Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 188 of 505
10095 Results Found
Sort By 
Call for Price

4' 2 ARM BREAKDOWN HOIST

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$ 9,750

Irvington-Moore 7 strand unscrambler, 75" tall, includes even-end rollers, electric drive, good working condition

Showcase Equipment
260-250-4645
Call

$ 14,300

3 arm tilt hoist, arms made for 48" packs, electric drive, includes 3 strand 11'x 27'6" infeed deck w/ 81x chain very good condition

Showcase Equipment
260-250-4645
Call

Call for Price

Irvington Right Hand Defect Saw

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

Irvington Moore 6' Slide Arm Sticker Stacker w/Electrical

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

Irvington Moore 4' Lumber Stacker

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$ 5,900

IST (Industrial Surface Technologies) - PW 4, ...Industrial Pail Washer.Industrial Pail Washer is designed to wash the interior & exterior of open pails ranging from 1/4 to 5 gallons in size or other types of containers.An optional potholder can be used to hold smaller containers in place during washing. The PW is fully pneumatic, features all explosion proof components, and can be located in Class I, Division I hazardous areas. -- Heavy-Duty PW2 to PW12 solvent washers are made of industrial quality painted steel for durable use and trouble-free. An optional stainless steel finish is available to resist rusting and solvent spillsSpecifications: -- Capacity: (4) x 5 Gallons/19 Liter. -- Pump capacity: 46.2 GPM. -- Air Input: 75-100 PSI. -- Air Consumption: 40 CFM. -- OAL 67" x 45 1/2" x 72 3/8". -- Weight : 650 Lbs.

EX-FACTORY INC.
704-841-2001
Call

$ 14,200

IST (Industrial Surface Technologies) - AW 80, ...Industrial Washer with vibration.ISTpure's Stir Wash Tanks are designed to clean complex parts with an adjustable stirring platform for up to 100 stirrings per minute.Parts washers by stirring are very effective in thoroughly cleaning the surface and interior cavities of parts or batches of parts of any size.Simply load the parts into the tank through the opening in the top, set the cycle time and agitation speed Specifications: -- Tank capacity: 80 gallons -- Stirring System: Self-cleaning stirring platform with top loading that facilitates loading/unloading operations -- Adjustable Stirring Speed: Ranges from 0 to 100 stirrings per minute -- Pneumatic System: Operates at 120 psi pressure -- Inner tub made entirely of stainless steel components -- Included Attachment: Hand Wash Brush with Continuous Flow -- Standard Pump: Electric Motor -- Fluid Capacity 80 gallons -- Fluid Level 12" 17 1/2" -- Load Capacity 250 lbs 750 lbs --Overall Dimensions (D x W x H) 33" x 51 1/2" x 66 1/2" -- Interior Dimensions (D x W x H) 27 1/4" x 44 1/2" x 28" -- Tub Dimensions (D x W) 17 1/2" x 41 1/2" 27 3/4" X 54" -- Shipping Weight 556 lbs -- Compressed air required 8 cfm@ 120 p

EX-FACTORY INC.
704-841-2001
Call

$ 19,900

ITALPRESSE R4/130 Top Glue Spreader with 51" working width, -- max. 4" opening, 9" dia. grooved at 13 grooves per inch rubber spreading rolls, -- Rubberized doctor roll 7" diameter -- 65 FPM feed speed, 0.5 HP feed drive.

Torry Hiddema
800-374-5009 ext:371
Call

$ 23,500

ITALPRESSE R4/160 Top & Bottom Glue Spreader Specifications: -- 63" working width, max. 3.5" opening, 7-1/4" dia. grooved rubber spreading rolls, -- 65 FPM feed speed, 0.5 HP feed drive.Also included: -- 1 New set of glue roller top/bottom.

Torry Hiddema
800-374-5009 ext:371
Call

Call for Price

Italpress Matrix membrane-less press. See photos for specifications. Heating platen dimensions................................ 1,450 x 2,800 mm (57" x 110") Maximum useful lamination area........................1,250 x 2,600 mm (49" x 102") Maximum work piece thickness ......................... 43 mm (1.7") PVC foil width...................................................... 1,420 -1,450 mm (55.9" - 57") Maximum laminating pressure..............................200 metric tons (220 US tons) Maximum platen temperature................................ 150° C (302° F)

Carolina Machinery Sales, Inc
704-288-1904
Call

$ 32,500

ITALPRESSE XL/6 30-13 120T Veneer Hot Press:Platen dimension: 3,000 mm x 1,300 mm (118" x 51"); Design allows loading from all (4) sides. -- 350 mm (13.8") Max. single daylight opening with infinitely variable stroke adjustment. -- (6) Hydraulic 85 mm dia. Chromium Plated upstroke cylinders. -- 120 Metric tons total pressure; 2,2 kW (3 HP) Hydraulic pump motor, dual stage & speed w/automatic pressure re-adjustment. -- Features a rack & pinion guide system made of self-lubricating material insures parallel closing of the platens. Equipped with: -- Patented, electrically heated platens w/automatic temperature adjustment; integrated electric heating system can heat up to 120°C max. platen temperature. Operating temperature 90°C. Power requirement 19 kW (25 HP). -- Manual open & close or automatic open with adjustable cycle timer. -- Perimeter safety stop wire on all (4) sides of press, and safety lockout for maintenance; safety circuit with two-hand operation. -- Construction: Heavy I-beam, welded steel frame; cylinders have chromium plated steel pistons with Teflon bronze guides in cylinder.

Torry Hiddema
800-374-5009 ext:371
Call

Call for Price

ITALPRESSE SP/1-A SPECIAL CASE CLAMP (AUTOMATIC FEED THROUGH): -- Specifications:Case goods capacity: 92" (2,340 mm) max. & 12" (300 mm) min. length; 48" (1,220 mm) max. & 10" (250 mm) min. height, 27.5" (700 mm) max. width. -- 10' (3,500 mm) Infeed belt conveyor, 14' (4,267 mm) overall belt length inside clamp & infeed, standard belt width 27.5" (700 mm); Feed speed 53 FPM with 0.5 HP drive. -- Complete automatic reading of the case size, fast approach action to reduce clamp cycle, (1) scissor on top & (1) scissor on each end close & clamp the case. -- Hydraulic actuated scissors with adjustable pressure up to 5,000 lbs, 3 KW hydraulic pump motor. -- Bottom & lateral intermediate locating bars from the top with pneumatic squaring; Intermediate side bars have electronic height positioning and are covered with PVC to prevent unwanted scratches. -- Clamp cycle is automatic with choice of three cycles (Manual, Semi-Auto & Automatic). Safety grid from rear and (6) electronic eyes from the front.

Bob Bullin
800-374-5009 ext:346
Call

Call for Price

ITW Muller Stretch wrapping packaging system, 120 volt 3 post overhead Rotary arm stretch wrapper Model# Cobra 500 Allen-Bradley Panel View 300 Micro touch screen Video of wrapper operating is available Packaging and loading is included in price 120 volt, single phase Serial# E1510406 13 amps/ 1.8 KVA/ 60Hz.

 Toledo, WA
Machinery Scene
360-864-2800
Call

$ 7,900

IVISION VCE 1570 Industrial Vacuum Chip CollectorThe VCE 1570 is ideal for Double Head Saws or Miter Saws with (2) outlets.Features: -- The excellence of design and construction technique creates extremely handling-friendly and virtually maintenance-free units with innovative technical solutions to get the best possible performances. -- The sturdy material used and the simple design are additional characteristics, specially designed for industrial purposes, and is equipped with a powerful motor and a state-of-the-art filtering system. -- ideal for heavy dust or collection of steel, aluminum, and or any metal chips, including plastics, fiberglass, PVC.Specifications: -- Power: 2.7 HP -- Max flow rate: 2,400 CFM -- Inlet size: 4" or 6.2" or a 4" + 6.2", number (2). -- Tank Volume: 42.27 Gallons

Bernie Straple
800-374-5009 ext:339
Call

$ 49,500

2003 J&J Live Bottom Trailer 2 available Good shape

Mitch Stevens
828-773-6986
Call

Call for Price

J & P MACHINES - 6V2HD2GC: Boring Machiner (Feed Through, Drawer Parts) -- SpecificationsDrawer part Boring Machine is ideal for small to medium size production: Drills approx. 15 parts/minute; 12" min. working length; 28" max. working length; 2" min. working width; 28" max. working width; hopper loading/belt feeding magazine for automatic (1-man) operation. -- (2) Horizontal boring units with: 5-Spindle drilling chucks on 32 mm centers; ea. with 2 HP - 3,600 RPM motors; (3) vertical boring units with: 5-Spindle drilling chucks on 32 mm centers; ea. with 2 HP - 3,600 RPM motors. -- Drilling heads travel on linear guides with: Manual digital counter adjustments;, manual digital counter boring depth adjustment; PLC control for cycle functions of the machine. -- Machine requires 100 PSI Air pressure; dimensions are approx. 55" long x 34" wide x 58" high; weight is approx. 1,300 Lbs.

EX-FACTORY INC.
704-841-2001
Call

$ 12,900

J & P MACHINE 4 RSDC Pocket Hole Boring Machine TroughfeedThe pocket hole grooving and boring machine is ideal for making frames in kitchen, furniture and similar industries.The loading hopper magazine holds 25 pieces of 3/4″ thick material.This machine operates automatically by feeding, stopping, clamping, grooving and boring the material in one continuous operation.Specifications: -- Fast setup for grooving and boring with precision mechanical indicators to the accuracy of 1/10 mm. -- (4) high frequency router heads with drilling -- Closes to a minimum of 7″ --Opens to a maximum of 48″ --Minimum width 1½"; --Maximum width 6″ -- One or two grooves per side can be selected -- High-frequency motors with ½"; collets, adjustable from 12,000-18,000 rpm with electronic inverter -- PLC controls -- Precision linear bearings in open and closing base -- Produces approximately 10 – 15 pieces per minute -- Requires one operator -- 440 volts 3 phase -- 90 psi air required -- Dust collector hoods -- Dimensions 90″ long x 36″ wide x 55″ high -- Weight approx. 2000 lbs Also included: -- Dust hood (spider type)

EX-FACTORY INC.
704-841-2001
Call

$ 65,000

NEW BAR SAW / GRAPPLE FELLING HEAD - COMES WITH COMPLETE SPARE PARTS KIT

Forestry First
855-588-7871 ext:1
Call

Call for Price

Jackson Shaving Mill 6 Ft Box Foley Knife Grinder 22' Log Deck Conveyor

Carolina Machinery Sales, Inc
704-288-1904
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved