Timbco For Sale

MLS Number 11788922 2016 Tigercat 635E Bogey Skidder 10,073 Hours One Owner Machine 35.5 Tires at 85% on Front 30.5 Tires at 80% on Rear Inside 24.5 Tires at 70% on Rear Outside Fiat/Tigercat Tier IV engine No DEF Dealer Inspected Very Good Running condition

2014 Tigercat 635E, 15,805 hrs., 15k frame hrs., 500 hrs. on rear and front chuck, engine 8k hrs. ago, all pins and the back half were re-done 500 hrs. ago, center has a slight bump in it, cold air, light works, no codes, reversing fan unhooked it 100 hrs. ago, small leak up front, $125,000 (Price includes the 500 hour tracks that are on it, For 10k less, I have a 60% set that can go with it instead)

6k hours on engine, Dual Arch, Bogie, extended range fuel tank, 35.5 and 44’s

2016 Tigercat 635E -14,950 hours -No Blow by -Tight and dry -Chains with tracks

MLS Number 11489109 2017 Tigercat 635G Skidder 8335 hours New Front + Rear Diffs within last year New Turbo New Rear Tracks

LS Number 11563027 2017 Tigercat 635G Bogey Skidder 6493 hours

Timbco/Valmet 445 track group, optionally low hours chains, reused pads that are in very good condition. 8 1/2 inch pitch 45 links.

Available for parts. Mid 90s Timbco 445B. Good finals, drive motor, pumps, swing motor, undercarriage and more. Please let us know what parts you need. Shipping available.

2000 Timbco 445D Feller Buncher, Cummins 8.3 Diesel Engine, Hours Unknown, Has 43" Bar Saw with 3/4" Pitch, Heavy Duty Cat D-7 Undercarriage is 70-75%, Enclosed Cab with Heat and Air Conditioning, Repleaced 3 Pumps (New), New Control Valve, $15,000.00 in 6000psi New Hoses installed, Ready for the Woods. Weight 65,000 lbs Length 35 ft 6 in Width 11 ft 2 in Height 12 ft 0 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Timbco 445D. The last of the mechanical machines. 8.3 Cummins, Rexroth pumps, Rexroth valve, in the woods operating today. Equipped with lateral tilt bar saw.

Timbco 33" Bar Saw, Like New with a Heavy Duty Waratah 360 Rotate

28” single grouser pads for 445 Timbco or 735 Timber Pro. $40 each

Timbco 415 lower car body, very low hours, excellent tracks, GFT 50 finals, drive motors.

2006 Timbco 415 Processor, Logmax 7000 Processor Head, Machine Isuzu Engine and has 6000 Hours3.5 Gallons/per hour, Undercarriage is 50%, Enclosed Cab with Heat and Air Conditioning, Ready for the Woods. Operating Weight 96,672.8 lbs Height - Top of Cab 10.7 ft Shipping Length - non tilt 13.5 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Special pricing on Lohmann GFT 50 Final Drives for 415 Timbco/Valmet

2001 Timbco 415D Processor with Rolly, hours unknown, Undercarriage @ 80%, $54,990 Trades Welcome

Location: ALLENWOOD, PA

2002 Timbco 425 Feller Buncher, Equipped with a Quadco 20" Fixed Head, Leveling Cab, Enclosed Cab with Heat and Air Conditioning, New Final Drives, UC is 80-85%, Cummins 8.3 Diesel with 11000 Hours, New Windshield, Ready for the Woods. Weight 55,235 lbs Height 12 ft 2 in Width 9 ft 8 in Length 21 ft 4 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Timbco 425, good undercarriage, both finals replaced, pumps and 8.3 Cummins rebuilt, will have some new lexan and a 360 rotation bar saw. $95,000

Timbco 425 bottom rollers, have single flange and double flange, (75) available