Equipment For Sale

75" Precision 6 Knife Chipper S/N C-1732

Precision 58" Chipper 3 Knife w/100HP Motor

Horizontal feed, fan discharge, 6-knife

Precision Chip Screen 6'x6', 1-3/4" screen, s/n S1729

Precision 3-knife Chipper with new knife holders, Model 48-11, S/N C-3132

Precision 5x5 Shaker Screen s/n 5-2259, No drive, includes elbow on top

Complete chip plant includes: - The infeed is 12’ above ground level. They were feeding it one log at a time with a shovel. - There is a single chain 12” wide leading to the debarker. - The debarker is a Salem 20” ring debarker with mcdiarmond controls. - From the debarker it goes through I think is a metal detector. It’s is enclosed, 8’ long with a belt conveyor. - 75’ of 3-strand chain that reduces to 2-strand chain for 35’ then goes to another 2-strand chain for 12’ then goes into the chipper. - The chipper is a Precision with 2- 400 hp high efficiency 3 phase motors. - From the chipper the chips drop onto a 42”x50’ inclined belt that leads to the 2 deck screen. The screen is 92”x20’ - The waste goes on a 9”x20’ incline belt and dropped into a truck. - The chips go out on a 3-strand 100’ conveyor (strands are 14” wide) to a radial stacker for loading trucks. The stacker belt is 42”x65’ - Chips can be redirected to blower unit system that will transport them to a rail siding to so they can be loaded into a rail area. It starts out with 75’ of 12” pipe running on the ground. Then it sweeps straight up to a height of about 24’ and goes 150’ to a siding across the county road. The chip loading facility is intact. - The hog is located back by where the logs are loaded onto the chain going to debarker. Here’s a list of the conveyors going back to the Kockums hog. It has a 24”x36” opening at the top. - Conveyors: 12”x100’, 12”x 25’, 12”x60’. All of these conveyors are 1 strand steel.

Precision Rosserhead Log Debarker with 60hp motor on head and 15hp electric/hydraulic power unit with 30' carriage

Precision 5'x5' Shaker Screen

Precision 6' x 6' screen, hyd drive, good working condition

6 knife, top discharge with heavy-duty base and Gen 3 throat.

Precision Kwik Chip Unit consisting of a 58" 6 knife chipper with a 150 HP electric motor, 7x7 Precision chip screen with U-joint type hangers, pipe, cyclone, and chip blower.

1996 model Precision 96" chipper, horizontal feed, bottom discharge, left-hand with 8" thick, 5-knife disk. Includes 2 each 500 HP, 460 volt, 1200 rpm motors, one WEG 500 HP soft start, one AB 500 HP soft start, one GE Panel with 2 each 800 amp disconnect switches, substructure to ground under chipper, pallet of new chipper parts, high volume drag chain 52' long under chipper, 48" wide x 55' long concave belt.

6-knife, top discharge.

Refurbished 48" Precision Husky 3 Knife Horiz Feed Chipper- price is w/ exchange- in STOCK

Precision 7 x 7 Chip Screen S/N S-225

Precision 58" 6 Knife Chipper S/N C4173 with Precision 6 X 6 Screen. Never Has Seen Wood

Precision 5' x 5' shaker screen, 1-3/4" top screen, 3/4" bottom screen, includes cyclone and dual chip-loading system, hyd. drive on chip blower & shaker screen, good working condition

Precision Husky 48” Horizontal Feed, Bottom Discharge, 6-Knife Wastewood Chipper. Case and disc are in very good condition with almost no wear in knife slots. Includes V-belt drive pulley. Spout is 18” X 24” and will handle 24” slab or 11” round wood. Machine weights 5,136 lbs. Shipping size 4ft. 6” wide x 5ft. 4” long x 5ft. high sitting on 4” high blocks. Inventory No. 12319. Price, FOB Portland, OR -------------------------------------------------$12,500.

One (1) Used 1991 Precision 96” Model 96.27 Horizontal Feed, Side Discharge, 4-Knife Whole Log Chipper with 8" thick disc and disc brake assembly. Serial number is C.2422. 27” maximum log diameter. Chipper has not run heavy production and appears in very good condition. Many spare parts and knives included. Weight is 35,000 lbs. Average production capacity is 125 tons per hour. Inventory No. 10238. Price, FOB Portland, OR --------------------------------$29,500.