (New 2017) -- Specifications. Approx. 10-1/2' Dia. x 24' H Baghouse with: 7-1/2' H Cone bottom & (232) 8' L cloth filter bags totaling appx. 2,414 sq./ft. of cloth area.Air-to-cloth ratio: 9.94:1; Overall system footprint: 25' x 25'. -- AIRCOM - SNR 800. ...32" Dia. SNR (Safety Not Return) Explosion Isolation Flap Valve: S/N 0977003 (2017); certified ATEX EN 15089; Class 2, NFPA Compliant with: Max. air speed 30 m/s; max. dust concentration: 4 LEL; Kst max. 299 bar m/s; pred. max. 0.25 bar, Pmax. 9 bar; Pipe structure to withstand pressure: 0.25 bar; Explosion resistance of flap 850 mbar;, Min. ignition energy 3 - 10 mJ; Min. ignition temperature 420° C (788° F); Temperature range: –20° C to +60° C (-4° f to 140° F); Range of applicable volumes: 10 - 60 cu. meters (33 - 196 cu./ft.); Anti-opening locks on both flaps. -- 75 HP - 1,780 RPM, TEFC Motor Driving Blower: Rated at 24,000 CFM @12" SP with: 36" Dia. inlet & 30" x 36" outlet. -- KOGER - SIZE 12, ...Rotary Air Lock with: 12" Dia. inlet & outlet 1 HP Motor. -- MURPHY-RODGERS - MRT-12, 10 HP Blower: S/N 1272 with 12" dia. inlet & 8" x 11" outlet. -- ROOTS - 32 U-RAI, ...5 HP Lobe Blower: S/N 0802963165. -- Electrical controls included. -- Actual model is: "232FRW8" (Walk-in unit); estimated shipping weight: 15,500 Lbs. -- Available 1st wk in July or sooner if needed.

DONALDSON-TORIT - 376RFW-10 or 12: Dust Collector45,000 CFM @ 9.7:1 Air-to-cloth ratio; 140" dia. round baghouse with: (376) filter bags of 10' length (oval bags provide for radial movement of bag during cleaning for longer life), total 4,632 sq./ft. filter area. -- Filtration media cleaning via a floor mounted 7.5 HP medium pressure Air Pump (eliminates the need for compressed air, which can be susceptible to condensation and freezing); 36" x 65" return air outlet and 48" x 48" inlet for dust laden air. -- Includes: Rotating cleaning air manifold driven by 0.33 HP motor; (1) NEMA-9 solenoid and diaphragm valve which rotates over the bag openings; walk-in plenum for bag access/maintenance. -- Galvanized steel bag frames with positive bag bolt down to eliminate leakage and ride up of bags once installed; walk-in access door at top of ladder. -- Equipped with: Structural steel support; maintenance platform; caged ladder; bolt-on involute arm; explosion doors (need to be replaced). -- Includes Backward inclined FAN EQUIPMENT: Size 7 BCS floor-mounted Fan set at 45,000 CFM @ 15" SP belt driven at 1,485 RPM; powered by a 200 HP TEFC Motor via OMRON/IDM E7 Series Inverter. -- 24" Rotary Air Lock at the bottom of the 60° hopper. -- Complete with: Pictured electrical controls are included. -- NOTE: New 200 HP electrical motor was replaced recently. -- Unit had an accidental fire at bottom section near hopper causing the explosion doors to burst. Unit still working as they are not returning the air. Can be sold with or without replacement of doors; Cost of which is negotiable. -- Professional dismantling and rigging available at extra cost. Please call!

TORIT - CHECKER BOARD: Control PanelTORIT Checkerboard Control Panel for a DFT3-18 Dust Collector up to a 25 HP Blower.Includes -- Start/Stop push control buttons for Dust Collection System. -- Electric disconnect to shut down power if needed. -- HEPA Filter pressure gauge. -- Alarm with light when dust filters need to be cleaned. -- Pressure gauge showing the air flow in the system. -- Air pressure pulse cleaning controls to clean dust from filters. -- Control box mounted on legs.

TORREDA HIDROPAL-1400 COPY LATHE

TORREDA TORMADEX S.A. PA-1200 Hydraulic Wood Turning Back Knife Lathe:Nicely equipped Spanish lathe with dual hydraulic tracers for making quick work of all your demanding woodturning production runs! ... Great for turning baseball bats!Specifications: -- 47" Max. between centers, 9-7/8" max. dia. without traveling steady. -- 3-1/3" Max. dia. through steady rest (larger dia. of 6.2" cap. OPTIONAL); -- High speed automatic loading, feeder accepts pieces up to 4" square. -- 4 HP Motor with (4) turning speeds, 1,200, 2,800, 3,500, and 4,550 RPM. -- (2) HIDRO "T-75" hydraulic reproducing heads with 3" stroke. -- (2) Top mounted hydraulic knives for tenon or pattern cutting (accepts form tools up to 3" wide). -- 2 HP Hydraulic pump motor with (3) carriage feed speeds. -- Features: Pressure sensitive Hydraulic tailstock with Pressure Regulating Valve needed for small, slender turnings to avoid buckling. Pre-rounding tool in front of travelling steady rest. -- Includes: Safety guard, tooling with several roughing and finishing knives.

Announcing two brand new lightweight, fixed tooth brush cutter mowing attachments from Torrent Mulchers - the EX28RPM & EX30RPM. Designed to handle anything from mowing grass to whole tree removal, these powerful lightweight mulchers will attach to almost any carrier. EX28 RPM TECHNICAL SPECIFICATIONS Operating weight - (Standard) 450 lb/200 Kg Cutting width - 28 inches Rotational speed - 3200 RPM (maximum) Excavator power requirement - 25Hp or 18.5 Kw (minimum) Excavator weight range - 3 to 5 tonne Cutter type - fixed spherical Cutter quantity - 28 Drive type - direct Power transmission type - hydraulic fluid power Hydraulic motor type - fixed axial piston Maximum hydraulic system pressure - 5000 psi/345 bar (maximum continuous) Hydraulic oil flow requirement - 13 usgpm/50 lpm (minimum)

Announcing two brand new lightweight, fixed tooth brush cutter mowing attachments from Torrent Mulchers - the EX28RPM & EX30RPM. Designed to handle anything from mowing grass to whole tree removal, these powerful lightweight mulchers will attach to almost any carrier. EX30 RPM TECHNICAL SPECIFICATIONS Operating weight - (Standard) 700 lb/313 Kg Cutting width - 30 inches Rotational speed - 3200 RPM (maximum) Excavator power requirement - 30 Hp or 22 Kw (minimum) Excavator weight range - 6 to 12 tonne Cutter type - fixed spherical or fixed beaver Cutter quantity - 18 Drive type - direct Power transmission type - hydraulic fluid power Hydraulic motor type - fixed axial piston Maximum hydraulic system pressure - 5000 psi/345 bar (maximum continuous) Hydraulic oil flow requirement - 18 usgpm/68 lpm (minimum)

ASSORTED MOTORS, IN ALL HP & SPEEDS AVAILABLE. Chipper and band mill motors 400HP, US, 585 RPM, DRIP, FRAME 1689S. TOSHIBA 200 HP at 1200 RPM. General Electric 300 HP, 514 RPM, 460 Volt for direct connect, Old style GE frame 17A's and 17B's to redesign up to 500 HP @ 450 RPM. 300HP ALLIS CHALMERS MOTOR 514 RPM, DRIP, 30KS8 FRAME. Many other sizes available CALL FOR YOUR SPECIFIC NEED. From 10HP to 600HP. See gear reducers with various HPs and ratios (see Gear Reducer listings).

Trace Machine Pallet 4 Stringer Nailer w/Stacker & 56in X 11ft 6in Pallet Rollout

Self-propelled track carrier Self-powered slasher Radio remote control No hydraulics or electrics Reguired

Trackside Mfg Stretch Wrapping Machine 31"x10' infeed and outfeed, 24" belt, no power

Trailblazer 302 Air Pak • Miller Suitcase RC12 wire feeder • Hypertherm PowerMax 65 plasma cutter • 20 gal. 160 psi. Onboard air supply • Harris heavy duty cutting torch w/hose reel • Air hose reel (regulated) • 12/24 volt jump starter • 12/24 volt battery charger • Stick welding cables • Drawer cabinet • Fork pockets w/safety chains • Fire Extinguisher • Engine hours, 502 • Air compressor hours, 283 • Approximate dimensions 4' x 6' x 4' • Approximate weight 2080 lbs • Accessories include, Digital Infinity Series welding helmet, Tire inflater, Diffuser tips, Contact· tips, Gas nozzles, Plasma cutter tips, etc. • Argon and Oxygen tanks not included

1988 Trail Mobile Flatbed 48' Spread axle Rebuilt frame New air ride New hardwood deck Lights good Brakes good Aluminum rims Low pro 22.5 tires (need replaced soon)

2009/2010 53' x 102" Transcraft Conestoga (Curtain Side)Flatbed VIN# 1TT F532S x A 1088115 Merlott Vango Tarp.

2012 Transcraft 48' aluminum flatbed trailer w/air ride VIN 1TTF-482C9D3756763

53' Step Deck Aluminum top steel frame Tires are 40% Brakes are 50% Seller Upgraded Still In Use

2011 TRANSPORT 5 AXLE LOG PUP AIR RIDE SUPER SINGLES ALUMINUM STAKES 24' DECK

Tree 2UVR Vertical Milling Machine Incudes Elephant Vise Good Condition

2006 Trelan 23 -No blow by and doesn't use oil -New hood jack -New cylinder -10 sets of new blades -Extra set of belts -Disk pockets are in good shape

1989 Trelan 23 Chipper -9000 frame hours -Rebuilt C-27 CAT with 200 hours on engine -New tires -New outrigger piston -Rewired corded remote -New wireless remote -New hoses -New intakes -New bearings in the PTO -Engine Preheater -New Auto-feed system NEEDS PAINT BUT WILL GO STRAIGHT TO WORK!!!