Mellott For Sale

BUSELLATO JET 4002 XL CNC MACHINING CENTER (W/ATC/BORING): -- Specifications: Working Field "X" Axis of 168.1" (4,270 mm); "Y" axis of 47.2" (1,200 mm); "Z" axis stroke 9.8" (250 mm); 6.8" (175 mm) max. material thickness. -- Positioning Speed:"X" Axis at 230 FPM (70 MPM); "Y" axis at 197 FPM (60 MPM); "Z" axis 49 FPM (15 MPM). -- Worktable:(8) Pneumatic locking panel supports, (3) vacuum pods per support.(8) Pneumatic backstops, (2) pneumatic side stops & (2) pneumatic central stops.(4) Independent working zones; jig locking device on (2) work areas. -- Boring Head:(1) 4 HP (3 kW) Motor - 4,000 RPM; (20) vertical spindles with: (12) Spindles in "X" axis & (8) spindles in "Y" axis. -- Machining:(1) Vertically mounted 10 HP (7.5 kW) electro spindle with: ISO-30 Adaptor (0 - 18,000 RPM) with RH or LH rotation; (1) 6-position automatic tool changer.(1) Additional 5 HP (3.8 kW) vertical router; routers are driven by an 11 kW Digital Inverter -- Operator & Machine Control:PC Front-End with: "GENESIS EVOLUTION" 2.2.1 + Windows "NT" Operating System; 15" color monitor; 1.44 MB floppy & 32X CD ROM drives; 8.4 GB hard disk; 64 MB RAM; (2) RS 232 serial ports; integrated modem; Ethernet card, all built into a protective cabinet enclosure.GENESIS Software is continuously online providing real-time information on tool position & error messages, visualization of RPM, current load meter, and more; positioning of panel supports and vacuum cups.Software features: Automatic generation of G & M code, stop & restart, machine diagnostics, automatic optimization, and full graphic display with the possibility to associate up to (11) parameters and programming of up to (2,000) work lines per single program. -- Complete with:Front safety mats that will instantly place machine in "Pause Cycle" when operator steps onto the mats. Safety Perimeter Fencing. Transformer for 480 V. -- Actual Model is: Busellato Jet 4002 XL.

Busellato Jet 200 RT 5'x12' Table Offload table

Busellato Jet 100 CNC Router 4' x 9' Table 10 HP Spindle Boring Block: (7)X, (5)Y 20 HP Vacuum Pump Custom built offload table 240 V/3PH

Busellato V-Tech CNC Router 400 Volt/50-60 HZ MFG Specs (to be confirmed): BUSELLATO V-TECH Vertical CNC Machining Center with ATC: Working Field "X" Axis 120" (3,050 mm), "Y" axis 51.1" (1,300 mm), Z-axis 70 mm (2.8"). Positioning Speed: "X" axis is 197 FPM (60 MPM), "Y" axis 164 FPM 50 MPM), "Z axis 33 FPM (10 MPM). Worktable Bored "Phenolic table with (10) adjustable vacuum pods; (6) Pneumati

BUSELLATO JET 100 CNC MACHINING CENTER (W/ATC/BORING): -- Specifications:Working field: "X" Axis 120" (3,048 mm); "Y" axis 49" (1,244 mm); "Z" axis 3.9" (100 mm). -- Positioning Speed:"X & Y" Axes 328 FPM (100 MPM) each; "Z" axis 98 FPM (30 MPM); sll units ride on precision guides & ways."X" Axis uses a helical rack-and-pinion system; "Y & Z" axes use ball screws; all axes are driven by digital, brushless AC Servo motors. -- Worktable:(6) Panel supports with: (4) Lifting bars & digital readouts for manual rail & pod locations according to the program. (4) Vacuum pods per support rail; (2) independent working areas. -- Boring Unit:TF 20 Boring head with (14) vertical spindles: (8) Spindles in "X" axis & (6) spindles in "Y" axis.(4) Horizontal spindles with: (1 + 1) in "X" & (1 + 1) in "Y"; (1) "X" axis grooving saw for max 120 mm blade. -- Machining:(1) ISO-30 Spindle(1) 15-Position ATC tool changer mounted at the rear of the machine. -- Operator & Machine Control:PC-Based control with "GENESIS" + Windows "2000" Operating System.Includes Color CRT monitor, full keyboard & mouse; 256 MB RAM, 10 GB hard disk, CD ROM (52X), 1.44 MB floppy drive; (4) serial ports, (1) parallel port, (2) USB ports. "GENESIS" Operating System with: Large onboard program storage, ethernet connection, specific function controls, and internet troubleshooting capabilities. -- Complete with:(1) 100 m³/Hr Vacuum Pump, Bar Code Scanner, Belt Conveyor for scrap removal. -- Actual Model is BUSELLATO JET 100

Chipmaster 6-knife Chipper, Model 48 s/n 66262, No Drive

Chipper. This machine is a Bush 66", 6K chipper. Item #00678

Bush 48" 3 Knife with 150HP Electric Motor

36" Drop Feed Bottom Discharge Chipper C/W 50 HP Electrical Motor Needs Throat

Bush Chip Master 48" 3K Chipper S/N 74-05-17

Bush Chip Master 60" 3 Knife Chipper with 100 HP Motor, Serial# 73-04-18

Bush Chip Master 48" 6 Knife Chipper Converted to a Bottom Discharge.

Buss No. 55 Planer

BUSS 4' lumber package maker. System consists of: 4 strand infeed package deck, with reversing Tulsa drive; 4' tilt hoist with Tulsa drive; 3 decks to feed 4' stacker, with drives; 4' twist arm BUSS package maker with chain type package arms onto 3 strand outfeed package deck. System is old but in good shape. Will require removal and loading from buyer. A little oil and elbow grease will make this system worth owning. Offered as-is/where-is (Central VA) with no warranties or guaranties and subject to prior sale. Price $17,000.

BUSS M 4L 30" STRAIGHT KNIFE PLANER30" X 8" Cap., 20 HP direct drive top motor, 1.5 - 2 HP for dual feed speed, 4-knife round top cutterhead, sectional infeed rolls and chipbreaker. Complete with: Shaving hood, magnetic starters.

BUSS - DL 30" x 8", ...Heavy-Duty Wood Planer with GrinderModel "DL" bed capacity: 30" W x 65" L x 8" H,Specifications -- (2) Large steel support rollers on bed; upper area: (1) Steel roller. -- (1) Cutterhead with: (4) Knives; (1) grip through roller. -- Heavy-Duty spring tension adjustment on top of machine. -- (2) 15 HP - 3 PH motors; one connected to 20-ratio gear reducer, variable feed speed drive; the other connected to the cutterhead system. -- Upper cross frame attachment for Knife Grinder System (comes with the Grinder).Equipped with & Features -- Oil cup & grease fitting lube system. -- Power raising and lowering of the Planer bed.

Bütfering SWT 124 RC Wide Belt Sander (2) Heads43" Width cap. Drum, Combination HeadBütfering SWT 124 RL Features: --Touch Screen display and control. -- Capacity of (125) programs. -- Conveyor speed is controlled within the program. -- Controls the number of sanding heads activated. -- Controls use of sanding pad or contact roller on combination heads. -- Controls thickness of work piece. -- Controls air jet belt cleaning on or off ( only on models with this feature). -- Error message display including safety functions. -- Displays in mm or decimal inches. -- Hour meter display. -- Conveyor table mounted on four heavy duty jack screws. -- Automatic conveyor belt tracking. -- Electronic belt oscillation system. -- Electronic motor braking system. -- Over thickness protection system. -- Safety interlocks on all access doors. -- In feed roller table. -- Emergency stops at in feed and out-feed locations.Head Configuration:1st Head: Contact roller head located in position #1 includes:160 mm diameter steel profile contact roller. -- Automatic height positioning -- Grit compensation -- 20 HP motor -- Cutting speed is 60 FPS.2nd Head: Combination head located in position #2 includes: -- 65 shore profiled rubber contact drum --Automatic height positioning -- Air cushion sanding pad with rise and fall timing -- 18 HP motor -- Cutting speed is 60 FPSSpecifications: -- Working width 1,100 mm (43";) -- Abrasive Belt width 1120 mm (44";) -- Abrasive Belt length 1,900 mm (75";) -- Work piece thickness min. 3 mm ( 1/8"; ) -- Work piece thickness max. 160 mm (6-3/8";) -- Variable conveyor speed 8 - 42 FPM; Feed motor 1 HP -- Contact Roller - Head #1 20 HP, 60 FPS belt speed. -- Combination- Head #2 18 HP, 60 FPS belt speed.Utilities: -- Total power required 28 kW. -- Dust collection requirements 1500 CFM; -- Dust outlet – head #1 160 mm ( 6.25 "; ) -- Dust outlet – head #2 160 mm ( 6.25 "; ). -- Compressed air requirements 90 PSI; Air consumption per cycle 4 CFM; Machine net weight 3960 Lbs.

BÜTFERING SWT 335-RLL 3-Head Wide Belt Sander,53" Width cap. Drum, Drum, Combination HeadHead Configuration1st Head: Steel Profiled Contact Roller 21.5 KW (28.83 HP)2nd Head: Rubber Profiled Contact Roller 17.4 KW (23.37 HP)3rd Head: Combination Head: Contact Roller & Air Cushion Sanding Pad/Platen Head 17.4 KW (23.37 HP)4th station: Panel Cleaning BrushSpecifications -- 1st Head: Steel contact roll, 240 mm (9-1/2") dia., abrasive belt speed 18 m/sec (59 FPS), driven by 22 kW (30 HP) motor. -- 2nd Head: Rubber covered contact roll, 65 Shore hardness, 240 mm (9-1/2") dia., abrasive belt speed 18 m/sec (59 FPS), driven by 15 kW (20 HP) motor. -- 3rd Head: Combination head consisting of Contact roller 55 Shore hardness, 140 mm (5,5") dia. and Air cushioned polishing platen with jump control for leading & trailing edges. Abrasive belt speed 12 MPS (39 FPM), driven by 15 kW (20 HP) motor. -- Outfeed rotary panel cleaning brush. -- All heads use 1,400 x 2,620 mm (54" x 103") abrasive belts. Electronic abrasive belt tracking. Air jet abrasive belt cleaner on head # 2.Feed system: -- Conveyor belt feed with variable feed speed from 2,5 - 13 m/min (8 - 42 FPM). -- Vacuum table with internal suction fan and motor 5,5 kW (7,5 HP). -- Part thickness 3 - 160 mm (1.2" - 6.3").Equipped with & Features -- Motorized thickness adjustment with LED readout. -- Constant pass line of conveyor bed 900 mm (35"). -- Automatic electronic conveyor belt tracking, in & outfeed spring loaded rubberized hold-down rolls. -- Automatic part thickness setting. Complete with: -- Infeed panel "over-thickness" sensor, in & outfeed emergency stops, safety interlocks on all doors. --Telescopic infeed roller conveyor extension, fold away outfeed table 900 mm (35"). -- Motor load meters, and main motor electronic brakes. -- Operator panel with joystick and multi-function readout for thickness, feed speed etc.Full Load Amps: 150 FLA at 460 VoltsCompressed Air: 55 cfm @ 90 PSI RequiredTotal CFM Required 5,365Actual model is BÜTFERING SWT 335-RLL 3-Head Wide Belt Sander

BÜTFERING SGO 211 RK Wide Belt Sander, 2-Head,(43") Working width, equipped with (1) Contact Roller and (1) Combination Head consisting of Contact Roller & Finishing Platen.Head Configuration;1st Head: Rubber contact roller 160 mm (6.3") with 15 kW (20 HP) motor.2nd Head: Combination head with rubber covered contact roller and finishing platen, not segmented, 11 kW (15 HP) motor.Specifications: -- Both heads use 1,120 x 1,900 mm (43" x 75") abrasive belts with electronic abrasive belt tracking. -- Feed system: Conveyor belt feed with variable feed speed 2,6 - 13 m/min (8,5 - 42 FPM), 1,1 kW (1.5 HP) feed drive, auto belt tracking. Part thickness 3 - 160 mm (0.1 - 6.3"). Automatic motorized part thickness adjustment with 0,1 mm LED readout.Equipped with and Features -- Electronic emergency brakes on sanding head motors. -- Infeed emergency stop. -- Motor load meters for supervision of stock removal. -- Roller table extension at infeed. -- Emergency stops at in & outfeed end—automatic star/delta starters.

Butfering 2-Head 53" Wide Belt Sander