Timberjack For Sale

2006 JOHN DEERE 748GIII SKIDDER 17,XXX HOURS RECENT TOP END DONE ON ENGINE GOOD TIRES WELL MAINTAINED FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

One owner well maintained, new rear 35.5 tires, SWEDA axles, winch, serviced and ready to work.

2018 John Deere 853M -7200 hours -22in JD 360 degree head -Tight and dry -Uc is good Ready to work!!!

2017 Deere 648L Grapple Skidder, Winch, Engine has 8,400 Original Hours, Wide Blade, Center Section is Tight, Undercarriage is 75%, Enclosed Cab with Heat and Air Conditioning, 35 x 32 Tires, New Stick in Steering Drive, DEF Engine, Weight: 42,009 lbs Length: 25 ft 4 in Width: 10 ft 8 in Height: 10 ft 11 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2020 John Deere 437E

2004 John Deere 540G3 -One Owner -Tight and dry machine -23.1.26 new tires -Winch and cable are good -Everything works as it should More Pictures Coming Soon!!!!

JD 1400 axles $3500/pair

2016 John Deere 1010E Forwarder, 10,036 hrs., $149,900

John Deere 540B Skidder Single arch Winch Rebuilt engine about 700 hours ago 28Ls Runs and operates good

2010 John Deere 648H -10638 hours -Engine was replaced at 5k hours -30.5 Tires -Little slack in center not bad -Winch works -Dry -Everything works as it should

2011 John Deere 540G3 -9252 hours (alot are idle hours) -Bump shifter -Center tight and dry -Drive shafts done -Tons of service records in pictures -Winch 4000s -New seat coming before sale -Clean skidder ready to work

2005 John Deere 1110D Forwarder Engine rebuilt by Deere 6k hours ago New center pins, bushings, and bearings by Deere New grapple Repacked all cylinders New AC system Heat Good tranny Good rubber 25,373 hours Runs and operates great Nice straight machine Currently on job daily

2022 Deere 848L-II Grapple Skidder, No Winch, Engine has 4,000 Hours, Fire Suppression, Espar Heat, Enclosed Cab with Heat and Air Conditioning, Ring Chains on the machine Ready for the Woods. Weight 49,348.3 lb Length 333.4in Width 140.7in Height 27.2 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1983 Deere 540B Grapple Skidder, Factory Deere Grapple, Winch, Needs Drive Shaft, New Shaft Cables, Doors Available, Tires are 23.1 x 26 Good Shape, Good Centers, Newer Pump, Centers Good, Ready for the Woods. Operating weight 18,675 lbs Length 242.5 inches Width 103.9 inches Height (ROPS) 115 inches Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1989 Deere 648D Grapple Skidder. Winch, New Winch Drive Line, New Reat drive shaft, Rebuilt Parking Brake, New Clutch, Clutch Plate, Transmission went through, Centers are fair, Tires are 28L x 26, Hours are Reading 2,100 on Meter. Length 22 ft 7 in Width 11 ft 0 in Height 9 ft 8 in Weight 24,440 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Parting out John Deere 903K - Call for Parts and Availability!

2020 John Deere 859M -2400 hours -2900 intermediate head 360 -Leveling cab -28” pads

This 335C John Deere knuckle boon loader operates as it should no problems that we’re aware of. It has 20,965.6 hours on it. It would need some work to be confident in it in the woods but on the yard it’s always done good. If interested in this machine call Gavin 601-394-7796 Tim 251-366-3237 Kameron 251-242-5493 The machine is being sold from State Line, Mississippi, 39362, 467 St Peter St

2022 John Deere 648L2 Skidder -400 hours -Full warranty -First dealer service at 500 hours -Winch -17.5 sq grapple -30.5x 32 tires -America foggy fire extinguisher system Runs strong ready to pull!!!!!!

2018 Deere 853M Feller Buncher Equipped with a FD55 Cutter Head, 6,600 Original Hours, Enclosed Cab with Heat and Air Conditioning, Undercarriage is 60%, Repacked Cylinders on Head, 2022 Swivel Bearings Replaced, Serviced Recently Ready for the Woods. Operating Weight 67,704lb Overall Width 10.83 ft in Length Of Track On Ground 12.7 ft in Ground Clearance 31 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.