Equipment For Sale

Morbark Vibrating Conveyor Sawdust Screen, Drive Unit But No Power, New Paint, 15" Pan, 6" Sides

2013 Morbark 6600 Wood Hog Horzontal Grinder, Cat C32 with 8400 hours, Parked it 6 months ago. It ran until it was parked. Remote works. Known issues: Needs muffler Needs pto O ring Under side of yoke needs to be cut out and new plate put in. It ran till the day they cut it off so I’m sure they can get it running fairly quick. Needs a good amount of welding work under the yoke and around the mill. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Morbark 6600 Track Horzontal Grinder, Cat C32 1200 hp with 10,022 hours, Radio Remote, Magnetic Head Pulley. Work done. 5/23 fan pump replaced $8000 6/22 poclain feedwheel motor replaced. $20,000 4/24 Fan bearing replaced. $2000 5/24 yoke cylinders rebuilt. $500 5/24 new belly belt and all new parts associated with except the pulley drum. Shaft, b-locs and bearings replaced. Also metal siding and skirt. $8-10,000 6/24 2 new turbos. $12,000 6/24 new fan motor and side load adapter. $6500 6/24 feedwheel bearing replaced. Possibly shaft. $1500 6/24 discharge bottom bearings replaced Work done to infeed floor. Belly belt motor rebuilt. 3 injectors have been replaced. 2 out of 3 wiring harnesses replaced. Rebuilt fan motor. Has newer grates. (2) 8” hex. (2) 7x16 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Morbark 6600 Horizontal Grinder, one owner. 91,440 lbs. Length: 44'11" in transport Height: 13'6" in transport Width: 11'10" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Morbark 6600 Horzontal Grinder with 7,600 hours, Cat C-32 Engine, 1050hp, 5th Wheel, Radio Remote, Magnetic Head Pulley. Weight: 91,440 lbs. Length: 44'11" in transport Height: 13'6" in transport Width: 11'10" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2010 Morbark 6600 Horizontal Grinder, Cat C32 1200hp with 5,596 hours, Radio remote, Magnetic head pulley. Weight: 91,440 lbs. Length: 44'11" in transport Height: 13'6" in transport Width: 11'10" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Morbark 6600 HG Rebuilt CAT 1000 Hp engine Approx 2100 hours Magnet Great for processing pallets, brush, green waste & more

Morbark 66" chipper

Morbark 66" Chipper

2007 Morbark 950 Tub Grinder -3000 hours -CAT 3056EATTAC engine (172hp) -Ready to work -Videos available upon request

Cat C.88 liter engine, 3525 hrs. In good working condition. Price reduced!

Rebuilt Deere 600HP engine, 6 pocket 3/4" chip drum. Wireless Remote

MORBIDELLI AUTHOR 330 FLAT TABLE MACHINE (ATC & BORING) -- Specifications4' x 10' Stationary extruded aluminum "MATRIX" table for "Nested Base" manufacturing. -- Work Area:"X" Axis is 113.85" (2,892 mm); "Y" axis 50.78" (1,290 mm); "Z" axis stroke is 11" (280 mm); max material thickness 4.7" (120 mm). -- NOTE: When using the "Rake System," "4' x 8' is the max. panel size. -- Positioning Speed"X" Axis 262 FPM (80 MPM); "Y" axis 148 FPM (45 MPM); "Z" axis 74 FPM (22.5 MPM). -- Closed loop AC Servo drive system with: Recirculating ground ball screw in the "X", "Y" & "Z" axes; all axes ride on precision prism linear guideways. -- WorktableAluminum grid "MATRIX" vacuum table machined with a square grid pattern for fixturing parts; grid pattern allows use of vacuum pods or closed cell rope gasket material and use of spoil boards. -- (2) Independent working areas; external pop-up reference pins located on the sides & back of the table for positioning parts. -- Boring Unit2 HP (1.5 kW) - 4,000 RPM motor; (12) independent vertical boring spindles: (7) Spindles in "X" axis & (5) spindles in "Y" axis. -- Machining (1) 10 HP (7.5 kW) "Power 2000" Electrospindle w/lifetime lubrication and HSK F63 adaptor; spindle speeds from 900 - 18,000 RPM. -- (1) 12-Position "Rapid-12" traveling ATC tool plate for "on the fly" ATC. -- Operator InterfacePC Front-End with: NUM 1040 + Xilog III + Windows Operating System. -- 12" High resolution CRT, ergonomic keypad; 1.44 MB & CD ROM disk drives; (2) serial ports: RS-232 & RS-242. -- All housed in air-conditioned cabinet with: KELVIN Air conditioner. -- Complete with:(2) 300 cbm/Hr Vacuum pumps; emergency stop rope; Safety "Bump-Stop" system; Handheld pendant control. -- Options IncludedNesting Rake & off feed table to increase machine/Operator output -- "SOUTHWORTH" Lift Table; roller conveyor section to bridge safety barrier. -- (1) 10 HP (7.5 kW), 460 V, 3 Cy DUSTEK 3-bag Dust Collector. -- Actual model: MORBIDELLI - AUTHOR 330 NBR

MORBIDELLI AUTHOR 503 FT CUSTOM CNC MACHINING CENTER (W/ATC): -- Specifications:4' x 8' Custom Stationary Extruded Aluminum Table for "Nested Base" manufacturing;Working cap. "X" axis is 125.2" (3,180 mm), "Y" axis is 41.3" (1,050 mm) for routing "Z" axis stroke is 5.7" (144 mm); max. material thickness is 3.1" (80 mm) -- Positioning speed:"X " & "Y" axis is 213 FPM. (65 MPM), "Z" axis is 82 FPM (25 MPM). -- Work Table: 4' x 8' Custom Stationary Extruded Aluminum Table for "Nested Base" manufacturing;(2) pneumatic side stops, (2) working areas -- Machining Units:(1) 10 HP (7.5 kW) Vertically mounted electro-spindle router with ISO-30 adapter, LH & RH rotation, inverter driven from 12,000 - 18,000 RPM,(1) 5-position ATC tool rack mounted on the LH side for automatic tool change, -- Operator & Machine Control:Separate control cabinet with Morbidelli "TRIA 7500" CNC Multi-processor, VGA monitor, ergonomic keypad, 3-1/2" disk drive, and (2) serial ports RS-232 & RS-242.Offers incredible list of functions from (a) auto-diagnostic to (z) zooming; -- Complete with: Voltage stabilizer 208. 230, 460 V, 60 Hz, 3 Phase Auto Transformer (1) 100 m³/Hr vacuum pump. -- Actual model is MORBIDELLI AUTHOR 503 FT CUSTOM

MORBIDELLI AUTHOR 504 R CNC MACHINING CENTER (W/ATC/BORING): -- Specifications: Working Cap. "X" Axis 139-3/8" (3,540 mm); "Y" axis 48-3/8" (1,230 mm) for routing & 39.6" (1,008 mm) for boring; "Z" axis 3.1" (80 mm). -- Positioning Speed:"X" Axis 213 FPM; "Y" axis 131 FPM; "Z" axis is 65 FPM. -- Worktable:(8) Adjustable panel supports each with: (3) Vacuum pods; worktable setup for (2) independent working areas. -- Boring Unit:(29) Independent vertical boring spindles forming a T-configuration with: (15) Spindles on the "X" axis and (14) spindles on the "Y" axis.A total of (8) horizontal spindles with: (3 + 3) on "X" Axis; (1 + 1) on "Y" axis. -- Machining:(1) 9 HP (7 kW) Vertically mounted router; inverter driven (FUJI) at 12,000 - 18,000 RPM.(1) 8-Position ATC for Automatic Tool Changer. -- Operator & Machine Control:"NUM CN" Loaded onto a HP, PC Based Controller mounted in separate control cabinet.15" VGA Color monitor and ergonomic keypad. Remote Control Pendant: Allows the operator to move around and still control all the axis movements, speed, and emergency stop.Includes: USB Ports; (2) serial ports RS-232 & RS-242 (requires no 3rd party CAD system for downloading programs). XILOG-PLUS OPERATOR Interface: Offers incredible list of: Functions from (a) Auto. diagnostic to (z) zooming; controlled acceleration & deceleration, encoder feedback, dynamic tool correction via PLC due to active tool wear using space-and-time criteria; programs can be transferred via diskette or downloaded by wire. Equipped with: Onboard mini-CAD with built-in programming for writing circles, ellipses & angles with only a few keystrokes; on-board cycle optimization, on-board calculator, mirror imaging, and repeat imaging. -- Complete with:(1) 100 cbm/Hr Vacuum Pump. -- Actual model is: MORBIDELLI - Author 504 .

MORBIDELLI AUTHOR 636 FLAT TABLE MACHINE (W/ATC/RAKE): -- Specifications:5' x 12' Stationary extruded aluminum "MATRIX" table for "Nested Base" manufacturing. -- Work Area:"X" Axis 144" (3,660 mm); "Y" axis 57.8" (1,470 mm) for routing & 48" (1,230 mm) for boring; "Z" axis stroke 11" (280 mm); max. material thickness is 7" (180 mm). -- Positioning Speeds:"X" & "Y" Axes 262 FPM (80 MPM); "Z" axis 74 FPM (22.5 MPM).Closed loop AC Servo drive system with: Recirculating ground ball screw in the "X", "Y" & "Z" axis; all axes ride on precision prism linear guideways. -- Worktable:Aluminum grid "MATRIX" vacuum table machined with: Square grid pattern for fixturing parts;, grid pattern allows use of vacuum pods or closed cell rope gasket material and use of spoil boards.(2) Independent working areas; external pop-up reference ins located on the sides & back of the table for positioning parts. -- Boring Unit:3 HP (2.2 kW) - dual speed 4,500 & 6,000 RPM motor; (12) vertical spindles with: (7) spindles in "X" axis & (5) spindles in "Y" axis.(6) Horizontal spindles with (2 + 2) in "X" axis & (1 + 1) in "Y" axis. -- Machining:(1) 15 HP (11 kW) "Power 2000" Electro-spindle w/lifetime lubrication and HSK F63 adaptor; spindle speeds from 900 - 18,000 RPM.(1) 12-position "Rapid-12" traveling ATC tool plate for "on the fly" ATC. -- Operator & Machine Control:PC Front End with: NUM 1040 + Xilog III + Windows Operating System.Includes: 12" High resolution CRT, ergonomic keypad, 1.44 MB & CD ROM disk drives, (2) serial ports RS-232 & RS-242. All housed in air-conditioned cabinet with a KELVIN air conditioner. -- Complete with:(2) 250 cbm BECKER "VTLF 250" Vacuum pump with: Emergency stop rope, handheld pendant control. -- Options Include:Nesting Rake: Off feed table to increase machine/operator output; (1) 208/230/460 Volt transformer. -- Actual model - MORBIDELLI AUTHOR 636 S.

MORBIDELLI AUTHOR M400 FR FLAT TABLE MACHINE(W/LOADING/RAKE/OFFLOADING): -- Specifications:5' x 12' Stationary extruded aluminum "MATRIX" table for "Nested Base" manufacturing with "Rake" and "Automatic Off-Loading Conveyor".Loading/working/processing direction is from LH (facing to RH (facing). -- Work Area:"X" Axis 143.7" (3,650 mm), "Y" axis 62.9" (1,600 mm), "Z" axis stroke 11" (280 mm), max material thickness is 6.69" (170 mm). -- Positioning Speeds:"X" & "Y" Axis 279 FPM (85 MPM), "Z" axis 98 FPM (30 MPM).Closed loop AC servo drive system with Precision Rack/Pinion in "X" axis & recirculating ground ball screw in the "Y" & "Z" axis.All axes ride on precision prism linear guideways. -- Work Table:5' x 12' Aluminum grid "MATRIX" vacuum table machined with a square grid pattern for fixturing parts, grid pattern allows use of vacuum pods or closed cell rope gasket material and use of spoil boards.(9) Independent, NC controlled working zone areas; external pop-up reference pins located on the sides & back of the table for positioning parts. -- Boring Unit "F37L2":3 HP (2.2 kW) - variable speed up to 7,000 RPM motor; F37L2 Boring Block with (24) Vertical spindles with (10) independent vertical spindles in "X" axis & (14) spindles in "Y" axis.The 10-spindle "X" axis boring unit is NC controlled with a 11.5" (293 mm) "Y" adjustable spread from its home position & independently controlled according to the drilling pattern being performed, this feature is IDEAL for high-speed line hole drilling.(12) Horizontal spindles with (4+4) in "X" axis on the programmable Independently NC controlled 10-spindle vertical boring unit, & (2+2) on the 14-spindle boring unit in "Y" axis. (1) NC controlled 0° - 90° "X" / "Y" Grooving Saw for max. 120 mm dia. blade. -- Machining:(1) 16.5 HP (12 kW) "Power 2000" Electro spindle w/lifetime lubrication and HSK F63 adaptor, NC controlled spindle speeds from 900 - 18,000 RPM.(1) 16-position "Rapid-16 traveling ATC tool plate for "on the fly" ATC NC Touch-off Probe for automatic Tool Length setting. -- Operator & Machine Control,PC Front End with XILOG PLUS + Windows "7" operating system. 17" high resolution LCD flat screen; ergonomic keypad.USB Ports, serial ports RS-232 & RS-242 & Ethernet adaptor.Programs can be transferred via USB or downloading by wire is possible; all computer components are mounted on a mobile stand. -- "XILOG Plus" offers incredible list of functions from: (a) Auto-diagnostic to (z) zooming; controlled acceleration & deceleration; encoder feedback; dynamic tool correction via PLC due to active tool wear using space-and-time criteria. -- Additionally equipped with: Onboard mini-CAD with built-in programming for writing circles, ellipses, & angles with only a few keystrokes.Onboard cycle optimization; onboard calculator; mirror-imaging and repeat imaging; all electronics mounted in an air conditioned, dust-free environment control cabinet. -- Complete with:(3) 300 m³/Hr "BECKER" Vacuum pumps;

This machine was purchased new. The seller has changed contracts and no longer needs the system for their application. 2019 Morbidelli P200 5 X 12 Contour Edgebander Eye M Controller with 21.5? Touch Screen Hand Held Pendant w/ 7? Touch Screen Air Conditioned Cabinet 20.5 HP Liquid Cooled Router Tool Touch Probe 12 Position Ride Along Tool Changer 14 Position Side Tool Changer 17 Vertical Spindles 8 Horizontal Spindles / 3+3 in X and 2+2 in Y Hinge Unit Edgebanding Unit Standard two Coils Magazines on Safety Enclosure Additional Support for 6 Coils EVA or PUR Glue Aggregates for 3mm PVC Flexmatic Table with 8 Rails 8 Lifting Rails Variety of Vacuum Pods HE Pods Conveyor for Dust Busch Mink Vacuum Pump Pro Speed w/ Safety Enclosure

Morbidelli Planet P800 CNC Router

MORBIDELLI N 100 15 FLAT TABLE MACHINE (W/ATC/BORING/RAKE): -- Specifications: 5' x 12' x 37" H High-efficiency laminate aluminum with Magnetic vacuum locking system.Grid pattern allows use of vacuum pods or closed cell rope gasket material & use of spoil boards for nested base machining, Part location pop-up pins mounted on table perimeter, Chips conveying device. -- Working Area: X-Axis 3,686 mm (145.12"), Y-Axis 1,555 mm (61.22"), Z- Axis 150 mm (5.91"). -- Travels:X-Axis 4,230 mm (166.54), Y-Axis 1,985 mm (78.15"), Z-Axis 250 mm (9.84"). -- Positioning Speeds: X- & Y- Axes 35 MPM (114 FPM), Moving Gantry, High precision rack & pinion system for X & Y Axes, Ground ball screws for Z-Axis, All axes ride on extra-large precision profile linear guide ways. -- Boring Unit: 2.2 kW (3 HP) Motor, (12) Independent vertical roto-axial spindles with (8) in X-Axis & (4) in Y-Axis, Maximum spindle speed 8,000 RPM. -- Machining: (1) 15 kW (21 HP) Air-cooled electro spindle with HSK F63 Adaptor, Variable spindle speeds to 24,000 RPM, (1) 14-Position TR side tool changer. -- Operator Interface:Mobile console with Integrated PC “EYE-M"; Industrial PC with 21-1/2" Full HD Multi-touch color touchscreen, WINDOWS Operating system, "MAESTRO SUITE" with Auto-diagnostic to Zooming, Controlled acceleration & deceleration, Encoder feedback, Dynamic tool correction via PLC due to active tool wear using space-and-time criteria, "TECPAD" Remote pendant with 7" Color touchscreen. -- Complete with: PRO-SPACE safety system which allows worktable access to all sides of the machine, (1) 300 m³/Hr. Vacuum pump, Automatic lube system, -- NOTE: Machine was de-installed by a technician and is currently in storage.