Equipment For Sale

MDI 38" x 5' Fiberglass Section with Sensor & Electronics Box CCW65

MDI Metal Detector and control box.

MDI Metal Detector Nolco fiberglass section 6' x 14"

MDI whole log metal detector, capacity is 30" wide x 28" tall, includes controls, very good condition

MDI Mdl CR85 Metal Detector w/Search Coil & Chassis S/N 0909

ME.SA M21 BORING MACHINE21-Spindle boring head on 32 mm centers, drills vertically from bottom up and head rotates to horizontal position for edge boring, head rotation is manual tilting with assistance from a strut. -- 2-3/4" Max. drilling depth, 2 HP - 2,800 RPM motor, pneumatic drill head advance with speed control; head height adjustment with mechanical digital readout; 34" x 20" table size, max. workpiece width 31-1/2". -- Equipped with: Left & right side fences with stops for mirror-image fence setting for right- & left-hand boring, (2) pneumatic holddown clamps, pneumatic foot pedal control, and magnetic starter with overload protection.

ME.SA M21 BORING MACHINE21-Spindle boring head on 32 mm centers, drills vertically from bottom up and head rotates to horizontal position for edge boring, head rotation is manual tilting with assistance from a strut.Specifications: -- 2-3/4" Max. drilling depth, 2 HP - 2,800 RPM motor, pneumatic drill head advance with speed control; head height adjustment with mechanical digital readout; 34" x 20" table size, max. workpiece width 31-1/2". -- Equipped with: Left & right side fences with stops for mirror-image fence setting for right- & left-hand boring, (2) pneumatic holddown clamps, pneumatic foot pedal control, and magnetic starter with overload protection.

Meadows board edger, 4" thick x 36" wide capacity, infeed rollers, outfeed is a tilt table, line-shaft ready, 2 blades-1 is movable, good working condition

Meadows #2 Sawmill w/ 50’ of track / (2) movable saw vertical edger, husk frame, carriage drive, log turner, mill is complete w/ (2) strand infeed log conveyor, green chain, barn sweep under head saw w/ outside incline stacking section, Detroit 450 KW genset, 150 HP head saw w/ all wire and conduit included, Ref #205

Meadows #1 Mill, diesel power w/ Miner 332 edger, gas engine - Miner 332 portable edger – (2) saw, S/N 9700, rated 3” material, mounted on carriage, 4” rip fence, Kohler gas engine 25 HP w/ infeed & outfeed, (1) movable saw, additional saw plates, (4) adjustable legs that fold in, 20’ portable (2) strand log deck, hydraulic motor w/ hoist drive, H-78 chain, under carriage to relocate, Meadows # 1 24” (3) HB carriage, hand set works, hydraulic & electric dogs runs on phase converter w/ triple bearing husk frame, 56” inserted tooth saw, S/N 4MF-1439-94, chain type log turner w/ onboard hydraulics, foot control log dec, hand controls to actuate dogs & log turners, foot, blower under husk frame w/ discharge pipe, cuts 16’,14’ x 16” outfeed belt conveyor, (2) outfeed gravity roll case, axles for mobility w/ 60 Series 6-cylinder w/ PTO sheaves and fuel tank…$45,000 Also available with mill only both or one or the other can sell with mill. MILL MUST SELL FIRST Case 585E Construction King 4 x 4 forklift, S/N 409-05-9019, triple mast w/ rebuilt cylinder, 4,920 original hours…$16,500 International (early 90’s), gas engine w/ Serco 8000, S/N L3001 w/ outriggers w/ PTO & hydraulic motor & reservoir, 2,681 hours, 4BT Cummins engine…$16,500 Ref #207, Contact Ethan Mealer for more information (931) 607-4738

#114 • Meadows Sawmill -- Specifications & Features -- Make: Meadows. Serial #: 3D004-98. Power Type: Electric. Power: yes. Manual: no. # of Headblocks: 4. Modular Mill Type: Hydraulic. Blade Size on Husk: 56”. Overall Dimensions: 53' long. Setworks: yes. Setworks Make: 110/Hyd. Automated: yes. Carriage Dimensions: 15’. Log Deck: no. Log Turner: yes. Dust Blower: no. Edger: no. -- Seller Statement -- 43” c-c of track, climate controlled cab. Computerized controls, tung dog, can’t kickers, chain type turner, includes support steel to ground, Rigging Fee $8,000, Does not include the support steel to the ground.

Meadows 4 headblock carriage, Model; #3 DELUXE, 43" center to center wheels, 110 volt over air solenoids, good working condition

Meadows 5 HP Small Blower with Electric Motor

Meadows 16' 3 Strand Log Deck w/Drive

The Model 120H log turner utilizes two (2) 2 inch by 12 inch hydraulic cylinders with 1 1/2 inch bores to lift its head. The log turner chain comes standard with 13 teeth that are 1 inch wide. The head is chain driven by a Char-lyn 104-1253 hydraulic motor (included). The drive includes a 13 teeth and 25 teeth sprocket and number 80 chain with chain guard included. Controls, not included, with hoses sell for $2,490.00. 20 GPM Hydraulic power sources, not included, sell for $7,320.00. All prices are FOB North Wilkesboro, NC 28659. For questions please send an email to [email protected] or call 1-800-626-2282, ask to speak with Brian Hege. To place an order please call 1-800-626-2282, ask to speak with Brian Hege.

Meadows Chain Turner

6" X 54" MEADOWS "TITAN" Combination gang-edger with 100HP drive motor, 5 saws on gang side and 18" edger side movement. Door on right. Laser movement. 48" roll width infeed and push button controls. 20 HP hydraulic system. Outfeed belt, 14' long. Very good condition. Price:  $45,000.00

Meadows Circular Sawmill 1 million + board feet per year 56" blade with new bits and shanks New factory built saw arbor and bearings from Meadows New factory built live feed conveyor Computer setworks 225 hp Detroit Some hydraulic hoses and wiring could be replaced Was making crossties

Meadows Mills 6” Spartan Gang/Edger

Meadows LH 3 Knee Circle Saw Mill 3 Head Block, Carriage. Track. Cab & Controls 52" Blade With Electric Motors. Believe it is a #2