Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 128 of 502
10039 Results Found
Sort By 
Call for Price

Dynamic Fan with 33" Opening

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

DYNAPAC CA1500D Smooth Drum CompactorSpecifications: -- Smooth Drum: 66" -- Engine: 55 kW 75 HP @ 2200 RPM -- Operating mass (incl. ROPS) 15,500 lbs -- Operating mass (incl. Cab) 15,900 lbs -- Module mass (front/rear) 7,750 lbs/ 7,750 lbs -- Max. operating mass 18,700 lbs -- Fuel tank capacity: 50 gal -- Speed range: 8 / 12 / 12 km/hEquipped with: -- Seismic -- Hydrostatic hydraulic systems

EX-FACTORY INC.
704-841-2001
Call

$ 59,500

Single Drum, Vibratory

 HOUSTON, TX
Doggett Machinery
225-306-7028
Call

Call for Price

Line Shaft Ready Triple Combination Table Saw/Band Saw/Router all in one.

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

Eagle Beaver 16' Tandem axle Dove Tail with Pintle Hitch

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$ 45,000

50 Ton Low Boy

 Southern, IL
Carolina Used Machinery
828-773-2204
Call

$ 35,900

97 Eager Beaver 55 Ton Detachable Tri axle with outriggers All cylinders replaced in the last year 50% average on 12 tires Includes 3 spare tires also about 50% 24' x102" well 14' x102" ramp and over axle platform Road ready Retiring

Mitch Stevens
828-773-6986
Call

$ 2,500

BROKEN AIR BRAKE LINE DROP DOWN RAMPS DUAL AXLE EAGER BEAVER 10-85 TRAILER SOLD AS IS WOOD DECK

 MILFORD, MA
Milton CAT
888-626-2715
Call

Call for Price

Maximum Assembled Product Size: 37.5” x 98” Minimum Assembled Product Size: 11.375” (vertical) x 9.75” (horizontal) with spacer blocks 7.5” (vertical) x 5.5” (horizontal) Maximum Framing Width: 4” Minimum Framing Width: 1.5” Tubular Steel Frame THK Linear Bearings and Rails (1) Allen Bradley Compact Logix PAC (4) Allen Bradley Kinetix Servos and Drives a. (1) Vertical Beam b. (1) Horizontal Beam (2) On the Upper Right Hand Clamp to ensure that uniform pressure can be applied regardless of the cut accuracy of the frame parts (1) Hoffman Upright Enclosure Allen Bradley Control Components (Push Buttons, Relays, Power Supplies, Buzzer, etc.) (1) Hoffman Air Conditioner for Electrical Enclosure EMS Press Control/Server Communication Software Package (4) Tregarne Woodwelder with Production Gun

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Eagle 4 Stringer Pallet Nailing Machine 36'x 36" To 48"x 48". Polar Air 20HP Air Compressor w/ Matching Dryer & 2 Air Reciever Tanks.

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$ 399

Eagle Claw saw bits, 9/32", these are comparable to the Simonds dominator, call if you have any questions

Showcase Equipment
260-250-4645
Call

$ 12,500

ZERO SALES TAX FOR OUT OF STATE SALES! ZERO DEALERSHIP FEES! ZERO NONSENSE! ULTRA LOW RATE IN HOUSE FINANCING FOR BUSINESS AND INDIVIDUALS! Fully custom enclosed trailer with two rows of floor hook ups and one row of wall hook ups on each side. Air unit and RV hook ups.

 Bardstown, KY
Team Boone
502-744-5655
Call

Call for Price

Eagle Machinery Infeed Deck: Chain driven, approx 12" wide x 195" long Eagle tilt hoist table

Carolina Machinery Sales, Inc
704-288-1904
Call

$ 125,000

Eagle’s Pack 720 PRO delivers superior contaminant detection of large packaged products at high-line speeds. It has a detection coverage of 720 mm (28.3";) at the belt and is capable of high-speed imaging up to 76 meters per minute (250 FPM). With the use of a bar code reader, the x-ray machine can run mixed cases for complete inspection. It is also capable of multilane inspection which enables manufacturers to inspect multiple lanes of the same or dissimilar products, or alternatively use one lane for production and the other for rework. The Pack 720 PRO is simultaneously capable of performing following inline quality control checks: Contaminant detection Mass measurement Package integrity Component countTechnical Specifications:(27.9″) wide at the belt, 375 mm (14.7″) wide at the top of aperture; 381 mm (15″) overall height --15″ TFT color touch screen; Windows 10 Enterprise LTSB with Eagle SimulTask™ 4 PRO Control & Imaging Software; TeamViewer™ service tool for remote machine diagnostics & product set-up services --762 mm (30″) wide belt by 1829 mm (72″) long with no reject; 2743 mm (108″) long with 1 reject -- XRAY Power Single vertical beam; 140W (140kV, 1mA); 420W (140kV, 3mA); 420W (84kV, 5mA)

Mark Joel
800-374-5009 ext:355
Call

Call for Price

EARTH CARE PRODUCTS, INC. 10½ Ft. x 32 Ft. Triple-pass Rotary Drum Dryer System with Gas Burner;Complete with the following major components: -- 10.5 Ft. x 32 Ft. (despite the model DB-1030) Triple-pass Insulated drum. -- Trunnion Bases, and 30 HP Drum Drive. -- High efficiency Cyclone, Cyclone outlet Airlock. -- 100 HP Dryer Main Fan, and Ducting. -- 25 MM BTU Gas Burner complete with Refractory Lined Furnace and Gas Train. Notes: &#9679 The Trunnion Tracks and Trunnion Wheels are in good condition as is the drum interior. The system was renovated in 2015 and not used much after the work was done. &#9679 The equipment is still in-place.

Bob Bullin
800-374-5009 ext:346
Call

Call for Price

large Eastey heat shrink tunnel Eastey ET 22-20-MBV2 heat tunnel, inside chamber size 24 wide cx 20” tall 220 volt, 3 phase, 50 amps, Year: April 2012 Model ET 2 (z?) 120-MBV2 Serial# ET242052120402, weight 1,000 lbs, Approximate measures: 26” wide x 20 ½” tall, wire belt measures 23 ½” wide, Can provide test run video under power. No charge for crating item Call for a delivered price to your location

 Toledo, WA
Machinery Scene
360-864-2800
Call

$ 5,350

The Ultra log splitter is perfect for those who are looking for a reliable and high-performance machine that won't break the bank. With its low cost of ownership and low maintenance requirements compared to kinetic splitters, the Ultra is a great investment for any home or professional user. Its tried and true design ensures that it will last for many years to come, and its powerful performance makes it the perfect choice for even the toughest resplits. 14hp Vanguard Engine 16gpm Pump 4 Way Wedge Standard Auto Retract 4 Second Cycle Time 20 Gallon Hydraulic Tank Weight 800lbs

 Perth, ON
Eastonmade Wood Splitters
613-812-3213
Call

$ 3,675

The Eastonmade SS424 is meant to bust down those large chucks for boiler wood or further processing. It makes moving blocks easy and it can all be done from the comfort of your skid steer. Its not near as heavy as the SS524 making it a better choice for smaller skid steers. The cylinder also offers a faster cycle. -Weight 1000LBS -Required Pump Pressure 2200PSI-3000PSI -Required Flow 13GPM-30GPM -Floating Wedge -4 Way Wedge

 Perth, ON
Eastonmade Wood Splitters
613-812-3213
Call

$ 4,830

The Eastonmade SS524 is the meanest skid steer splitter you're going to find in the industry. This is specifically designed for tree services and people that deal with oversized gnarly wood all of the time. These compliment any firewood operation as it takes a typical waste product that is almost unmanageable and moves and breaks them down for further processing. -Weight 1500LBS -Required Pump Pressure 2200PSI-3000PSI -Required Flow 13GPM-30GPM -This is a heavy splitter. We recommend a minimum of 60hp skid steer with an operating capacity of 2500lbs. -4 Way Wedge

 Perth, ON
Eastonmade Wood Splitters
613-812-3213
Call

$ 10,200

The STK 16 Firewood Conveyor is the perfect tool for anyone whose livelihood or personal enjoyment requires large-scale wood movement. This 16-foot machine features a 10-foot loading height and is constructed with heavy-duty 1/8" plate for exceptional durability. The double chain drive provides a secure, consistent transfer of wood, guaranteeing efficient use of your time and resources. $2000 USD Flat rate shipping within the continental USA and Canada -16' Overall length -10' Loading Height -6.5 HP Powerpack -NO CHIP SEPARATOR AVAILABLE

 Perth, ON
Eastonmade Wood Splitters
613-812-3213
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved