Tigercat For Sale

2013 Tigercat 620D

2018 Tigercat 630e -5897 hours -Well Maintained -Def System Replaced by Titan at 4900 Hours -Tires - 30% -Working Daily

2016 Tigercat 870D Feller BuncherLeveling Cab, NO DEF, 2500 Hours on NEW UNDERCARRIAGE, 1000 Hours on Rebuilt Saw Head and Leveling Cylinder, Encosed Cab with Heat and AC, Tigercat Saw Head. Operating Weight W/O Attachment 66,870 lb Overall Length 18.18ft in Overall Width 10.83ft in Height To Top Of Cab 10.83ft in Ground Clearance 2.33 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2015 Tigercat 620E Grapple Skidder, 10.000 Frame Hours on Machine, Enclosed Cab with Heat and Air Conditioning, Center Section is Tight , Tires are 30.5 x32 Machine is Ready for the Woods. Weight 37,750 lbs Length 27ft Width 12 ft Height 10ft 4in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Tigercat 234B Log Loader, Includes a CSI 264 Ultra Delimber . Engine has 10,000 Original Hours, Optional Tigercat Slasher Saw Available also, Enclosed Cab with Heat and Air Conditioning Mounted on Kodiak Trailer Ready for the Woods Operating Weight 32,750 lb Shipping Length 31.99ft in Max Height 24.94ft in Width 8.5ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Tigercat 635E, 15,805 hrs., 15k frame hrs., 500 hrs. on rear and front chuck, engine 8k hrs. ago, all pins and the back half were re-done 500 hrs. ago, center has a slight bump in it, cold air, light works, no codes, reversing fan unhooked it 100 hrs. ago, small leak up front, $125,000 (Price includes the 500 hour tracks that are on it, For 10k less, I have a 60% set that can go with it instead)

2009 Tigercat 822C Processor with 24,000 hours. Includes a Logmax 7000 Processor Head, Machine Runs Stong, Undercarriage 60%, Version 5 Computer, Engine was rebuilt at one time, Heat and Air Conditioning in Cab Ready for the Woods. Operating Weight W/O Attachment 54,000 lb Overall Length 14.59ft in Overall Width 10.93ft in Height To Top Of Cab 10.93ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Tigercat 822 Feller Buncher, Equipped with a Koehring 24" Hot Saw with 90 Degrees, Enclosed Cab with Heat and Air Conditioning, Engine is a Cummins 8.3 Diesel with 6,900 Hours, Undercarriage is 90%, Ready for the Woods. Length 13 ft 11 in Width 10 ft 0 in Height 11 ft 0 in Weight 52,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2022 Tigercat X822E -2,755 hours -Tigercat 5702 sawhead -HID lights -Webastos engine and hydraulics heater -FH400 undercarriage with 24" pads -Remainder of 3 years or 6,000hrs powertrain and hydraulics warranty which ends Aug,8th 2025 -$4,000 worth of spare hoses -Spare saw teeth and bolts -Oil filters -Machine is in like new condition

2018 Tigercat 720G Feller Buncher with 6900 hours, Tight and Dry Machine, Disk 75%, Tires 75%, New packings in cylinders, One owner. Weight 34,250 lbs Length 24 ft 0 in Width 8 ft 4 in Height 11 ft 0 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Tigercat 610C -17864 frame hours -Previous owner did engine -40,000lb winch -Very tight machine -Tires 85% percent -Has a new front axle replaced in Feb 2024

1999 Tigercat 630B -14000 frame hours -4200 on 8.3l Cummins -New fuel filter -Greased -Two boom cylinders will be needed re-repacked -Top center pin is a little bit loose but almost don’t notice yet Functional woods ready skidder

TC 5702 Sawhead, 110-degree wrist. 36” tri trac New teeth, serviced and dried up.

2018 TigerCat H855D -8800+ hours -Waratah 624c head -Tight and dry -Uc in great shape Ready to work

2007 Tigercat 720E, runs good but does need a saw disk. We plan to put a disk on it. So it'll be ready for the woods when purchased. Located on our yard at 437 Saint Peter Street State Line MS 39362 For more information you can call Gavin 601/394/7796 Call or text - Tim 251/366/3237 Kameron-251/242/5493 ALL SALES ON USED EQUIPMENT ARE CASH, CASHIERS CHECK OR BANK TRANSFER.

2021 Tigercat 630H -6047 hours -Brand new rear end -Still working in woods -Can provide service records -35.5 tires 2 Brand new tires on the rear -Blows cold air -DEF deleted

TC ST5702 FELLING SAW S/N 57T0349, TELEMATICS, 340 DEG HI TQ HI ROT WRIST AND BOOM

This 720E Tigercat is in good condition it has 28L-26 tires with dually plates. We will be willing to sell the cutter head off it for $15,000 separate. Or if you want a smaller head for this machine we will swap out the head for a smaller one free of charge. This cutter is located at 467 St Peter St, State Line, Mississippi If interested in more details call Gavin 601-394-7796 Tim 251-366-3237 Kameron 251-242-5493

2018 Tigercat 1185, 4353 hrs., TC FPT N67 Tier 4F Engine, rated at (230 KW) 308hp, Tigercat Extreme Duty pump drive, trans., and hydraulically balanced bogie axles, $395,000

36" Triple grouser pads, low hours for age, well cared for. engine rebuilt at 10k hours