Equipment For Sale

2010 New Holland E 27 SR 4319 hours Good UC Rubber tracks at 80% Work ready

New Holland C337 Track Loader Just under 1400 hours

Good Condition Enclosed Cab Comes With Matching Parts Machine

2019 New Holland C232 -1860 hours -Serviced at 1810 hours -Enclosed cab with heat and AC -Joystick control -2 speed -Super b superboom -Wide track -Power quick attach -Keyless start -Foot throttle -Radio -Air ride and heated seat -Front electric -Construction strobe kit -Orginal paint machine 1 owner -No issues leaks or codes

2021 New Holland E57C Excavator ONLY 1013 Hours, Yanmar 66 HP Diesel Engine, Grading Blade, Undercarriage is 95%, Enclosed Cab with Heater, Air Conditioning and Radio, 2 Speed Drive, Hydraulic Thumb 76" Angle Backfill Blade, Camera, Mint Condition, Ready for Work. Weight 12,566 lb Transport length 19.65' Transport width 6.30' Transport height 8.37' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

New Venture Manufacturing Gang Rip Saw Hydraulic Tank (5) Moving Blades Laser Tower Touchscreen Controls This machine has been removed from service. The photos showing the system setup were taken before it was removed

Used NYB fan , series 20 GI, 38” wheel, 21” inlet, 50HP 50 HP, other HP motors available The fan has been primed & repainted in Feb. 2025 Inlet diameter: 21-1/2” Outlet size: 20-1/2” X 17” Wheel size & type: 364 DH Wheel Diameter: 38” +-, Shop Number: B12787 Year: 2007 P.O. # 15745 Disc.: UB ROT: CW,. We have other fans available Dust cyclones are also available A Video of fan running is available We provide a wooden pallet for shipping Shipping dimensions--without pallet: 80” wide x 64” long x 63” tall detached fitting Weight with pallet: 1,800 LBS, Contact us for a freight rate.

New York Blower Co. Shop# R13016-100, Size 407RTS, 26" Inlet & Outlet, 60HP Motor, RTS Fan.

NYB GP Size 182 Bloer with Electric Motor

NYB 28" Blower

New York Blower Company 36" Pressure Blower, 15hp Baldor electric motor, fan direct mount on motor

NEWCNC - Smart ER Series I 510: CNC Router w/ATC & Lathe5' x 10' FLAT TABLE CNC ROUTER W/ATC & LATHE: Great for "Nested Base Manufacturing" or just about any type of 3-Axis work. -- Working Table: 63" (1,600 mm) x 122" (3,100 mm). - (4) Pop-Up stops to aid in panel positioning; an "M-code" controlled 4-zone electrovalve; special high flow Vacuum Table System. -- X- & Y-Axes Speed: 3,181 IPM (265 FPM / 83 MPM) & Z-Axis: 350 IPM (29 FPM / 12 MPM) for quick traverse positioning that reduces total CNC machining time between cutting cycles. - "YASKAWA" Servo drives power the axes movement. -- Industrial machine tool welded structurally engineered: Machine base provides a solid foundation for superior cut quality; entire frame is stress relieved & heat treated. -- Moving gantry bridge. Travels on: "THK" Large thick hardened & precision ground rectangle linear guide slider-ways giving extra smooth movement for high-speed traverse & accurate cutting. -- Tool Gantry & Bridge Movement: Large thick inclined rack & pinion teeth; vertical axis travels on a large diameter precision ball screw for smooth consistent movement. -- Machining: (1) 12.6 HP (9.4 kW) Air-cooled SCM Router spindle with: "HSK 63F" Adaptor; variable programming speeds: From 1,000 to 22,000 RPM. -- Tools are loaded into the "SCM" spindle by: (1) 8-position plate "on the fly" ride along carousel ATC (automatic tool changer). -- Tool heights can be set using the Tool Length setting gauge (included); machine requires ER-32 tool collets. -- CNC Control: Industrial Grade "OSAI 10/510" OPEN CNC control with: 19" Color monitor; includes self-diagnosis & alarm history display & background editing; up to (4) simultaneously controlled axes with: 3D simulation; helical interpolation; tool offset; length compensation & backlash compensation. -- Compatible with virtually all CAD/CAM programming software on the market; you choose the software that best suits your needs. -- Includes: (1) 7-1/2 HP (5 kW) "Rotary Vane" type Vacuum Pump. -- Complete with: Dust hood with 6" manifold connection; Tool Length setting gauge; "MPG" handheld wheel remote; safety bumper system on both sides of the moving bridge; safety bar around the back of the machine. -- Options Include: (1) 12' Lathe attachment with: Chuck & tailstock (...$ 8,450 value); (1) additional 7.5 HP (5 kW) Rotary Vane Vacuum Pump (...$ 5,150 value).

NEWCNC - Smart ER Series II 510: CNC Router w/ATC & Boring5' x 10' FLAT TABLE CNC ROUTER W/ATC & BORING: Great for "Nested Base Manufacturing" or just about any type of 3-Axis work. -- Working Table: 63" (1,600 mm) x 122" (3,100 mm). (4) pop-up stops aid in panel positioning & a "M-code" controlled 4-zone electro valve special high flow vacuum table system. -- X- & Y-Axis speeds are: 3,181 IPM (265 FPM / 83 MPM) and Z-axis is 350 IPM (29 FPM / 12 MPM) for quick traverse positioning that reduces total CNC machining time between cutting cycles. - "YASKAWA" Servo drives power the axes movement. -- Industrial machine tool welded structurally engineered machine base provides a solid foundation for superior cut quality; the entire frame is tress-relieved & heat treated. -- The moving gantry bridge travels on: "THK" Large thick hardened & precision ground rectangle linear guide slider-ways giving extra smooth movement for high-speed traverse & accurate cutting. -- Tool gantry & bridge movement by: Rack & Pinion w/large, thick inclined teeth; the vertical axis travels on a large dia. precision ball screw for smooth consistent movement. -- Machining. (1) 12.6 HP (9.4 kW) Air-cooled SCM Router spindle with: HSK 63F adaptor, variable programming speeds from 1,000 to 22,000 RPM. -- Tools are loaded into the "SCM" spindle by: (1) 8-Position plate "on the fly" ride along carousel ATC (automatic tool changer). -- Tool heights can be set using the Tool Length setting gauge (included); machine requires ER-32 tool collets. -- CNC Control: Industrial grade "OSAI 10/510" OPEN CNC control with: 19" Color monitor; includes self-diagnosis & alarm history display & background editing; up to (4) simultaneously controlled axes with: 3D Simulation, helical interpolation, tool offset, length compensation, & backlash compensation. -- Compatible with virtually all CAD/CAM programming software on the market; you choose the software that best suits your needs. -- Includes: (1) 7-1/2 HP (5 kW) "Rotary Vane" type Vacuum Pump. -- Complete with: Dust hood with 6" manifold connection; Tool Length setting gauge; "MPG" handheld wheel remote; Safety Bumper System on both sides of the moving bridge, and safety bar around the back of the machine. -- Options Include: (1) 10-Spindle Vertical Boring Block with (5) independent spindles in "X" axis & 5 independent spindles in "Y" axis (...$ 8,450.00 value). (1) Additional 7-1/2 (5 kW) Rotary Vane Vacuum Pump (...$ 5,150 value).

Newman M-255 Automatic Feed Table Recently refurbished Updated with electric drive motors

Newman KF-24 Gang Rip with 100HP Electric Motor

9 Blade station w/ individual motors, built-in powered waste conveyor Working when removed from service in 2018. Removed from service because plant ceased operations.

Newman 5 Saw KM16 Trimmer. Main Shaft re-bushed 2 years ago. Located in SC. #C978

Newman KM16 5 Saw Trimmer. 16' Max Length. Located in Alabama. #C982

NEWMAN/Cameron - KF-24: Dip Chain Gang Rip Saw with CAMERON "34H-M1" Infeed SystemSpecifications -- Saw Arbor: 24" Arbor cap.; 14" max. dia. tooling; 4" max. motorized thickness adjustment;22" min. length for glue joint accuracy; 6" throat. -- 2-13/16" Dia. arbor; 24-1/2" capacity saw sleeve arranged for 3-1/8" dia. bore saw blades; saw blade options: 10" - 14" Dia.; spacers: 4-5/8" dia. includes: (1) Saw sleeve and spacers. -- 75 HP - 3,600 RPM TEFC Direct drive motor; arbor with: Disc brake & load meter; arbor lockout on the access door. Feed & Chain: -- 5 HP Variable feed speed: 20 to 100 FPM with: Jam arbor protection. Dip bed carried on: 5" Pitch hardened Double-V chain; hardened dip cams; extruded structural aluminum feed bed slats with: Replaceable steel-backed rubber insert strips; automatic chain oiler with low level shutoff. -- (2) 4" Dia. air loaded overhead pressure rolls; spring-loaded overhead bed plate; pressure rolls & bed plate unit with motorized adjustment; slide type infeed guide with: Handle block; either side of the guide can be used for a stock engraver. -- Anti-kickback finger system with: (1) Lower & (2) upper on infeed; (1) upper kickback on outfeed. Equipped with & Features: Upper outfeed main dust hood: 7-7/8" Dia. 2,150 CFM Infeed dust hood 4-7/8 dia. (855 CFM). (1) Spare sleeve; (2) setup fixtures; generous array of spacers (see photos).