TimberPro For Sale

2021 Tiger Cat LSX870D -3432 hours -Leveling cab -Grapple being rebuilt -Tight and dry Clean machine!!!!

2002 Tigercat 845B Feller Buncher, Equipped with a Tigercat Hot Saw with 45 Degree Lateral Tilt, Enclosed Cab with Heat and Air Conditioning, Good Undercarriage. Length 16 ft 2 in Width 10 ft 9 in Height 11 ft 0 in Weight 57,100 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2015 Tigercat 610E Track Skidder -10271 hours -Track system in great shape (800 hours) -Serviced regularly and just got a look through -Machine will pull anything anywhere -Tight and dry

2005 Tigercat 240B Log Loader -11412 frame hours -Heat/cold ac -Delimber -Lights -Decent tires -Brakes -New knives -New topping saw bar/chain -Good Tigercat grapple -On the job working

Recent engine, Extended fuel tank, just serviced, ready to go!

9500 hours EHS transmission 45/78x32 front tires at 80% Dueling Rings 28x26 Rear Tires With 23.1x26 Duals At 80% Joystick Steering Rotating Seat Clock Heater Fuel Fired Pre-Heater Led Light Package Clean One Owner Machine Blade- Yes Chains- Yes Machine Is Ready for The Woods.

2017 TIGERCAT 620E DUAL ARCH GRAPPLE WINCH SKIDDER 6 CYL CUMMINS JOYSTICK STEER

724D drive MOTOR ATTACHED TO TRANS WILL SELL TOGETHER OR SEPERATE LEFT drive motor PN#AQ092 $4500.00/RIGHT DRIVE MOTOR PN#AQ093 $4500.00 + shipping Call Gavin 601/410/3416 Call or text Tim 251/366/3237 Located at 467 St. Peter’s st stateline ms 39362

2019 Tigercat H822D, Equipped with a Tigercat 575 Processor Head, New Engine with under 1,000 Hours, Frame Hours 9700, Enclosed Cab Heat, Air, Radio, Undercarriage 85-90%, 28" Single Grouser, Fire Suppression, Ready for the Woods. Length: 35 ft 0 in Width: 11 ft 1 in Height: 10 ft 11 in Weight: 62,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

LOCATED IN BOONVILLE, NY

,718 Tigercat Feller Buncher, Hot Saw, 8800 Hours , Ready to work!

2018 TigerCat 604E -3xxx hours -Winch like new -EHS -Chains -Center is tight

2005 Tigercat 244 Log Loader, 2006 Big John Trailer with CTR Delimber and Topping Saw, CTR Ground Saw, Cummins 5.9 Diesel Engine Enclosed Cab Heat and AC, Ready for the Woods. Length: 15 ft 7 in Width: 10 ft 0 in Height: 11 ft 0 in Weight: 36,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2010 Bandit 4680T Track Horizontal Grinder, Equipped with a Caterpillar C-27 1050 HP Engine,3700 Hours Currently, Undercarriage is 85%, Machine has 2" and 3" Screens, 2nd Owner, Wireless Control, New HG600 Clutch, New Head and Tail Shaft, New Conveyor Belt, Compressor on machine, Ready for Work. Weight 95,200 lbs Width 140 in Height 152 in Length 492 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Tigercat 620D Cummins Dual arch Winch AC/Heat Turn around seat with joysticks New pins and bushings New glass New radiator 30.5 tires (one new and the rest at 80%) 13500 hours On the job working daily

2015 Tigercat 620E Grapple Skidder, Winch, Engine has 12,700 Hours, Enclosed Cab with Heat and Air Conditioning, New Upgraded Transmission, New Rear End, Center Section is around 60%, Needs Joystick Replaced Ready for the Woods. Weight 37,750 lbs Length 27ft Width 12 ft Height 10ft 4in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Very nice 2019 Tigercat dual arch skidder. Ran through our shop and everything checks out mechanically. All new pins and bushings. New glass. Joystick control. HD axles with 95% Firestones. Deep rubber 30.5s. Equipment financing and delivery available.

2015 Tigercat H855C - 20,242 Carrier Hours - 1,600hrs on engine (Warranty till August 2025) - 1,600hrs on Pumps - Original Chains and Pads, Approximately 75% - New Sprockets - Plumbed for Logmax Head - Single Operator Single Shifted

2021 Tigercat 890 Shovel -5600 hours -72” Tmar grapples with about 2000 hours on them -28inch double grouser -Sprockets and rollers are @ 75% -Rails and pads brand new -Serviced regularly every 250 hours -Greased daily

2014 Tigercat 635E, 15,805 hrs., 15k frame hrs., 500 hrs. on rear and front chuck, engine 8k hrs. ago, all pins and the back half were re-done 500 hrs. ago, center has a slight bump in it, cold air, light works, no codes, reversing fan unhooked it 100 hrs. ago, small leak up front, $125,000 (Price includes the 500 hour tracks that are on it, For 10k less, I have a 60% set that can go with it instead)