Biomass Equipment For Sale

VECOPLAN RG 42-40 SINGLE SHAFT SHREDDERSpecifications; -- 40 HP MotorVecoplan ShredderModel: RG 42/40 XL PVYear: 2007Motor: 40 HP, 460V, 60HZRPM: 1465Feed Opening: 42" x 48"Blades on rotor: 27Weight: 3,700 lbs

Low Noise Grinder with Horizontal Feed; 50 HP Main drive motor, 16" diameter rotor with (24) 40 x 40 cutters; top & bottom knurled infeed rolls control feeding. -- 5" x 18" Infeed opening; 390 RPM rotor speed. -- Includes: (1) 18" Wide x 6" deep x 16' long vibratory horizontal infeed conveyor; sizing screen with 7/16" screen hole. -- Approximately 10,163 hrs on this unit.

2009 Vermeer HG 6000TX -10,341 hours -150k worth of repairs less then 300hours ago -Strong running, good machine -Receipts and list of new parts available for serious buyers only -Parts list -New Infeed conveyor, chain, and roller -New idler roller bearing -New infeed wear strips -New hammer feed drive belts -New anvil bars -New shear edge and cutters -New mill seat new tail belt -New roller lock cylinder and more

2006 Vermeer TG9000 13’ Tub Grinder, Cat 3412E 860hp with 8900 hours, Heads and rebuilt done at 6500 hours. Width 46 ft Width 11.9 ft Height 165 in Weight 106,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2009 Vermeer HG 6000TX Track Horizontal Grinder, with 10,341hours on a Cat C-18, 630HP Engine. $150k worth of repairs less then 300hours ago. Strong running, good machine. Receipts and list of new parts available for serious buyers only. New Infeed conveyor, chain, and roller New idler roller bearing New infeed wear strips New hammer feed drive belts New anvil bars New shear edge and cutters New mill seat new tail belt New roller lock cylinder and more Weight: 75,000 lbs Transport length: Maximum of 37.3 ft Transport width: Maximum of 9.2 ft Transport height: Maximum of 148 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Vermeer HG6000 Horizontal Grinder -4,400 hours -C-18 -Belts good -No blowby Turn Key Unit

2017 Vermeer Tr626 Trommel Screen -2600 hours -Tipping grid -3/8 stainless steel screen mesh Turnkey unit!!!

2004 XL Specialized HG 6000 Vermeer Grinder Has a new end feed. Has less than 6000hrs ran on it. Has new hammers

2020 Vermeer BC1800 XL Chipper, Machine has 2000 Hours, One Owner, Hydraulic Winch, Autofeed System, 173 HP 6 Cylinder Turbo Engine, DEF Engine, Well Maintained Machine Ready for Work. Length: 177” Height: 110” Width: 80” Weight 9,270 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Vermeer TG7000 2100 hours Work ready

Hours-1,677 Serial Number- 1VRC312H8K1001097 Low-hour late model grinder That was used for regrind. The machine is very clean and straight for age and hours. Machine Has Full Factory Warranty Remaining Delivery is available at the buyer’s expense

2012 Vermeer TR626 Wildcat Trommel Screen with 12,500 hours. Weight: 47,500 lbs Width: 102 in (8 ft 6 in) Height: 13 ft 4 in Length: 49 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2009 Vermeer HG6000TX Grinder -10,350 hours -New Infeed conveyor, -New Chain and roller -New idler roller bearing -New infeed wear strips -New hammer feed drive belts -New anvil bars -New shear edge and cutters -New mill seat new tail belt -New roller lock cylinder and more -Over 150k in repairs done about 300 hours ago Have receipts of all work!!!!!!!!

2019 Vermeer TR-5300 Trommel Screen, 2,200 Hours on Engine, New Sprockets and New Drive Chains, In excellent condition. Ready for Work. Weight 32,000 lbs Width (transport): 8.2 ft Length (transport): 39 ft Height (transport): 13.4 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Vermeer HG6000 6400 hours 50 hours on rebuilt motor New belts last year New screen Bought a track grinder and no longer need

2022 Vermeer WC2500TX -300 hours -Tier4f Cummins 600H.P -Microchip and Macro chip Drums available -Dual infeed conveyor Turn key unit !!!!!

2014 Vermeer 2300XL Whole Tree Drum Chipper, C13 Cat 440HP with 4474 hours, Infeed, Remote, Woods Ready. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 Vermeer HG2800 Cat C27 950HP Has Cat Engine Warranty to 6,000 Hours or Approx. 10-31-22 Approx 2600 Hours

Vermeer HG6000 3/4" Square Baffel Screen Only had half a truck load ran through it

2015 Vermeer FT3001358 hours Can run carbide to chipper teeth