Mellott For Sale

2012 Ponsse Ergo Processor, H7 Processor, Machine has 17,600 Hours, Main Wiring Harness Replaced, Engine Computer,is New, New Injectors, New Rotator, New Lower Knives, New Water Pump, New Cam Sensor, Enclosed Cab with Heat and AC, New Lower Section on valve bank replaced, Ready for the Woods. Operating Weight 35,274lb Shipping Length - Non Tilt 25.2ft in Overall Width 9.32ft in Height To Top Of Cab 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Ponnse Ergo Processor, 13,000 Hours on the Engine Mercedes 270 HP Engine, C-4 Crane and H-7 Processor Head, 1000 Hours on Remaned Engine, Outer Boom Chains Replaced New Crane Bearing, Enclosed Cab with Heat and AC, Tracks available Ready for the Woods. Operating Weight 35274lb Shipping Length - Non Tilt 25.2ft in Overall Width 9.32ft in Height To Top Of Cab 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2022 Ponsse Bear Processor -2300 hours -Tracks about 90% -Tires about 90% -Tight and dry -H8 head

2016 Ponsse Ergo, 12,157 hrs., $259,900

2017 Ponsse Scorpion King Harvester with 11,500 hours. Includes a Ponsse H7 Head. Weight: 51,147 lbs Length: 315.7 in Width:105.9–121.5 in Height: 146.5 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Ponsse Scorpion King Harvester, 13,000 hours, H7 R5500 head. Weight: 51,147 lbs Length: 315.7 in Width:105.9–121.5 in Height: 146.5 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Portage & Main Outdoor Wood Stove W/ Wood Chip Feeder

Porter Planer Model 700 S/N 5916, Straight Knifes 10HP Motor

Porter Cable 5HP Single Phase Compressor.

The professional horizontal splitter with longitudinal tractor chassis for mobile applications! Complete Posch Splitter, Processor and Packaging lines sold exclusively through Northeast Implement. Better cutting, splitting machines that are fast and safer, call 607-589-6160 to get yours today!

2000 Povlsen Wide-bandsaw mill. In good working condition 75hp Isuzu Diesel engine and has approximately 1500hrs on it. Mill can saw logs approximately 36"D x 25' L Comes with an Armstrong #2 bandsaw sharpener and approximately 20 new bandsaw blades.

Powerfist 1HP Dust Collector

POWERMATIC WP 2510 PLANERThe POWERMATIC "WP 2510" Planer with a 15 HP motor has a solid steel helical cutterhead with four-sided carbide knife inserts that require no adjustments when changing. With a digital readout and simple PC controller, setting up table heights is quick and easy. -- The frame is machined from heavy cast iron and has extra wide side panels that offer rigid bed support and ensure accurate alignment. -- The planer's segmented, serrated infeed roll with segmented chip breakers has an independent yield of 1/4". Its automatically adjusting, chain drive gear box powers the 3" dia. infeed rollers, solid pressure bar and dual outfeed rollers for precise feeding of stock. -- The 3-speed feed selector gives woodworkers flexibility by changing feed rates quickly and easily. -- The "WP 2510" Planer has a large 32-3/16" x 26" precision-ground table which contains two adjustable table rollers for smooth feeding of uneven stock. The planer has a Quick-Set micro-adjustable lever that easily raises and lowers the table rollers from 0 to 0.05". The hood features a built-in 5" diameter dust chute. -- SPECIFICATIONS: -- Max. planing 25", max. planing thickness 9", max. full width depth of Cut 1/8", max. depth of cut ¼". -- Min. Planing length 10", cutterhead dia. 3-3/8", cutterhead speed 5,000 RPM, cuts per minute 30,000; 15 HP motor. -- Feed Rate 20, 25 and 30 FPM, Outfeed Roller Diameter 3 "; number of Knives: (174) Four-sided inserts. -- Table Size: 32 3/16" x 26"; dust port diameter 5 ", dust collection CFM Required (600) CFM. -- Bed Rollers adjustable from front fom 0" to 0.05"; Readout Scale: inch/ metric; Table Height adjust manual with 1 Turn = 1/32", (2) column for bed support, 2-1/2" column dia.; (1) infeed and (2) outfeed rollers; includes Tool Kit.

POWERMATIC Turbo Cone Dust Collector with Twin Canister Filter Kit;Complete with the following features: -- 3 HP 3 PH Material Fan, -- Generates 1,782 CFM. -- Ships from Oregon Coastal region.

POWERMATIC - RB-37, ...Single Head Wide Belt Sander1-Head, 36" width cap., combination sanding head. -- Includes: 4" Dia. contact roll & 2" wide polishing platen, micro-adjust platen; 15 HP main motor. -- Abrasive belt size: 37" x 60"; with air tensioning, air jet abrasive belt tracking.1 HP Feed drive; variable feed speed of 15 - 30 FPM conveyor speed.0" - 5-1/4" Opening with: (4) Screw jacks; double infeed & outfeed rubber covered holddown rolls. -- Complete with: Magnetic starter; overload protection; load meter; emergency brake.

TABLE SAW TOP MEASURES 44" WIDE X 76 ½" LONG TABLE HEIGHT FROM FLOOR 34% " COMES WITH 5 - 12" DADO BLADES 1 HORSE POWER POWERMATIC MATERIAL FEEDER 5 HORSE POWER SAW ARBOR MOTOR 440 VOLT 3 PHASE

20" Dia. dynamically balanced aluminum disc, 3 HP - 1,740 RPM direct drive motor; 15" x 27-1/4" table w/miter gage slot, tilts 30° upward & lowers 45° downward, 90° positive table stop; rack mechanism for raising & lowering table by hand crank, heavy bolt-down steel base. Complete with reversing switch and miter gauge. Also available in Single-phase in 2 HP motor.

POWERMATIC - WB-25, ...Wide Belt Sander1-Head; 25" width capacity; 1/8" to 6" thickness capacity.Combination sanding head with: 4" Dia. rubber-covered contact roll; 2" wide polishing platen; micro-adjust platen; steel abrasive belt tension roll; steel idler roll: 25" x 75" Abrasive belt capacity.Equipped with: -- 15 HP 3-Phase main motor; 1 HP variable feed motor, 15 - 49 FPM. -- 1/4 HP Table raising & lowering motor with: Auto adjust thickness assist; 1/8" to 6" opening with (4) screw jacks. -- Double infeed & outfeed rubber covered holddown rolls. -- Complete with: -- Digital readout; air eye belt sensing; limit switch overtravel protection; magnetic starter; overload protection; load meter; emergency brake.Includes: Owner's manual & parts list.

POWERMATIC - 26, ...Single Spindle Shaper -- Specifications: 5 HP (3.7 kW) - 3,600 RPM Belt drive motor; 7,000 & 10,000 RPM spindle speeds via 2-speed step pulley; reversing switch. -- 1" Dia. solid interchangeable spindle featuring 3-7/8" cap. under the nut; 3" spindle travel w/handwheel adjustment -- Complete with:24" x 26" Cast iron table; miter slot; 7" insert opening; adjustable fence; magnetic controls. -- Actual Model is: POWERMATIC 26

POWERMATIC - TS-80, ...Single Spindle ShaperAccepts: 3/4" - 1" - 1-1/4" Dia. interchangeable spindles; 5-1/2 HP motor; 3,625 - 5,000 - 7,250 - 10,000 Spindle speeds. -- 4" Cap. under nut when using 1-1/4" spindle; 6-19/64" spindle stroke; approx.: 39-1/2" x 31-1/2" Extra thick cast iron main table. -- Complete with: Adjustable split fence; spring hold-downs; removable table inserts; dust collection shroud; reversing switch; spindle brake; cutter-head guard. -- Includes: Infeed & outfeed tables shown in picture and a box of spindles. - NOTE: Needs some work on bearings.