Mellott For Sale

WEEKE - ABD 050/28: CNC Bore, Glue, & Dowel Inserter -- SpecificationsDesigned for small or large capacity horizontal drilling, gluing and dowel insertion; built on Heavy-Duty welded steel base; main horizontal beams hold the carriage for the boring head and glue/water injector.Support Table with: Left & right side stop & rear stop bar; center stop pneumatically activated.(8) Clamping cylinders; manually adjustable; automatic central lubrication. -- Working Capacity. Material size from: 20 mm - 2,800 mm (0.78" - 110.2") long; 100 mm - 800 mm (3.9" - 31-1/2") wide; 10 mm - 80 mm (0.4" - 3-1/2") thick.Machine is set up for: 8 mm Dia. x 30 mm or 35 mm long dowels (additional dowel sizes are optional). -- Horizontal Drilling & Dowelling Aggregate with: (1) Individual spindle; (1) glue & dowel injector with glue flow control; (1) vibrating hopper dowel feeder. -- (2) Separate Stations process: (2) Parts independently on the left-hand or right-hand stops or (1) large piece as required with no additional setup; work can be loaded in: (1) Field while it is being machined in the other to allow fast production of varying parts. -- Operator Interface Power Control PC Front-End with: Microsoft Windows based control + WEEKE "PC85T" + "WoodWOP" Operating System with Graphic programming & error messaging.17" TFT Flat screen monitor: CD-RW Drive, 1.44 MB floppy drive; standard keyboard & mouse.Software allows program design with: Automatic mirror image by use of an active center stop located 1,380 mm (54.3") from zero. -- Includes: All manuals, documentation, and program disk provided with machine.

WEEKE - ABD 260: CNC Bore Glue & Inserter -- SpecificationsDesigned for small or large capacity horizontal drilling, gluing and dowel insertion; built on Heavy-Duty welded steel base; main horizontal beams hold the carriage for the boring head and glue/water injector.Support Table with: Left & right side stop & rear stop bar; center stop pneumatically activated.(8) Clamping cylinders; manually adjustable; automatic central lubrication. -- Working Capacity. Material size from: 20 mm - 2,800 mm (3/4" - 110-1/4") long; 100 mm - 800 mm (3.9" - 31-1/2") wide; 10 mm - 80 mm (0.4" - 3-1/2") thick.Machine is set up for 8 mm Dia. x 30 mm or 35 mm long dowels (additional dowel sizes are optional). -- Horizontal Drilling and Dowelling Aggregate with: (3) Individual spindles on 32 mm centers; (1) glue & dowel injector with glue flow control; (1) vibrating hopper dowel feeder. -- Vertical 3-Spindle Drilling Unit with: (3) Individual selectable spindles at: 32 mm Spacing; adjustable in "Y" direction from 0 - 50 mm; min. workpiece width: 100 mm. -- (2) Separate Stations process: (2) Parts independently on the left-hand or right-hand stops or (1) large piece as required with no additional setup; work can be loaded in: (1) Field while it is being machined in the other to allow fast production of varying parts. -- Operator Interface Power Control PC Front-End with: Microsoft Windows based control + WEEKE "PC85T" + "WoodWOP" Operating System with Graphic programming & error messaging.17" TFT Flat screen monitor: CD-RW Drive, 1.44 MB floppy drive; standard keyboard & mouse.Software allows program design with: Automatic mirror image by use of an active center stop located 1,380 mm (54.3") from zero. -- Includes: All manuals, documentation, and program disk provided with machine.

WEG Motor, 100hp, 1790/1490 Rpm, 230/400, 200/400,405T Frame

WEG GPH2100QC4000 Soft Start, 100 hp , SSW07 type Soft Start, To be Cut 6" Above and Below (3) Available

WEG GPH2030QC4000 Soft Start, 15hp, SSW07 Type

250HP, 460VOLT, 1800RPM, EITHER 447T or 445T FRAME, TEFC, INVERTER DUTY, PREMIUM ENERGY EFFICIENT. This motor never ran on the equipment that it was mounded too.

NEW WEG soft starters, open style (for your enclosure), 460 volt. Many options available.  Pricing Examples: 200 hp (255 amps) $2,065; 100 hp (130 amps) $ 1,140; 300 hp ( 365 amps) $ 2,380. Call for pricing for options and different HP's than above. 

WEG Soft Start, SSW07 type Soft Start, To be cut 6" above and below

WEG WWE-361-BP Starter, 250 hp, To be cut 6" of motor (2) Available

WEG GPH2075QC4000 Soft Start, 75 hp, SSW07 type Soft Start, To be cut 6" above and below.

Weight-Tronix DSL4848-05 48x48 5000lb Capacity Scale

WEIL-MCLAIN, MODEL 988, steam or hot water boiler. Used in school system approximately 7 years. Good condition. Price includes:  7 sections of cast-iron plates and enclosure with controls. #2 fuel oil fired burner. Technician who removed system and put in a different system available to discuss.  Offered as-is, as removed from service. Price $8,500.00 OBO

one owner machine, 426 delimber, pitts hydraulic trailer, full service, 5055 grapple, new seals through out. nice work ready machine!

2020 Weiler Skidder, 5,000 hours. $125,000 740-534-8638

2021 Weiler S250 Log Skidder, Dual Arch Grapple, Winch, Low Hours,

35.5 tires, winch, 16.6’ grapple, serviced and ready to work.

2023 Weiler 357 Feller Buncher, Equipped with 22" Hot Saw, Fire Suppression, Extra Saw Teeth, Undercarriage 95%, Enclosed Cab with Heat , Air Conditioning Custom Seat, ONLY 400 Hours, Ready for the Woods. Length 30 ft 0 in Width 10 ft 5 in Height 11 ft 5 in Weight 59,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Quadco 24C360HT

2021 Weiler k560 loader -8300 hours -‘21 Pitts Hydraulic Trailer with a Weiler 426 Delimber -Loader has been Deleted -4.4 cat motor -Tight and dry -For additional $15,000 has a 2023 4400 sawbuck to go with it

WEIMA TH 1500 M Briquette Press (Square Brick) -- Specifications: Produces 5.9" x 2.3" (150 x 60 mm) rectangular briquette; hopper opening of 55" x 55" (1,400 x 1,400 mm); hopper volume of 2.46 cu/yd (1.88 cbm). -- Equipped with: 40 HP Hydraulic motor; 2.6 HP auger motor; 3.0 HP agitator motor; hydraulic oil volume of 264 gallons (1,000 liters). -- Volume reduction from chip/dust to block up at a 10:1 ratio; hourly output up to 800 - 900 Lbs. -- Features: Conical shaped agitator with curved hopper corners, "Bridge Breaker" mounted on agitator; automatic "On/Off" integrated in feeding hopper; hydraulic oil cooling, overheating protection for hydraulic oil. -- Complete with: Touch-Screen control panel on swivel mount; discharge ramp for briquette extraction, chrome plated clamp, and an oil level switch. -- Solid German engineering.