Pro Pac For Sale

2016 Deere 437D Log Loader, Engine had Rebuilt with 1,000 Hours, Frame Hours are 14,900, Enclosed Cab with Heat and Air Conditioning, New Turntable Bearings, New Collector, Resealed Valve Bank, CST PTD 496 Delimber, Kodiak Trailer, Ready for the Woods. Length 32 ft 0 in Width 8 ft 7 in Height 13 ft 6 in Weight 32,980 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 JOHN DEERE 1270G WHEELED HARESTER 6 CYL DEERE H415 HEAD

1998 JOHN DEERE 490EX WITH FABTEK FOUR ROLLER HEAD 4 CYL DEERE

2018 JOHN DEERE 1470G WHEELED HARVESTER 6 CYL DEERE H290 HEAD ONE OWNER MACHINE

2013 John Deere 648H single Arch very good tight dry Skidder man had it parked in the shed call 334-518-9900 hard to find machine

This 2004 644J John Deere front end loader was being used at a mill at the time of us buying it. We have put a brand new main hydraulic axial piston pump from John Deere in it, replaced the hydraulic filter, and replaced the main hydraulic oil filter. The tires are in good shape and the inside is okay. This loader is ready to work as is. If interested in this loader call Kameron 251/242/5493 Tim 251/366/3237 Gavin 601/394/7796 The loader is located in State Line, MS, 39362, at Old 467 Saint Peter Street.

2015 John Deere 640L Cable Skidder 5800 hours Good rubber Tracks on fronts Heat AC Runs and operates good

John Deere 440C Cable Skidder Rebuilt engine and tranny New paint Center section is tight 18.1x26 tires 90%+ Runs and operates great

2002 John Deere 848G Grapple Skidder, Dual Arch, Winch, 35 Tires, New Engine! 330 Hours on it

Like new – never used in woods – original hours 32” Triple Grouser – 9’ 2” u/c width (bare pin lift capacity is about 200lbs more with the wider u/c) Rear entry, 4552HD Rotobec Grapple

2018 John Deere 437E, 7000hrs., Very Good Condition, $75,000 – (2) Available

2019 DEERE 643L II Wheel Feller Buncher L330 Hours- 4,388 FD55 Head Felling Head- Yes Felling Head Type- Saw 30.5 tires @ 60% HD axles Serial Number- 1DW643LBTJF693605 Clean straight unit!!

2019 DEERE 3756G Track Log Loader Hours- 12,183 John Deer Powertech PSS 9.0L Processor Arm Serial Number- 1FF3756GLJD376027 ROPS- Enclosed A/C- Yes Delivery is available at the buyer’s expense

748L John Deere skidder , lots of good parts available !

2019 John Deere 437E, excellent condition, low hours, ready for work. $70,000

2009 John Deere 748H, Machine is John Deere inspected, 24.5-32 Rubber, 11,000 hrs, runs and work very well. Price $45,000

1996 Deere 653E with Processor Attachment, Fabtek 4 Wheel Roller Unit, Engine is a Deere Reman with 4,000 Hours, 19,000 Frame Hours, Hydraulic Pump Done 2000 Hours Ago, Undercarriage is 90%, Enclosed Cab with Heat, Air was taken out of machine, New Swing Bearing and Rotor Motor Redone, Ready for the Woods. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Deere 437D Log Loader, Hours are 11,900, Enclosed Cab with Heat and Air Conditioning, Turntable Bearings Tight, CSI PTD 264 Delimber and Topping Saw, Hydraulic Landing Loader 12,000 Hours, 2016 Barsaw, New Engine Turbo, Ready for the Woods. Length 32 ft 0 in Width 8 ft 7 in Height 13 ft 6 in Weight 32,980 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2015 Deere 648H Skidder, 10,590 Original Hours, Winch, Enclosed Cab with Radio, Heat and Air Conditioning, 30,5 x 32 Tires 90% Tread, Chains All Around, Center Section Tight, Well Maintained Machine, Ready for the Woods. Weight: 44,000 lbs Length: 23 ft 8 in Width: 10 ft 2 in Height: 9 ft 9 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

This 748H had been pulling wood every day before we bought it. The engine will need some work, it makes a ticking sound we’re not sure what it is, but besides that the machine is in good condition. All it would need is a newer set of tires and some engine work and this would be a very fine machine. It has 19,342 hours on it. For more information call Kameron 251/242/5493 Tim 251/366/3237 Gavin 601/394/7796 The skidder is being sold from Ala-Miss, Inc. located at 467 St Peter St, State Line, MS, 39362