Equipment For Sale

2013 Ponsse Ergo Harvester, H7 Processor Head, 13,000 Hours, Machine has Enclosed Cab with Heat and Air Conditioning, Good Centers Tracks on Rear, More Pictures Coming Soon Operating Weight 35,274 lbs Height - Top of Cab 12 ft Overall Width 9 ft Shipping Length - non tilt 25 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Ponsse Ergo Processor, H7 Processor, Machine has 17,600 Hours, Main Wiring Harness Replaced, Engine Computer,is New, New Injectors, New Rotator, New Lower Knives, New Water Pump, New Cam Sensor, Enclosed Cab with Heat and AC, New Lower Section on valve bank replaced, Ready for the Woods. Operating Weight 35,274lb Shipping Length - Non Tilt 25.2ft in Overall Width 9.32ft in Height To Top Of Cab 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Ponsse Ergo, H73E Harvester with 22,000 hours, Dry machine, Computer does not work. Operating Weight 35,274 lbs Height - Top of Cab 12.4 ft Overall Width 9.4 ft Shipping Length - non tilt 25.2 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Ponsse Scorpion King Processor, Equipped with H-7 Crane, Engine has 11,500 Hours, One Set of Eco-Tracks, Extra Bar and Chains, Has CT+ 1 Auto Tensioner, Enclosed Cab with Heat and Air Conditioner, Air Condition Just recently done by Ponsse, More Pictures of Interior Coming Soon. Comfort Grips. Weight 49,604 lbs Length 316 in Width 104–112 in Height 147 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Ponsse Buffalo Forwarder, Equipped with a K90 Loader, Mercedes Engine with Only 5600 Hours, Enclosed Cab Heat, Air, Radio, 1 Set of Tracks, All Maintenace records, Synthetic Oil 80 AW Hydraulic Oil, Four Bunks, Slide in and out. Ready for the Woods. More pictures coming soon. Weight 46,297 lbs Length 36.91ft in Width Over Tires 9.72ft in Height To Top Of Crane 12.31ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2003 Ponsse Caribou Forwarder, Equipped with 18,000 Original Hours, Mercedes Engine, 12 Ton Double Bunk Forwarder, Enclosed Cab with Heat and Air, One Set of Tracks. 1 New set of chains, Replaced Hydraulic Pump last year, Ready for the Woods. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2000 Ponsse Bison -Uknown hours -Perkins 6 cylinder diesel -New iQan control system for the crane and steering (100% joystick controls) -New Webasto preheater -Tracks and tire chains included -New Red Dot heat and AC system -Brand new LED lights -Good glass on sides and rear, front isn’t bad but not new -Has a few small leaks but otherwise ready to go to work

2000 Ponssee Cobra HS10 Harvester Cat 3116 125 crane Eberspacher Preheater 700/45-22.5 Tires New batteries Work ready

2013 Ponnse Ergo Processor, 13,000 Hours on the Engine Mercedes 270 HP Engine, C-4 Crane and H-7 Processor Head, 1000 Hours on Remaned Engine, Outer Boom Chains Replaced New Crane Bearing, Enclosed Cab with Heat and AC, Tracks available Ready for the Woods. Operating Weight 35274lb Shipping Length - Non Tilt 25.2ft in Overall Width 9.32ft in Height To Top Of Cab 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Ponsse Ergo 8 wheel Processor -12,900 hours -C44+ crane -H8 head -New head pump -New drive coupler -Pump gear box rebuilt -New windows -New exhaust -New feed wheel arms -New feed wheels -New knives -Saw motor and complete saw assembly and much more -All work done by Ponsse Ready to work

2008 Ponsse Buffalo Fowarder -17,400 hours -New boom chains -Re- sealed crane pump -Tracks are new -Recently repainted machine -Owner operated and on a job working

2022 Ponsse Bear Processor -2300+ hrs(working) -H8 head -Tires 95% -Tracks 95% -Tight and dry

Portage & Main Outdoor Wood Stove W/ Wood Chip Feeder

Porter Planer Model 700 S/N 5916, Straight Knifes 10HP Motor

Porter Cable 5HP Single Phase Compressor.

The professional horizontal splitter with longitudinal tractor chassis for mobile applications! Complete Posch Splitter, Processor and Packaging lines sold exclusively through Northeast Implement. Better cutting, splitting machines that are fast and safer, call 607-589-6160 to get yours today!

2000 Povlsen Wide-bandsaw mill. In good working condition 75hp Isuzu Diesel engine and has approximately 1500hrs on it. Mill can saw logs approximately 36"D x 25' L Comes with an Armstrong #2 bandsaw sharpener and approximately 20 new bandsaw blades.

Powerfist 1HP Dust Collector

POWERMATIC WP 2510 PLANERThe POWERMATIC "WP 2510" Planer with a 15 HP motor has a solid steel helical cutterhead with four-sided carbide knife inserts that require no adjustments when changing. With a digital readout and simple PC controller, setting up table heights is quick and easy. -- The frame is machined from heavy cast iron and has extra wide side panels that offer rigid bed support and ensure accurate alignment. -- The planer's segmented, serrated infeed roll with segmented chip breakers has an independent yield of 1/4". Its automatically adjusting, chain drive gear box powers the 3" dia. infeed rollers, solid pressure bar and dual outfeed rollers for precise feeding of stock. -- The 3-speed feed selector gives woodworkers flexibility by changing feed rates quickly and easily. -- The "WP 2510" Planer has a large 32-3/16" x 26" precision-ground table which contains two adjustable table rollers for smooth feeding of uneven stock. The planer has a Quick-Set micro-adjustable lever that easily raises and lowers the table rollers from 0 to 0.05". The hood features a built-in 5" diameter dust chute. -- SPECIFICATIONS: -- Max. planing 25", max. planing thickness 9", max. full width depth of Cut 1/8", max. depth of cut ¼". -- Min. Planing length 10", cutterhead dia. 3-3/8", cutterhead speed 5,000 RPM, cuts per minute 30,000; 15 HP motor. -- Feed Rate 20, 25 and 30 FPM, Outfeed Roller Diameter 3 "; number of Knives: (174) Four-sided inserts. -- Table Size: 32 3/16" x 26"; dust port diameter 5 ", dust collection CFM Required (600) CFM. -- Bed Rollers adjustable from front fom 0" to 0.05"; Readout Scale: inch/ metric; Table Height adjust manual with 1 Turn = 1/32", (2) column for bed support, 2-1/2" column dia.; (1) infeed and (2) outfeed rollers; includes Tool Kit.

POWERMATIC 72A 14" Table Saw w/Power FeederSpecifications: -- 7.5 HP - 3,600 RPM motor, takes 12" or 14" blade, (max. depth of cut is 5-1/8" with 14" blade), 1" dia. arbor and three V-belt drive, 0° - 45° to left tilting arbor. -- 24" Max. rip to left and right of blade; standard 38" x 48" table. -- Complete with: -- Accu-Fence Rip fence, standard table extensions, and magnetic switch. -- Includes: -- STEFF 2034 Power Feeder.