Select For Sale

2018 Quincy Air Compressor 230V 1ph 60Hz

QUINCY - QMT15 ACA, ...Air Compressor (Rotary Screw) w/DryerSpecifications: -- 15 HP - 54.9 CFM @ 125 PSIG; 120-Gallon tank mounted with Refrigerated Dryer & Filters. Equipped with: -- 15 HP TEFC Motor; air-cooled aftercooler; high efficiency inlet filter; upward package air discharge; vibration isolation; Wye-Delta start. -- 54.9 CFM @ 125 PSIG; 69 dBA; 120-gal horizontal tank; refrigerated air dryer.Total operating hours: (29,407).Specifications subject to verification

Quincy QSI-500 100hp Screw Compressor S/N 917823 36,264 Hrs

QSI-500 100hp Screw Compressor S/N 95571 33,495 Hrs

QUINCY QSVB-25ANN2C Vacuum Pump:25 HP "QSVB Series", 371 CFM, 29.9"HgV rotary screw vacuum, positive lubrication fluid pump; 3″ inlet and 2″ exhaust port.. -- Equipped with:Modulating inlet valve, temperature regulating valve, and high discharge temperature shutdown system with manual reset. -- Complete with:Control panel, electrical enclosure, gauges, exhaust separation system, spin-on fluid filter, and magnetic motor starter. NOTE: The pump only has 969.2 total hours on the meter

QUINCY QSVB-25ANN2F Vacuum Pump:25 HP "QSVB Series", 371 CFM, 29.9"HgV rotary screw vacuum, positive lubrication fluid pump; 3″ inlet and 2″ exhaust port.. -- Equipped with:Modulating inlet valve, temperature regulating valve, and high discharge temperature shutdown system with manual reset. -- Complete with:Control panel, electrical enclosure, gauges, exhaust separation system, spin-on fluid filter, and (2) magnetic motor starter kits as pictured. NOTE: The pump only has 6,935 total hours on the meter!

50HP Quincy air Compressor Rotary Screw Air

TWO (2)150 HP QUINCY ROTARY SCREW AIR COMPRESSORS MODEL # 740B S/N: 800170; AND MODEL # 650H S/N: 73861. Service center tested and ready to go.

Quincy screw compressor, Model; QSI245ANA31A, Serial #; 94877, 50 hp electric power, 69,848 hrs, good working condition

Quincy 75HP Screw Compressor Serial# 940351

Quincy Air Compressor

QUINDAO YICH - YICH-BC600, ...Automatic Feed Through Moulding Sprayer w/Drying Tunnel & 18" width cap. Machine setup: (2) C.A. TECHNOLOGIES AUTOCAT HVLP" low pressure Spray Guns and (1) GRACO "D54311" twin-diaphragm pump. This machine has only sprayed water for testing its operation and never used finishing spray materials.Conveyor belt: PU Abrasion resistant and chemically resistant material; conveyor driven by an electric motor and gear reduction box; overall construction: Cold roll steel plates, bent & joined for stable construction.Sprayer with: (3) Chambers are closely spaced and removable for cleaning; Guns are adjustable in height & angles to set the best angle for coverage; parts are guided into the machine by left/right roller guides. Specifications: -- Max. workpiece width: 600 mm (24") -- Min./max. part thickness: 10 - 120 mm (1/2" - 4-3/4") -- Min. part length: 600 mm (24") -- Feed speed: Adjustable, 15 - 100 FPM -- Number of spray guns: (6) -- Overall Dimensions - 3500 mm x 2100 mm x 2560 mm -- Weight 1000 kG (2,200 Lbs .. need to confirm)Electric powered IR oven with circulating airOven is a variable speed and variable temperature using a roller type conveyor. Current owner has used the oven at 200FOven Specifications: Min/Max part width ½" – 15 ½" Min/Max part thickness ½" – 5" Variable feed speed up to 50 FPM (14 MPM) Feed motor power 1.5 kW Fan power 1.1 kW Heating Power 10.8 kW Overall size 32’ × 38" x 67" H

For a tractor 2 point hitch 45 HP up to 90 HP. Hydraulic Stump grinder

Electric 520 STOP THE RESPLIT CUT WITH A KNIFE NOT A WEDGE PERFECT PIECES EVERY TIME Cuts up to 20 Saw blade with changeable teeth Extended Infeed Deck 25 Ft Disc Screener attached 25 Ft Radial Stacker Saw Dust Collecter Waste conveyor for cutoffs Waste conveyor under the disc screener Auto Splitt mode Can be customized

Brand New Xylog 600 with a crane that goes 26Ft out. It has an infeed deck, and has a disc screener attached to the outfeed conveyor. Cuts up to a 23 inch log It has a multiple position wedge 2, 4, 8 or 16 splits. It auto adjust to maximize your wood size. The wedge moves up and down on its own.

The XYLOFLAM 200/250 is a machine for producing kindling sticks in nets of 5,26 or 10,56 GB. The machine accepts all types of wood. • Designed for scantling, cracked or round timber of all species (soft or hard wood). • Max. wood length 8’’ and max. diameter 10’’. • Feeder platform in sturdy steel with an adjustable hydraulic progress. • Splitting wedge with 5 Tons power. • 2 types of wood bagging : in bulk with rotative bags unit (4 bags max.) or piled up bagging. • Possibility of using bags of 5,26 or 10,56 GB. • Maximum output (depending on log cross-section): 2.4 m³/h, i.e. 120 x 20-litre bags per hour or 60 x 40-litre bags per hour. - In the EM version : output is divided by 30 %. - In the INDUS version : output multiplied by 30 %

Brand New 3 phase Electric. Cuts up to 31.5 inch log. Makes the perfect piece every time. Large operator cab. Auto split system.

Different rectangular jigs to better fit the pallet: 80x120 cm, 100x120 cm, 120x120 cm. Industrial machine with hydraulic vibrating system for a better positioning of the log to gain a steady shape for palletising and for a better filling optimisation - a RABAUD exclusivity. Stretch and watertight plastic film (for dry wood) or net (green wood) Reel support with adjustable net tension system through a restrained roller. Hydraulic lifting system of the drum. Maximum height: 1.85 m (including the pallet)). Machine managed by a module. The operator can access the parameters to modify the net tension, number of turns and the timing of drum lifting. Possibility to wrap down with the drum placed in high position. Radiocontrolled machine. Hydraulic unit with three-phased electric engine (7.5 kw).

Brand new Hydraulic Disc Screener in stock. This is perfect to clean all your firewood after your conveyor. 6.5 feet long