Planers For Sale

Newman 282 Wood Planer 18 inch wide planning capacity by 6 inch thickness Newman 6 row Quite-cut carbide cutterhead 50 to 75 percent carbide knife life remaining 40 HP 3600 rpm top head motor-DMD 25 HP 3600 rpm bottom head motor- DMD 15 HP hydraulic pump package Feed speeds : 40 to 150 feet per minute Rubber tire feed – one row in-feed and one row out-feed. Dust hood Carbide knife grinder and jointer Cleaned and tested

Newman S-382 with Helical Quiet Cut Planer Heads & Hydraulics to Run it. (not pictured)

Newman S282 Planer

Newman S-382-HD Planer S/N 14069 - 7379 Hrs - 40HP Top Arbor & 75HP Bottom Arbor Includes Hydraulic Power Unit.

Newman S-382 Double Head Planer (Straight Knives) w/Hydraulics & Controls S/N 15292

NEWMAN WHITNEY S-282-18 Top & Bottom Planer 18" Wide Fully ReconditionedSpecifications: -- Shortest Stock (not butted) 48" -- Top Head: 40 HP 3,600 RPM Direct Drive -- Bottom Head: 25 HP 3,600 RPM Direct Drive -- 15 HP Hydraulic Power Unit for Top Infeed & Outfeed rolls -- Infinitely Variable Speed Feed Control from 40 - 150 FPM -- Newman Six-Row "Quiet Cut" Helical Carbide Cutterheads -- Feed Works Consist of Two Pivot Mounted Top Feed Rolls -- Top head Chipbreaker with 3" Sections and Independent Yield of 1-1/2" -- Air Operated Pressure Bar -- Top Head Power Hoist -- Automatic Cut Control -- Anti-Lap Device -- Grinding & Jointing Equipment -- Dust collection required - 6400 CFM total (3545 Top and 2855 Bottom) with 6500 FPM velocity at each portEquipped With & Features: -- Infeed Conveyor is Hydraulic Driven 192" Long X 18" Wide -- Push Button Controls -- Hydraulic Pump Unit 15 HP, -- Cutterhead Grinder and Jointer Included

Newman Whitney S-282 24inch Double Surface Planer w/Helical Cutter Heads, Hyd Power Pack and electrical Control Cabinet

Newman M712 4-sided planer Infeed deck with unscrambler Infeed conveyor Outfeed conveyor Greenchain

Newman 500 Planer w/power panels, S/N 9089, $15,000

Newman Planer Pineapple Infeed

Newman S-382-HD Straight Knife Planer with Hydraulics & Controls S/N 14267

NORTHTECH NT 1000-50HCVS Single-Sided 40" PlanerSpecifications: -- 40" Planer, 40 HP main motor, Helical Head, Adjustable bed rollers 15 mm x 15 mm x 2.5 mm Carbide Insert cutters. -- The spiral cutterhead provides a high chip removal rate, superior surface finish and low noise. -- Powerful 40 HP cutterhead motor makes this planer ideal for heavy-duty planing and meets high production requirements. -- Variable feed speed is mechanical variable from 0 - 90 FPM. -- Power elevation of the feed bed with "727 M Digital Table Adjustment" for fast accurate, and convenient thickness setting. -- Extra heavy rib reinforced cast iron table, surface precision ground. Equipped with: -- (4) Powered steel bed rollers. -- (4) Upper rollers. -- (2) Powered corrugated infeed rollers. -- (2) Powered urethane outfeed rollers. -- Upper and lower limit switches for opening control. -- (4) Dual 50 mm jack screws for raise/lower bed movement; 12" max opening. -- 2 HP Elevation motor with manual adjust. -- Rear E-Stop for added safety. -- Dual 6" dust ports requiring 1,000 CFM @ points of extraction.

NORTHTECH NT-610HC Double Surfacer:Specifications:: -- 24" x 8" Cap., min. Material length: 12". Table size is 111" x 24". -- 40 HP top and 30 HP bottom belt-driven motors -- Minimum working length is 12" and minimum working thickness is 1/4". -- Variable feed speed 20 - 110 FPM powered by a 3 HP feed motor -- Feed works driven via gearbox and heavy-duty Cardan Shaft Drive -- 1 HP motor for table raise & lower and (4) ball screws. -- Both cutter heads are spiral insert knife heads with 30 x 12 x 2.5 mm insert-type knives.Features: -- Rugged cast iron and plate steel fabrication; -- Infeed conveyor/carpet (spiked) allows precision jointing accuracy, especially on warped or twisted lumber. -- Computerized top cutterhead positioner is accurate to +/-0.001"; -- Chromed beds; Guards and skirts for operator safety. -- Machine dimensions: L2830 x W185 x H1700 mm, Weight: 10,500 Lbs -- Dust Collection: 3600 CFM

OLIVER 4430 20" PLANER WITH HELICAL HEAD20" Maximum stock width cap., 1/4" to 8" max. stock thickness, 10" minimum stock length. Equipped with: -- 5 HP Main drive motor and mechanical raising and lowering of the cutter head. -- Fixed bed height of 29-7/8". Table dimensions 20"L X 21"W. Overall all table dimensions with infeed and outfeed bed extensions 51"L X 21"W. -- 3-1/4" Dia. Helical Cutter Head with 4-sided carbide inserts. -- Auto-Depth lock via nitrogen-charged cylinders eliminates snipping. -- 8" Max. thickness adjustment via handwheel includes LED Digital readout for head positioning. -- 4-Post support for proper head alignment.Complete with: -- 5" Dust outlet and built-in mobile base for ease of movement

OLIVER - 2072: Double-Sided StraitoPlanerWorking cap. 30" x 8".Specifications -- 1/2" to 8" Thickness. -- Minimum length: 12" Butted or 16" singly. -- Maximum cut of lower head: 1/2". -- Top head motor: 75 HP. -- Bottom head motor: 60 HP. -- Variable feed : 40 - 120 FPM With 3 HP motor. -- Hoist motor: 2 HP. -- Top infeed spring loaded finger carpet; holddown chain. Complete with: -- OLIVER "ITCH": Insert-Tooth cutterheads top &bottom. -- Dust outlet: (2) 8" Diameter; requires: 2,800 CFM at 4,000 FPM velocity.Could be sold: "As is" or "Fully reconditioned!"

OLIVER 4470 25" Shelix Cutterhead Planer; 10 HP motor Single Phase, or 15 HP 3-Phase motor. Full 25" of cutting width, over 9" of cutting capacity, and the ability to take up to 1/4" off in a single pass through , Byrd Shelix Cutterhead this planer will take whatever you can dish out. -- The Digital Thickness Controller and Powered Table Travel eliminate guesswork, make dialing in settings a breeze. But ease of operation isn't everything, this OLIVER outputs stock that's true and straight. -- A Sectional Infeed Roller and Chip Breaker apply uniform pressure on uneven stock, coupled with a Driven Outfeed Roller to keep your stock in place. -- And a powerful 10 HP motor Single Phase motor, or 15 HP 3-Phase motor.

OLIVER 15" Planer with Helical Cutterhead - 10014, 3 HP (Single Phase)Unique design allows motor and cutter head to move in unison.Specifications: -- Auto-depth lock features twin nitrogen cylinders virtually eliminates snipping. -- Helical cutter head with premium carbide inserts. -- 4-Sided cutting inserts are indexed and easy to replace. -- Heavy cast iron construction including extension wings. -- Table and extensions wings are precision ground for smooth stock feeding. -- Table is fixed allowing easy use of auxiliary stock support. -- Wixey digital read-out allows precise thickness settings. -- Large handwheel and support struts allow easy height adjustment. -- Four-post design ensures head alignment regardless of stock thickness. -- Two-speed feed gearbox for better cuts, Oil bath gear lubrication for years of performance.Complete with: -- 4"; Port allows excellent dust management. -- Built-in mobile base allows easy movement in the shop. -- Magnetic switch for added protection and safety.

22"; Planer with Byrd Shelix Cutterhead - 4455B, 7.5 HP shingle phase or 10 HP, 3-phBYRD Shelix carbide inserts are indexed for quick changing.Specifications: -- Max depth of cut 3/16", min. part length 10"; max. work pc dims 22" w x 9" thickness. -- (2) Adjustable Bed Rollers, plus one infeed and one outfeed roller. -- Cutterhead speed 5,000 RPM and head is equipped with (110) Byrd knife inserts. -- 2-Speed gearbox provides the perfect feed rate of 20 and 30 FPM.Features: -- Massive cast iron construction throughout. -- Polished built-in table roller assists movement of rough stock. -- Segmented infeed roller and sectional chip breaker easily handles rough stock. -- Magnetic controls with emergency off switch for safer operation. -- Digital readout allows precise thickness settings. -- Hinged access to cutter head and feed rollers for quick set-up. -- 3 V-belt drive smoothly transfers power to drive train and cutter head. -- Easy access to the motor, drive train, and gearbox assists in maintenance and adjustment. -- 5"; Dust chute easily handles chip removal (requires approx. 900 CFM) -- Powerful EFC motor available in single or three-phase. -- Single phase motor 7.5 HP, 220V Only (38 Amp)

OLIVER 4470 25" Straight Knife Planer Full 24" of cutting width, over 9" of cutting capacity, and the ability to take up to 1/4" off in a single pass through the 4-knife standard cutter head, this planer will take whatever you can dish out. -- The Digital Thickness Controller and Powered Table Travel eliminate guesswork, make dialing in settings a breeze. But ease of operation isn't everything, this OLIVER outputs stock that's true and straight. -- A Sectional Infeed Roller and Chip Breaker apply uniform pressure on uneven stock, coupled with a Driven Outfeed Roller to keep your stock in place. -- And a powerful 10 HP motor Single Phase motor, or 15 HP 3-Phase motor. --OPTIONAL EQUIPMENT: Byrd Shelix Cutterhead (ADD $2,400)

OLIVER - 299: Single Surface Planer24" Width x 8" thickness cap.; Cabinet Planer. -- 5 HP Cutterhead motor. -- 2 HP Gear box; variable speed feed works with speeds: 15 - 60 FPM; sectional feed rolls; sectional chipbreakers. -- Complete with: -- Knife grinding attachment. -- Top dust hood; Quick Set Adjustment on bed rollers.One of the "Original" OLIVER Planers!