Tigercat For Sale

2014 Tigercat 635E, 15,805 hrs., 15k frame hrs., 500 hrs. on rear and front chuck, engine 8k hrs. ago, all pins and the back half were re-done 500 hrs. ago, center has a slight bump in it, cold air, light works, no codes, reversing fan unhooked it 100 hrs. ago, small leak up front, $125,000 (Price includes the 500 hour tracks that are on it, For 10k less, I have a 60% set that can go with it instead)

2009 Tigercat 822C Processor with 24,000 hours. Includes a Logmax 7000 Processor Head, Machine Runs Stong, Undercarriage 60%, Version 5 Computer, Engine was rebuilt at one time, Heat and Air Conditioning in Cab Ready for the Woods. Operating Weight W/O Attachment 54,000 lb Overall Length 14.59ft in Overall Width 10.93ft in Height To Top Of Cab 10.93ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Tigercat 822 Feller Buncher, Equipped with a Koehring 24" Hot Saw with 90 Degrees, Enclosed Cab with Heat and Air Conditioning, Engine is a Cummins 8.3 Diesel with 6,900 Hours, Undercarriage is 90%, Ready for the Woods. Length 13 ft 11 in Width 10 ft 0 in Height 11 ft 0 in Weight 52,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2022 Tigercat X822E -2,755 hours -Tigercat 5702 sawhead -HID lights -Webastos engine and hydraulics heater -FH400 undercarriage with 24" pads -Remainder of 3 years or 6,000hrs powertrain and hydraulics warranty which ends Aug,8th 2025 -$4,000 worth of spare hoses -Spare saw teeth and bolts -Oil filters -Machine is in like new condition

1993 Timbco 425 with Rolly-II Processor Head, 37" Bar Saw, New Air Bag in Head, Cummins 8.3 Diesel , Hours reading 6,769, Leveling Cab, Enclosed Cab with Heat and AC, Propac Heater, New Computer Sensor for Measurements ,No Oil Leaks or Engine Blow By , Final Drives Done Recently. Ready for the Woods... Weight 55,235 lbs Length 21 ft 4 in Width 9 ft 8 in Height 12 ft 2 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Timbco 415 Processor, Logmax 7000 Processor Head, Machine Isuzu Engine and has 6000 Hours3.5 Gallons/per hour, Undercarriage is 50%, Enclosed Cab with Heat and Air Conditioning, Ready for the Woods. Operating Weight 96,672.8 lbs Height - Top of Cab 10.7 ft Shipping Length - non tilt 13.5 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1994 Timbco 425B Processor, Machine has Log Max 5000 Head, 15,000 Hours, Undercarriage is 50%, 404 Chain Pitch, Enclosed Cab with Heat Weight 55,235 lbs Length 21 ft 4 in Width 9 ft 8 in Height 12 ft 2 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2002 Timbco 425 Feller Buncher, Equipped with a Quadco 20" Fixed Head, Leveling Cab, Enclosed Cab with Heat and Air Conditioning, New Final Drives, UC is 80-85%, Cummins 8.3 Diesel with 11000 Hours, New Windshield, Ready for the Woods. Weight 55,235 lbs Height 12 ft 2 in Width 9 ft 8 in Length 21 ft 4 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Timbco 425D with squirt boom and Waratah 620 processor. Will sell head separately

1997 Timbco 425C Equipped with a CTR Dangle Head Saw with 24" Bar Saw, Rebuilt Engine with 3000 Hours, Undercarriage is 40-45%. Tracks are Good, New Drive Rollers, Enclosed Cab with Heat and AC, Ready for the Woods. Weight 55,235 lbs Length 21'4" Width 9'8" Height 12'2" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2003 Timbco 425D with Logmax 7000 Processor Head, Enclosed Cab with Heat, Air is starting to go, Cummins 8.3 Engine, Unknown Hours, Undercarriage is around 75% Ready to Work. Length: 21 ft 4 in Width: 9 ft 8 in Height: 12 ft 2 in Weight: 55,235 lbs.

Low hour Tracks for 425 Timbco or 725 Timberpro, 28” Pads

2004 Timbco 425EX -19000 frame hours -22c Quadco 40 degree tilt head -8.3 cummins -D6 undercarriage -Heat/ac -New Bluetooth radio -Clean-fix reversing fan -Brand new track chains, drive sprockets, track hardware, track tensioner w/spring -Could use some tlc

2000 Timbco 445D Feller Buncher, Cummins 8.3 Diesel Engine, Hours Unknown, Has 43" Bar Saw with 3/4" Pitch, Heavy Duty Cat D-7 Undercarriage is 70-75%, Enclosed Cab with Heat and Air Conditioning, Repleaced 3 Pumps (New), New Control Valve, $15,000.00 in 6000psi New Hoses installed, Ready for the Woods. Weight 65,000 lbs Length 35 ft 6 in Width 11 ft 2 in Height 12 ft 0 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Timbco 425 Tracks Also a Set for a Komatsu 445FXL-2 Available

1993 Timbco 425D -4xxx on meter -Engine been rebuilt -Just replaced both track rails and sprockets have less that 10 hours on them -Idlers and rollers are in good shape -Everything works -Ac/heat -Radio -33” Timbco bar saw head -40 degree tilt -Cameras on the head and behind cab -All bushings are tight Ready to work very well maintained

2006 Timbco 425EXL with Logmax 7000 Processor Head, Hours are 8,000.00 Rebuilt Computer Measuring Device, Enclosed Cab with Heat and Air Conditioning, Undercarriage is 85% No Leaks, Tight Machine. Operating Weight 54,002 lbs Height - Top of Cab 12.4 ft Shipping Length - non tilt 14.6 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Timbco 425 EXL Feller Buncher Equipped with A Quadco 22" 360 Degree Saw Head, NEW Cummins Engine Installed, Under Factory Warranty, 7000 Frame Hours Undercarriage 80% Enclosed Cab with Heat and Air... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Timbco 445EXL Feller Buncher, Equipped with a Quadco 22" 360 Wrist Saw, Enclosed Cab with Heat and Air Conditioning, Leveling Cab, Good Undercarriage 70%, Ready for the Woods Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.