Mellott For Sale
.gif)
3616 Results Found
Call for Price
WEG GPH2100QC4000 Soft Start, 100 hp , SSW07 type Soft Start, To be Cut 6" Above and Below (3) Available
Call for Price
WEG GPH2030QC4000 Soft Start, 15hp, SSW07 Type
Call for Price
WEG WWE-361-BP Starter, 250 hp, To be cut 6" of motor (2) Available
Call for Price
WEG GPH2075QC4000 Soft Start, 75 hp, SSW07 type Soft Start, To be cut 6" above and below.
Call for Price
NEW WEG soft starters, open style (for your enclosure), 460 volt. Many options available. Pricing Examples: 200 hp (255 amps) $2,065; 100 hp (130 amps) $ 1,140; 300 hp ( 365 amps) $ 2,380. Call for pricing for options and different HP's than above.
$ 8,500
.jpg?width=300&height=200&mode=pad)
WEIL-MCLAIN, MODEL 988, steam or hot water boiler. Used in school system approximately 7 years. Good condition. Price includes: 7 sections of cast-iron plates and enclosure with controls. #2 fuel oil fired burner. Technician who removed system and put in a different system available to discuss. Offered as-is, as removed from service. Price $8,500.00 OBO
Call for Price
Weima WLB 1300 Horizontal Grinder 50 HP Motor System works, not currently in use, will need main bearing replaced.
2020 Weima WLH 600 Grinder 50 HP motor Vibrating Infeed
2008 Weima WL 6/18.5 V-Rotor Drop Feed Wood Grinder Machine number 500-8876 460V 3 Phase 60 Hz Motor Output- main drive 18.5 KW 1760 rpm Motor Output- hydraulic system 1.5/2.0 KW 21 tools Rotor speed ca.90 Rotor diameter 252 mm Includes spare rotor
Call for Price
Weinig Rondomat R 934 Profile Grinder S/N 934-1028
$ 8,775
WEINIG - Rondamat 934, ...Profile Knife GrinderSpecifications: -- 9-3/8" Max. arbor length, 4" - 9" tool dia. -- 6" - 8-7/8" Grinding wheel dia., grinding wheel speed inverter controlled with grinding wheel speeds 1,500 to 3,000 RPM; 1.1 kW (1.5 HP) Motor.Equipped with: -- Hydro-clamping of grinding wheel to arbor. -- Tool carriage movement with precision linear table bearings; setting gauges for axial constant; axial (side) clearance angle 0° - 20°. -- Onboard diamond wheel dressing, 13-Gallon Coolant tank with 1.2 HP Pump.Dimensions: 50" x 43" x 62" HWeight: 1,600 Lbs
WEINIG R 960 Profile Grinder 12"12" Max. arbor length, tool dia. 9" max. to 4" min. -- Grinding wheel speed inverter controlled 1,500 to 3,000 RPM by 1.5 HP motor. -- Hydro-clamping of grinding wheel to arbor. -- Tool carriage movement with precision linear table bearings, setting gauges for axial constant, axial (side) clearance angle 0ø - 20ø. -- Onboard diamond wheel dressing, 8-7/8" max. 6" min. grinding wheel dia.; 13-gal. coolant tank with 1.2 HP pump. Includes -- arbor dia. 1- 13/16".Note: New bearings on carriage
$ 21,500
WEINIG RONDAMAT R960 Profile Grinder. Working Dimensions: -- 9-29/64" Maximum tool width; 3-15/16" Minimum to 11-13/16" Maximum cutting circle. -- Grinding Wheel: Diameter 5-29/32" min. to 8-7/8" max. grinding wheel bore - 60 mm. Onboard diamond wheel dressing tool. -- Drive: Variable Frequency Controlled Drive giving a spindle speed - 1,500 to 3000 RPM; 1.5 HP Motor. -- Template carrier: Utilizes a template stylus-copy system, whereby the tool head table copying-grinding is effortless (precision linear floating table movement feels smooth as if there is zero gravity).Resistance template cross support with setting gauges for axial constant system; axial (side) clearance angle 0° - 20°. Holder for fixed and revolving tracing pins; for easy follow of the template to grinding aggregate. -- Coolant: 13-Gallon coolant tank capacity with 1.2 HP coolant pump. Includes: -- 1-13/16" arbor
WEINIG RONDAMAT R960 C Profile Grinder withSpecifications -- Working dimensions; 9-3/8" Max. arbor length, tool dia. 9" max. to 4" min. -- Grinding wheel speed: belt adjustment on the drive pulley -- speed sets of 1,500, 1,700, 2,400 & 3,000 RPM'S by 1.5 HP motor -- Mechanical clamping; of grinding wheel to grinding arbor -- Template carrier; to right side of machine for easy follow of template to grinding aggregate.Equipped with & Features -- Tool carriage movement with precision linear table bearings -- Setting gauges for axial constant, axial (side) clearance angle 0° - 20° -- Dressing tool;onboard diamond wheel dressing, 8-7/8" max. 6" min. grinding wheel dia. -- 13-gal. coolant tank with 1.2 HP pump.÷Includes -- Arbor with a 1-13/16" diameter.
Call for Price
Weinig R-930 Profile Grinder Mach. No 820/299
Call for Price
Weinig Profile Grinder MDL R929
Call for Price
Michael Weining Profile Grinder, Model R929 machine 929-808, 6" grinding wheel
Call for Price
Call for Price
Call for Price
Weinig Profile Sharpener