Equipment For Sale

The 2018 Morgan Chop Saw package is a complete unit ideal for pallet operations, offering efficiency and precision in cutting tasks. This used model includes essential components such as a waste-away belt conveyor, a hydraulic unit, and a blower, ensuring smooth material handling and removal processes. Equipped with air stops and controls, this chop saw provides reliable and manageable operations. With its sturdy construction and essential features, this package is suitable for various industrial applications where accurate and high-output chopping is required. The integrated components work seamlessly to facilitate tasks, delivering a consistent performance even in demanding environments. For specific inquiries and pricing, directly contacting the supplier is advised.

Morgan Trim Saw 5' Capacity

Morgan Double Head Notcher Unscrambler Electrical: 480v, 60hz, 3ph This machine is equipped with a hydraulic unscrambler. Includes 5hp Hydraulic Pump. Unscrambler and the saw are able to handle wood planks 26”-70” long approx. Notcher is equipped with (2) 9.5” notching cutterheads. Each notching cutterhead has individual manual lateral adjustment controls.Each head is belt driven via dedicated 25hp motor. Includes control panel with push button controls. Includes side mounted electrical cabinet. Serial: 030102170

4hd Morgan Bandsaw- Line Shaft ready with Return. Located in MI. #C971

Brand new wiring through whole machine | New Control Panel and Switches

Morgan Scragg. Located in ID. #C963

Morgan single head resaw with return belt, electric drive, very good condition and ready to work. Has 3 phase 460 volt plugs.

Morgan 2Saw 16' Trimsaw Line. With in-feed Coveyors. Located in GA. #C959

480V | 72" Max | W/ Unscrambler

72" capacity, 3 ph., 480v, with the unscrambler.

MIC (Morris Industrial) Bar Type Unscrambler. No drive. Very nice. Length: 22' 1"; Width: 11' 3"; Height: 8' 2"

MOTIMAC FR650 5-Head Abrasive Brush Sander with (3) top & (2) side heads: -- Specifications:Two sides heads & Three tops heads • Side heads able to sand in multiple angles • Independent height adjustment on all hubs • Independent operation of each hub • Siemens electronic controls • Capable of sanding flat or profiled surfaces • 25"; Working Width • Side heads adjust to sand from 2";wide to 25";wide pieces. -- Working Capacity:Maximum Sanding Width 25“; Minimum Working Length 21.5"; for Edge Sanding Rollers & 15"; for Horizontal Rollers. -- Working Height 0.12"; - 4";; Variable Feed Speed 10 - 55 FPM (3-17 MPM). -- (2) 100-450 RPM Side Heads @ 0.75 HP ea. & (3) 60-450 RPM Top Heads @ 4 HP. Total Power 15.5 HP (11.5 kW).

Motoman Robot Refurbished a few years ago. In good working condition.

ME R80 14" Radial Arm Saw

MSI - AT-643: Horizontal Auto-Tie Baler with Infeed ConveyorSpecifications: -- 60" x 43" Feed opening. -- Bale size: Variable x 43" x 30". -- Bale weight: 900 - 1,700 Pounds; OCC" 5 TPH. -- Cylinder: 7"; repacked. -- Motor: 40 HP. -- New hydraulic pumps; new "T-1" Liners on floor & platen. -- 60" Wide x 25 feet long slider bed; conveyor included.

Infeed Deck & Conveyors. Infeed Deck: 12' motorized chain driven - 4 metal chains. Stationary table with 4 sets of 5.5" rollers for Moulder

MTA DE 0175 Refrigerated Air DryerR134A refrigerant offers high overload capacities.Easy to use and maintain.Operation in high ambient of 115°F.Lowest dew point provided by thermal storage acts as a buffer covering sudden load variations.Stainless steel demister removes condensed moisture at all air flows.Environmentally safe – no risk of cross contamination between refrigerant and compressed air

MTB BDV-1200 SHREDDER --Specifications Per Manufacture's Information --ROTOR Length: 1200 mm (47.2 INCH) Diameter: 416 mm (16.4 INCH) -- 150hp 460 volts -- The unique features of our BDR shredders allow for the most efficient size reduction of difficult material types at the lowest operating costs on the market -- Includes Stand and Hopper

Harp Series machining Center for long and narrow parts! Available in 4 or 5 axis systems. Robotic material handling options! The HARP Series, specifically designed for processing High Aspect Ratio Parts (long & narrow parts), is typically customized with Clamping Fixtures and Spindle Configurations specific to the parts being manufactured. With the ability to operate with up to four (4) independently and simultaneously controlled cutting heads, the HARP machines increase throughput of up to 10 times compared to traditional CNC machines. In the door & window industry HARP machines can be found producing over 1,600 door jambs per 8-hour shift with fully automated load/unload systems.

Heavy Duty 5-Axis Machine ideal for high speed and precision routing/sizing/milling/triming & surfacing of wood & composite parts, as well as machining light alloys. -- Steel bar table with threaded holes in 23.6" x 11.8" (600 mm x 300 mm) centers for attaching fixtures and vacuum jigs; system comes with one removable center safety wall for penular load and unload work. -- Axis strokes & quick positioning speeds: X-Axis is 120" (3,050 mm) at 275 FPM (84 MPM); Y-axis is 62.2" (1,580 mm) at 275 FPM (84 MPM); Z-axis is 35.4" (900 mm) at 131 FPM (40 MPM). -- A-Axis is +/- 120° at 30 RPM.; C-axis is +/-360° at 30 RPM. -- Equipped with: (1) 7.5 kW (10 HP), ISO 30 Type air cooled ATC spindle, variable speed from 1,000 - 24,000 RPM with 8-position tool rack. -- "OSAI 10/510" Series CNC Control operating with WINDOWS/XP "Pro Multilingual", 15" LCD color display, large hard disk for program storage, network ready via Ethernet. -- Features: 5-Axis simultaneous motion, M & G code programming operation. -- Complete with: Safety enclosure and automatic doors. -- Options: A- & C-Axis alignment system for re-setting both polar axes, please add ...$ 3,600; Radio touch probe system add ...$ 9,580; OSAI Teach Pendant System add ...$ 3,775.