Mellott For Sale

VITAP - POINT K2 2.0 : CNC Machining Center (w/ATC/Boring) + Includes: "VITAP Bar Nesting System." -- SpecificationsVITAP - K2 2.0 CNC Center is the best and most technically advanced machine for wood processing. The K2 has a patented "Double Dynamic Transport (DDT)" System with: Double clamp technology that creates smooth panel movement.With an automatic tool changer and modern software, the programming for this machine is easy and efficient to use. This machine is perfect for companies of all sizes and is the optimal choice for your CNC woodworking needs. -- Working FieldMax. panel size "X" Axis infinite; "Y" axis 49.2" (1,250 mm); "Z" axis 1.97" (50 mm).Min. panel size "X" axis 10" (270 mm); "Y" axis 5.9" (150 mm); "Z" axis 0.1" (3 mm). -- Positioning Speed"U" Axis Panel feeding speed 82 FPM (25 MPM); "X" & "Y" axes 197 FPM (60 MPM); "Z" axis 49 FPM (16 MPM).Axes positioning by AC drives & brushless motors; the "Panel" moves in "X" axis & the "Machining Units" move in "Y & Z" axis.Max. Panel weight is 176 Lbs (80 kG). -- Work Area: Vitap "DDT" + "Vitap Bar Nesting System":DDT is short for "Double Dynamic Transport", a clamping system for work pieces on CNC Machining Centers, for moving the workpiece in "X" axis.The function of the DDT system consists of: (2) Gripper/clamps that move the workpiece in the same or alternate direction. This allows for a significantly longer travel distance of the workpiece compared to the travel distance of the gripper/clamps. DDT System is a requirement for Bar Nesting."VITAP Bar Nesting" is a special form of combining a Beam Saw & Nesting at the same CNC Machining Center. VITAP Bar Nesting is also designed to combine the advantages of nesting technology with the possibility of horizontal drilling.VITAP Bar Nesting is a technology that has been specially developed for VITAP Machining Centers. The prerequisite is a machine in which the X-axis is generated through the movement of the workpieces. A further prerequisite is the presence of (2) grippers for workpiece movement, known at VITAP as "DDT-System".Bar Nesting is not a complete nesting of the workpieces, as the large-sized (Ripped) panels must still be crosscut into stripes on a Saw.NC Controlled "Optical Material Sensor" creates a: “0“ Panel reference point by reading the panel's ends; this ensures that RH & LH (mirror image) panels will always be symmetrical.Fixed RH ("U" axis) panel clamping device with: Automatic panel adjustment according to the programmed information; LH side pressure clamp with automatic adjustment & pneumatic locking according to the panel width; scratch resistant idle rollers for panel positioning from the bottom & sides. -- Boring Unit (1) 2.2 HP (1.7 kW) - 3,600 RPM motor; (12) independent vertical spindles on 32 mm centers with: 6-Spindles in "X" axis & 6-spindles in "Y" axis.(8) Horizontal Spindles with: (2 + 2) spindles in "X" axis & (2 + 2) spindles in "Y" axis.(1) "X" Axis grooving saw: 7,000 RPM with 100 mm m

VITAP - 27-Spindle, ...Boring MachineSpecifications: 27-Spindle boring head: On 32 mm centers; drills vertically from bottom up, and head rotates to horizontal position for edge boring; head rotation is pneumatic with switch control. -- 2.5 HP - 2,800 RPM Motor; pneumatic drill head advance with speed control; head height adjustment with mechanical digital readout; 14" x 42" table size.Equipped with: (4) Pneumatic holddown clamps; 118" line boring fence with: (4) Flip stops; pneumatic foot pedal control.

For pre-glued PVC, veneer, & melamine laminate coil stock; 0.4 - 1.2 mm edge thickness; up to 35 mm panel thickness cap., automatic coil feed. -- Equipped with: Electronically controlled temperature setting for hot air blower; 3,000 Watts for up to 650° F temperature; (1) Min heat up time. -- Guillotine type front & rear end trim (with fast speed, flying knife); top & bottom flush trims with single motor drive to cutterheads. -- Overhead belt type feeder; 16 FPM feed speed. -- Mounted on machine base with panel support table.

Vitek Stroke sander Approx 8 foot capacity

Works well Taken out of service and stored

Vollmer Finimat Circle Saw Sharpener 120V 3 Phase

2005 Vollmer MAP400 Auto Leveling Machine S/N 9234

VALPATO LBK-150-ST 1 Feed Through Profile SanderTECHNICAL FEATURES: An added small needle type drum sander can be fitted with drum sanding aggregates of 25, ­30, ­35,­40, ­45 ­50 mm diameters which can be used for tighter curves and smaller radius sanding requirements. Storage compartments (2 in total) are located on each machine extremities, these are easily accessible and can be used for sanding belts and various tooling storage. Sanding belt motor power: 3 Kw Abrasive head motor power: 1.5 Kw Oscillation motor power: 0.38 Kw Feed motor power: 0.75 Kw Motor power for electrical adjustment of sanding group: 0.19 Kw Machine voltage: 480/3/60 Full Load Amps @ 480V: 15A Compressed air: Not required Dust collection requirement one (1) only 6" (150mm) port: 950 CFM Sanding belt speed: 14 Mt/sec Variable speed of the belt: from 5 to 25 m/min Sanding belt dimensions: 150 x 2640 mm Height of working table: 930 mm Dimensions of front working table: 1980 x 250 mm Machine dimensions: 2500 x 900 x 1600 mm Net weight: 1000 KMAIN FEATURES: User friendly PLC touch screen control panel is accessible from 360° by the operator, the control panel is centrally located on the infeed end of the machine. Factory installed variable feed drive (VFD), enables machine to run from 5 M/Min to 25M/min (+/­ 80 ft/Min). The entire sanding plenum rise and fall is motorized, it can be adjusted vertically in height to utilise the full height/width of the sanding belt. An oiling unit ensure long life of sanding plenum rise and fall master cylinder.

The VOLPATO LS-1N 1A Wide Belt Sander, introduced in 2006, epitomizes precision and efficiency in the woodworking industry. Crafted with advanced technology, this machine excels in delivering impeccable sanding results on wood surfaces, showcasing its commitment to high-quality finishing. Designed with a robust and reliable structure, the LS-1N 1A ensures stability during sanding operations, contributing to the production of top-notch wood products. The wide belt configuration allows for efficient material removal, achieving smooth and consistent finishes across various wood types.

This 2006 Volvo truck is in great condition internally and externally. The truck has 1,429,462.4 miles on it. The truck has an automatic transmission. The passenger seat has been taken off. We are currently waiting for the title of the truck to come in. If interested in this truck call Mr. Gavin 601-394-7796 Mr. Tim 251-366-3237 Kameron 251-242-5493 The truck is located in State Line, Mississippi, 467 St Peter St

2007 Volvo DHD D12 464 HP engine 10 speed Full locking 46k rears 4:44 ratio T ride suspension 452k miles Nice truck PICTURES COMING SOON

Volvo wheel loader bucket, 2 yard capacity, good condition

Volvo L90H Wheel LoaderSpecifications: Static tipping load at full turn: 22,265 lbs Bucket capacity: 2.9 - 9.2 yd³ Log grapples: 1.6 - 2.9 yd² Operating weight: 31,968 - 38,140 lbs Breakout force: 31,470 LBF Engine: Volvo D6J Max power: 1,400 - 1,900 RPM, ISO: 14,396 gross, 184 HP, ISO: 9,249, SAE J1349 Net, 184 HP Max torque: at 1,400 RPM, ISO 14,396 gross 689 LBF Ft., ISO 9249, SAE J1349 Net 689 LBF Ft. Tires 20.5R25 600/65R25

2018 volvo EC250EL -13721 hours -Tight and dry -Main bearing was mic'd and is good no play -Fire suppression -Auto greaser -60" pierce pacific grapples with cylinder over heal rack -Waylon rear entry cabs -High walker undercarriage -Dealer maintained.

To Be Sold In A Lot Of 5 2000 A40D 19557 hours 1998 A35C 201561 hours Unknown A35 257316 Hours 1995 A35 157949 1998 A35C 165793 Can Provide serial numbers per request

The L40 Volvo Wheel Loader is a robust and reliable piece of machinery, well-suited for various industrial tasks. This specific model comes fully equipped with both forks and a bucket, enhancing its versatility. With a new engine installed, the loader has only clocked 1,950 hours on the new engine, despite a total operation time of 14,900 hours. In addition to the new engine, it features a new harness and new tires, ensuring optimal performance and safety during operation. Designed by Volvo, a reputable manufacturer known for durable equipment, this wheel loader maintains high efficiency on demanding job sites. Its utility is ideal for businesses seeking dependable log loading solutions without investing in brand-new machinery. Given its recent upgrades and remaining service life, the L40 presents a valuable opportunity for anyone looking to enhance their fleet with a capable and extensively serviced loader.

2004 Volvo Dump Truck with 14ft bed, Auto 6 speed trans, 75%rubber on rear, New tires on front. More pictures to come Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Volvo A25D Articulated Dump Truck with 8,620 hours. Inspection report available. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 VOLVO VNR TRI-AXLE DUMP TRUCK 489,XXX MILES 20K FRONT AXLES 44K BACK VOLVO D13 ENGINE AUTOMATIC TRANSMISSOPM DOUBLE FRAME 16 FT BODY NEW TIRES VERY GOOD CONDITION WE CAN FINANCE TAXES AND REGISTRATION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2013 Volvo L70G Wheel Loader with Forks S/N VCE0L70GL08614024 18491 Hrs.