TimberPro For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 31 of 89
1767 Results Found
Sort By 
Recently Added Items
TimberPro Track groups
Call For Price
TimberPro Track groups
John Deere 903K hydraulic
Call For Price
John Deere 903K hydraulic
John Deere 848G transmission
Call For Price
John Deere 848G transmission
Cummins 8.3 Electronic
Call For Price
Cummins 8.3 Electronic
$ 155,000

2010 John Deere 1010E Forwarder -15,375 hours -Engine was replaced under warranty around 8,000 hours. No documentation. -Recent maintenance and repairs done - -All filters and engine oil changed -Newer front window. Side/ back windows need replacing -LED lights added all around -Runs and operates as it should, working daily!!!!!!

Josh Digirolamo
828-302-7264
Call

$ 105,000

2014 John Deere 1910 -Complete Deere engine has 13,000 hrs -27,000 frame hours -Pumps have 7,000 hrs -Drive motor has 7,000 hrs -New Deere transmission has 7000hrs -Slew bearing and brass has 9000hrs -All cylinders except for one steer cylinder replaced in the last 5000hrs -Extension boom replaced and bucket replaced -Newer front window -A/C and heat work good -7 new Nokian tires in the last 4500hrs tires range from 80-99% -Boogies diffs and planetaries drain clean

Josh Digirolamo
828-302-7264
Call

$ 105,000

2014 Deere 1910E Forwarder, Strong Engine, Has 27,000 Frame Hours, Motor Replaced at 13,000 Hours, Pumps at 7,000 Hours, Drive Motors replaced at 7,000 Hours for Preventative Measures, Slew Bearings and Brass replaced at 9,000 Hours, All Cylinders except Steering Cylinders Replaced at 5,000 Hours ago, Extension Boom and Bucket Replaced Newer Front Window Replaced, New Bucket, Good AC and Heat in Cab.7 New Nokian Tires Replaced the last 4.500 Hours, Boggies, Differential and Planetaries drain clean. Weight - 48,060 lb Length - 35' Height - 12.8' Width - 10.15' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Fairfield, ME
NEF Equipment
855-251-2648
Call

$ 199,500

2013 Deere 3754 With Waratah 625 Processor, Cab has Heat and AC, Frame Hours 14,000, New Long Block with Low Hours Undercarriage is 80%,One Owner, Ready for the Woods. Weight: 101,651 lbs Length: 32 ft 4 in Width: 11 ft 0 in Height: 9 ft 7 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Bloomington, ID
NEF Equipment
855-251-2648
Call

$ 81,900

2007 Deere 703G Feller Buncher, Equipped with a FS 20 Cutter Saw Head, Enclosed Cab with Heat and AC Engine was rebuilt around 3,000 Hours ago, 15,000 Frame Hours Undercarriage is 75%, Hi/ Low Range needs some work Ready for the Woods. Weight: 45,325 lbs Length: 13' 7" Width: 10' 7" Height: 11'2" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Fairfield, ME
NEF Equipment
855-251-2648
Call

$ 68,500

2004 Deere 548G-3 Grapple Skidder, Has Winch, 14,700 Hours, Well Maintained, Tires are 28L x 26, Good Tread, Enclosed Cab with Heat and Air Conditioning, Ready for the Woods. Operating Weight 23,690 lb Overall Length 20.77in Overall Width 9.51ft in Height To Top Of Cab 9.88ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Fairfield, ME
NEF Equipment
855-251-2648
Call

$ 115,000

2006 John Deere 548G3 -12k hours -New glass -Tires have less than 500 hours -Tight and dry -Has a set of good chains -Have a brand-new set will sell for an additional Cost Turn-key Unit!!!!

Josh Digirolamo
828-302-7264
Call

$ 79,900

2007 John Deere 2054 Harvester with Waratah 622B Head, 17,768 hours, Recent pump, Recent sprocket and rails, New Waratah computer, runs great. Weight 69,187 lbs Length 45 ft 0 in Width 11 ft 10 in Height 10 ft 10 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Colorado Springs, CO
NEF Equipment
855-251-2648
Call

$ 135,000

35.5 Tires, Cab w/ AC, Direct Drive Trans, Dual Funct Grapple, ROPS, Stacking Blade, Winch

 SHREVEPORT, LA
Doggett Machinery
225-306-7028
Call

$ 36,500

2005 John Deere 648GIII Duel arch grapple Skidder, 11,170 hrs, minus winch, 30.5 50-70% new 7/8 tryygs on the front, supposed to have a fresh motor 2 years ago, no paperwork. Heat ac and lights work. Length: 23 ft 7 in Width: 10 ft 6 in Height: 9 ft 9 in Weight: 32,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Burlington, VT
NEF Equipment
855-251-2648
Call

$ 8,500

Good condition, no leaks and operated properly when removed. very minor pin wear.

Forestry First
855-588-7871 ext:1
Call

$ 145,000

30.5 Tires, Cab w/ AC, Direct Drive Trans, Dual Funct Grapple, Heavy Duty Axles, Limb Risers, ROPS, Stacking Blade, Winch

 MONROE, LA
Doggett Machinery
225-306-7028
Call

$ 349,000

2018 Deere 859M Feller Buncher, Equipped with Quadco 24B 360 Degree Hot Saw, ONLY 7600 Hours, Enclosed Cab with Heat and Air Conditioning, Undercarriage is 75%, Fire Suppression, NEW Crate Engine Tier 4 9 Liter, New DPF and Sensors, Engine is being replaced due to Low Compression in Cylinder, More Pictures Coming Soon, Ready for the Woods. Length 16.1 ft. Width 10.11 ft. Height 12.10 Weight 79,510 Lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Sacramento, CA
NEF Equipment
855-251-2648
Call

$ 120,000

35.5 Tires, Aux Steering, Cab w/ AC, Dual Funct Grapple, Limb Risers, ROPS, Super Wide HD Axles, Trail Building Blade, Winch

 ALEXANDRIA, LA
Doggett Machinery
225-306-7028
Call

$ 114,000

2019 John Deere 648LII Grapple Skidder, Dual Arch, Winch, 4000 Hours, 28L X 26 Tires

 Elkins, WV
Reckart Equipment Co.
304-614-7939
Call

$ 69,995

Single Arch 6 Sp Torque Drive Winch New Heat/AC 14K Frame Hours Rblt Motor @ 12K New Trans @ 12K New Hyd Pump @ 15K Selling On Like New 24.5 28Ls Also available

 Southern, IL
Carolina Used Machinery
828-773-2204
Call

$ 54,900

2006 JOHN DEERE 748GIII SKIDDER 17,XXX HOURS RECENT TOP END DONE ON ENGINE GOOD TIRES WELL MAINTAINED FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

 Dover, NH
Granite Heavy Equipment and Finance
603-953-5983
Call

$ 70,000

2013 DEERE 843K Wheel Feller Buncher Hours- 6,625 Serial Number- 1DW843KXCDC654496 FD22 Head available for an additional cost

Vernon Novak
828-773-6456
Call

Call for Price

John Deere 648GIII cab and contents available separately. Excellent doors with glass.

 Rocky Mount, VA
Mechanized Solutions LLC
304-494-4830
Call

$ 140,000

Delimber, Slasher/Swing Boom

 MONROE, LA
Doggett Machinery
225-306-7028
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved