Pallet Chief For Sale

Newman 5 Saw KM16 Trimmer. Main Shaft re-bushed 2 years ago. Located in SC. #C978

Used Newman KM-16 sold as is. 4th head pivots for 45 degree cuts.

Used KM-16 sold as is. Qty. 4 heads, ability to cut 16' lumber. No Controls.

NEWMAN 990 Planer-Matcher 16 knife heads 6-roll fabricated frame 12" width capacity 6" thickness capacity Side head servo positioner Top head servo positioner Factory (Newman) conversion electric feed roll drive with 6 individual drive motors and direct coupled PlanetGear speed reducers on each feed roll. (25 HP) 150 HP Top Head 100 HP Bottom Head 75 HP Left Side Head 50 HP Right Side Head Several spare side heads Spare 75 HP left side head motor All standard TEFC motors All air and hydraulic valves are new in 2019 Also includes 2019 Newman pineapple feed table with electric drives 3 each 20 HP direct drives on top feed rolls with PlanetGear Reducers 1 ea 25 HP direct drives on top feed rolls with PlanetGear Reducer Newman bridge with direct drive and PlanetGear Reducer 2019 aux hydraulic pump unit for press roll positioning & pressure bar Omega moisture detection & marking equipment 5-strand deck 16' wide x 11' long with hook stops, with tipple on tail end, with additional short 55-strand integrated into the feed table.

Newman Whitney RH Drop Saw Trimmer

8 Head Drop Saw 40' x 14' 5 Strand lumber Deck (Infeed) 16' x 5' 5 Strand Lumber Deck (Infeed) 16' x 5' High 8 Strand Unscrambler (Infeed) 100' x 24" Scrap Conveyor (Outfeed) Drag Chain Underneath (Outfeed) 24" Roll Case (Outfeed) Electric Disconnects And Controls Optional 4 Strand Roof Top Transfer Optional 82' Of 5 Strand Lumber Dcck

Newman K 2S Double End Trimmer

Newman Whitney KNO 24 trimmer, S/N 24120897, will pass a 5 1/2" cant, (9) station w/ individual motors, built-in wood waste block conveyor, used on dry line, good condition (ref# 200). This machine has just been removed It is setting inside and ready to load on your truck.

Newman KNO 24 lumber trimmer, (9) station drop saw, will pass rail tie’s, includes waste conveyor & infeed this saw is out and ready to load in your truck. Ref #188

Newman KM-16 Overhead 5 Head Trim Saw

K-20 Like New 12’ I, F10’O, F 20’ Waste belt, Soft Start, All Controls

9 Blade station w/ individual motors, built-in powered waste conveyor Working when removed from service in 2018. Removed from service because plant ceased operations.

Newman G-200 Knife grinder

Newman KM-16 | Comes with 2 package infeed decks | 1-unassembled and needs tlc |1-10' wide in operable condition.

Newman KM16 5 Saw Trimmer. 16' Max Length. Located in Alabama. #C982

20’ lengths | All components inspected and replaced as required | Entire shaft was removed, inspected, polished and re-installed. | New roller chain | New lugs | New UHM slides

NEWMAN/Cameron - KF-24: Dip Chain Gang Rip Saw with CAMERON "34H-M1" Infeed SystemSpecifications -- Saw Arbor: 24" Arbor cap.; 14" max. dia. tooling; 4" max. motorized thickness adjustment;22" min. length for glue joint accuracy; 6" throat. -- 2-13/16" Dia. arbor; 24-1/2" capacity saw sleeve arranged for 3-1/8" dia. bore saw blades; saw blade options: 10" - 14" Dia.; spacers: 4-5/8" dia. includes: (1) Saw sleeve and spacers. -- 75 HP - 3,600 RPM TEFC Direct drive motor; arbor with: Disc brake & load meter; arbor lockout on the access door. Feed & Chain: -- 5 HP Variable feed speed: 20 to 100 FPM with: Jam arbor protection. Dip bed carried on: 5" Pitch hardened Double-V chain; hardened dip cams; extruded structural aluminum feed bed slats with: Replaceable steel-backed rubber insert strips; automatic chain oiler with low level shutoff. -- (2) 4" Dia. air loaded overhead pressure rolls; spring-loaded overhead bed plate; pressure rolls & bed plate unit with motorized adjustment; slide type infeed guide with: Handle block; either side of the guide can be used for a stock engraver. -- Anti-kickback finger system with: (1) Lower & (2) upper on infeed; (1) upper kickback on outfeed. Equipped with & Features: Upper outfeed main dust hood: 7-7/8" Dia. 2,150 CFM Infeed dust hood 4-7/8 dia. (855 CFM). (1) Spare sleeve; (2) setup fixtures; generous array of spacers (see photos).

Newnes 3HP HPU

Approx (7) pallet of parts for a 22" Nicholson A7 Debarker from a GP plant.

Nicholson 26" Ring Debarker