Equipment For Sale

2018 Doosan DL220-5 Wheel Loader, In Stock Ready to go, JRB Hydraulic Quick Coupler and 3 Yard Bucket.

2017 Doosan DL250 Wheel Loader, 650 hours with scales. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 Doosan DL250-5, Hydraulic Coupler, Aux Hyd, Bucket. Clean Machine.

New Doosan DL280 Wheel Loader, Hydraulic Coupler, Bucket. Call today for pricing.

2020 Doosan DL280-5 Wheel Loader, JRB Quick Coupler, Bucket. Clean Low Hour Wheel Loader.

DOOSAN portable lighting with only .2 hours.

2018 Dorsey Trailer, Good tires, maintained well, located in Tazewell, VA Contact Zach for more information. Ready to hit the road. 931-224-0699

Aluminum Open Top Live Floor, 48x102, Air Ride Sliding Tandem, Aluminum Rear Barn Style Doors, 22.5 Tires, Shurco Lock and Roll Tarp, Hallco 4000 Series Floor with 3/16 Slats, Extruded Aluminum Top and Bottom Rail, Side Post on 12" Center Settings, 12" Crossmembers, Aluminum Prepainted White Sides, Front Ladders Air Ride 45x102 $69,900 Spring Ride $69,900 Prices are plus FET LMI is your go to source for semi-truck trailers located in Waverly, Tennessee! We have been family owned and operated since 1980. We are North America’s largest stocking dealer of lowboy trailers. We are proud to be ranked #1 in New Trailer Sales for Pitts Trailers since 2009, Dorsey’s Top Dealer since 2015, Jet’s largest detach dealer, and Landoll’s Top 3 Dealer since 2019. Our inventory also includes new and used forestry, scrap, and material handling equipment and trailers, and we’re proud to be an authorized dealer for Barko, Robotec, CSI, and Demco. We also carry parts for the equipment lines we carry. Give us a call today and we will get your parts shipped out quickly. Need your purchase moved? We have a network of over the road trucks to get your trailer to you ASAP! Need your purchase financed? We offer financing options to fit your needs. We accept and welcome used trade-in trailers, as well as purchase used trailers. Our location stocks and install on-demand the following: toolboxes, ramp kits, chains, binders, straps, bungees, bulkheads, headache racks, tarps, sliding tarp systems, aluminum wheels, new and used tires, everything you would need for your flatbed, drop deck or lowboy. Check out our inventory online. If you don’t find what you’re looking for, contact us and we’ll help you track it down. We look forward to serving you!

Aluminum Open Top, Spring Suspension, Aluminum Top Hinge Door, Aluminum Floor, 22.5 Tires Shurco Lock and Roll Tarp, Extruded Aluminum Top and Bottom Rail, Side Post on 16" Center Settings, Aluminum Prepainted White Sides, Front Ladder Same trailer with Slide tarp $41,900 Same trailer with Live Floor $69,900 Prices are plus FET LMI is your go to source for semi-truck trailers located in Waverly, Tennessee! We have been family owned and operated since 1980. We are North America’s largest stocking dealer of lowboy trailers. We are proud to be ranked #1 in New Trailer Sales for Pitts Trailers since 2009, Dorsey’s Top Dealer since 2015, Jet’s largest detach dealer, and Landoll’s Top 3 Dealer since 2019. Our inventory also includes new and used forestry, scrap, and material handling equipment and trailers, and we’re proud to be an authorized dealer for Barko, Robotec, CSI, and Demco. We also carry parts for the equipment lines we carry. Give us a call today and we will get your parts shipped out quickly. Need your purchase moved? We have a network of over the road trucks to get your trailer to you ASAP! Need your purchase financed? We offer financing options to fit your needs. We accept and welcome used trade-in trailers, as well as purchase used trailers. Our location stocks and install on-demand the following: toolboxes, ramp kits, chains, binders, straps, bungees, bulkheads, headache racks, tarps, sliding tarp systems, aluminum wheels, new and used tires, everything you would need for your flatbed, drop deck or lowboy. Check out our inventory online. If you don’t find what you’re looking for, contact us and we’ll help you track it down. We look forward to serving you!

2013 Dorsey 45’ walking floor chip van trailer. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1991 Dorsey open top walking floor trailer; swinging doors; spring ride; serial number 1DTV75W22MA200926

- 16.5' long - 16 rotating arms and a total of 288 - 32" clamps

DOUCET - 16-SECTION: Clamp Carrier (Hydraulic)Specifications -- (16) Sections; 8-1/2' width. -- (6) Clamps per section; (86) clamps total. -- 32" Clamp opening (rapid change) with: 2-1/2" High jaws.Complete with: -- 5 HP Hydraulic power pack and motor for rotation. -- Hydraulic clamp tightening. -- Pneumatic overhead panel flattener.NOTE: Tear down included!

DOUCET 12-SECTION Clamp Carrier (Hydraulic)Specifications: -- (12) Sections, 8-1/2' width, -- (9) Clamps per section (108) clamps total, -- 36" Clamp opening (rapid change) with 2-1/2" high jaws.Complete with: -- 5 HP hydraulic power pack and motor for rotation -- Hydraulic clamp tightening; -- Pneumatic overhead panel flattener.Note: Tear down not included

DOUCET BT3-30-5-23-G-PT Return Conveyor for EdgebandersSpecifications: -- Right-hand feed, with Left-hand return. -- Min. part size 4" x 12". -- Max. panel size (with operator assistance supporting then turning panels) 45" x 96".Equipped with: -- 1-1/2’ L Infeed roller conveyor section, with (5) 23-1/4"; W & (2) 34-1/4"; W Rollers. -- 34-1/4"; W x 5-1/2’ L x 35"; H Receiving table, with Automatic/Manual height adjustment 2". -- (8) 3/8"; Dia. transfer belts, (3) on 3"; Centers, (2) on 6"; Centers, & (3) on 9"; Centers. -- 29-1/2"; W x 5-1/2’ L x 34"; H Return table. -- 29-1/2"; W x 18’ L x 34"; H 3-Section Return conveyor, with 5-1/2"; W x 6’ L Gravity roller conveyor side extension. -- All rollers 1-7/8"; Dia. covered line shaft on 3"; centers.

DOUCET ERS-96/RS-75/AP-508 MULTI-BLADE PANEL GROOVE/RIP SAW SYSTEM:The Doucet ERS-96/RS-75 Automated Panel GROOVE/RIP Saw System is designed to GROOVE and/or RIP panels as well as edge the sides of core materials. Ideal for plywood, OSB, MDF, HDF and other composite panels.This Line was originally designed for Engineered Flooring Blanks.ERS-96 Grooving Specifications:40 HP - 3,500 RPM belt driven saw arbor motor. Material width cap. 96" maximum. Material thickness 0.5" - 0.625" maximumGrooving pattern on 4" centers across the 96" width of panel. Depth and width of groove approx. 3/16" kerf/width by 1/8" deep.3" dia. Arbor shaft with 1.5 HP motor for motorized arbor adjustment for panel thickness. Saw arbor accessible from above for tool changes. -- Feed system:5 HP - 1,750 RPM feed motor, variable feed speed up to 75 FPM.(4) Powered bottom feed rollers & adjustable top idler pressure rolls with positive panel support during grooving operations.Top & bottom feed rollers have slip resistant urethane covered rollers, feed rollers are chain driven with air tensioning. -- Complete with:Dynamic saw arbor brake; Infeed anti-kickback fingers; Saw blade safety interlock cover; 12" dia. dust collection outlet (4,000 CFM required). RS-75 Ripping Specifications:40 HP - 3,500 RPM belt driven saw arbor motor. Material width cap. 60" maximum. Strip width cap. 2.5" minimum. Depth of cut 0.25" - 0.75" (6 - 19 mm) maximum.3" dia. Arbor shaft with 1.5 HP motor for motorized arbor adjustment for panel thickness. Saw arbor accessible from above for tool changes. -- Feed system:Doucet AP-508 Automatic panel feeder with scissor lift to automatically feed panels as needed.5 HP - 1,750 RPM feed motor, variable feed speed up to 75 FPM.(4) Powered bottom feed rollers & adjustable top idler pressure rolls with positive panel support during grooving operations.Top & bottom feed rollers have slip resistant urethane covered rollers, feed rollers are chain driven with air tensioning. -- Operator Interface: Doucet OI/HMI Control System for automatic loading & stacking with minimal human intervention other than a forklift operator to bring in new material and remove the processed parts/strips. -- Complete with:Dynamic saw arbor brake; Infeed anti-kickback fingers; Saw blade safety interlock cover; 12" dia. dust collection outlet (4,000 CFM required). -- Options Include: (1) Doucet AP-508 Automatic panel feeder with Indexing scissor lift. (1) Cross Transfer Chain Conveyor to feed panels sideways by the long edge through the Groover, max width 96". (1) Cross Transfer Chain Conveyor to feed panels short end wise through the panel RIPSAW, max. width 60" (1) Outfeed Lift Table to automatically stack ripped strips. Maximum weight of stack: approx. 5,000 LBS. -- Actual Model is DOUCET RS-75/ERS-96/AP-508

2001 Doucet EM2 End Matcher

DOUCET FX 150 Automatic Feed to Finger JointerModel "MT-10-GD" automatic feed to Finger Jointer, chain feeding system driven on the bottom and right-and-left sides, feeds boards up to 6" max. width. -- Model "FX-150" right-hand Shaper section: Cap. 3/4" - 2" max. thickness, 1-1/2" - 8" max. width (with lugs on 12" centers, 6" max. width on 9" centers), 5" min. - 96" max. length. -- Equipped with: 5 HP Trim saw, 15 HP Shaper motor, PLC controls on shaper section, dual feed chain with lugs on 12" centers, 45 FPM fixed feed speed, 5 HP feed drive, PLC controlled extrusion type glue applicator with 12-gal. tank, sound enclosure and cabinet type base. Transfer to the assembly press. -- Includes: Stainless friction plates on assembly table, board holddown on all (4) sides, sound enclosure, cabinet type base and all protective hoods, (1) 8-bolt cutterhead with knives and setup stand. -- Approx. 8,000 linear ft./shift or more based on 12" average infeed length.This unit has no control panel

Good Condition 3 phase .5 HP motor

Doucet MSP-CR-19-48-15-TRF-C-8-7 Conveyor