Equipment For Sale

100 HP 230/460 volt 20” x 19” inlet 9” x 28” outlet no hopper

Williams Pulverizer 19"x20" w/50hp motor

2015 Wilson Pacesetter Trailer Hopper bottom Was used for grain PRICE REDUCED

2006 Wilson Pacesetter Trailer Hopper bottom Was used for grain PRICE REDUCED

WILTON 4421-2 20" Pedestal-Type Disc SanderSpecifications: -- Table size 10-1/2" x 27-1/2", Table tilt 45° Out/30° In, Table can be lowered below disc to accommodate large workpieces.Equipped with: -- 3 HP 1,720 RPM Direct drive motor, Low voltage protection switch. -- Positive lock rack & gear table tilt.

WILTON 4421-2 DISC SANDER ---Price Negotiable---Make an Offer!--- Heavy Duty for Wood, Metal, Fiberglass, or Plastic! - Pedestal-Type Disc Sander - Table size 10-1/2" x 27-1/2", Table tilt 45° Out/30° In, Table can be lowered below disc to accommodate large workpieces - 3 HP 1,720 RPM Direct drive motor, Low voltage protection switch - Positive lock rack & gear table tilt

WINTERSTEIGER - DSG 150 ECO, ...Thin Cutting Frame SawSide & Center Guides: Fitted as standard on the basic machine to guarantee the broadest possible range of application. Specifications: -- 11 kW (15 HP) Main motor; 0.3 - 1.5 MPM feed speeds; 210 mm saw frame stroke with (450) strokes/Min. -- 30 - 216 mm Cutting height, adjustable as required; max. +/- 0.5 mm difference in block height. -- 60 - 150 mm Cutting width (side guide); (2) 23 - 70 mm cutting width (using center guide); (2) channels max. 72.5 mm using 7.5 mm guide or with (5) channels max 24.5 mm using variable block width; 300 mm min. block length. -- 1.5 mm Cutting accuracy; +/- 0.2 mm Cutting loss (depending on saw length). -- Max. (30) saw blades (excluding scraper saws); (3) 120 mm sawdust extraction tubes. -- "Air Jet" Module: Cleans the lamellas and saw blades during the sawing process by blowing away the sawdust; cools down the saw blades during the sawing process and cleans the shaving space of the saw blades. -- "Air Jet" also increases the saw blades life and improves the lamella's accuracy. Sawdust-free lamellas can then be glued immediately after cutting.Comes with transformer

Wintersteiger DSG Sonic Frame Saw

MLS Number 10684323 Wisconsin Automated Machine C-450 Tennoner Single end tennoner Automatic double head coping tennoner Model C-450 Serial: C-450-6901-00 230 volts, 3 phase, 60 Hz. Allen-Bradley and Motortronics electrical Motors are 230 volts 48 full load amps. 15.2 amps on largest motor

Wisconsin B20-M multiple spindle horizontal drilling machine 8' 4-HEAD 13-SPINDLE DRILLING MACHINE 3 HP DRILLING MOTORS, HYDRAULIC , AIR CLAMP Serial # B20M-6825-96 5 HP hydraulic pump: 230/460V, model CLT-30 GAL, 1050 psi, 8 GPM., serial# 1-89175-0 Four Baldor Drilling motors 3 HP, 208-230/460 volts, 3450 RPM., Baldor, Removed from a complete plant liquidation in October 2020. Stored inside a climate controlled room, Contact us for a delivered price

Demo unit with full warranty! Wolfe Ridge FC-32 32 foot firewood conveyor. Honda GX200 gas engine with recoil pull start, self contained hydraulic system with reservoir and return filter, top pull hydraulic drive, hydraulic forward AND reverse, speed control for conveyor chain, hydraulic height adjustment, heavy duty welded paddles, 81X conveyor chain, wheels rotate 90 degrees for easy slew / angle adjustment of conveyor, grizzly bars & chip chute INCLUDED! Max loading / exit height WITH GRIZZLY BARS REMOVED FC-32 = 15 foot max exit height. Price $10,995 picked up from location near Kokomo, Indiana. We can help arrange hotshot freight anywhere in the USA or Canada. Call us at 715-598-7790 for more info.

32" Vertical grinder with 25 HP motor Dentom 624 9500 BTU Furnace automated measured feed controlled by furnace temperature Holding tank for feed from the grinder which is automatically fed to the furnace...that feed is temperature controlled.

2020 Wood Beaver 18 BAB Only 245 hours Shrink wrap machine also available

#207 • Wood-Mizer EG-400 Board Edger SN: EG400EC30D1202140187, meter reads: 11187 hours, 30 hp, 460V electric motor, includes electric panel with starter and disconnect, 42" x 6' infeed rolls, 5" x 32" capacity, (2) 16" blades-both moveable

New Razor Tip Carbide Blades for Wood-Mizer LT15 Box of 5 #BC3751587S) 0.045 x 1 1/4 x 158;7° Tooth Spacing: 7/8 Price is same as Wood-Mizer. Buyer pays for shipping. Call 800-459-2148 for more info.

2007 Wood-Mizer LT300 3400 hours 3 phase Great condition Includes 80 new blades and upgraded steel spindles with new bearings

WM LT300 w/Cab. Electric Powered.

Wood-Mizer LT300 w/Cab & Log Deck

Wood-MIzer LT300 Cab W/Setworks Approx 4K Hours Mill alone or complete operation available Motivated seller

Wood-Mizer LT300 with 4200 Hrs, Cab, Electric, Setworks, Log Deck with Stop N Load, 20' Green Chain, 40HP Blower and Like New Long Belted Conveyor with Spiral Rolls On The End