Mellott For Sale

1993 Morbark Model 1200 Tub Grinder, Equipped with a Cummins 650 HP Engine, Autofeed, Wireless Control, New Clutch 1 year ago, Hours are Unknown, New Turbo, New Injectors 300 Hours ago, Ready to Work. Weight 55,622 lb Length 38.15 ft Width 11.9 ft Height 12.8 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Morbark 50/48 Whole Tree Drum Chipper. 11,000 hours on a rebuilt 3412 CAT engine with 760HP, Auto Feed, Fire Suppression, Radio Remote and Tether cord. Machine was repainted. Length 40'8.25" Height 12'6" Width 9'9" Gross Weight (approx.) 72,120 lb

2016 Morbark 4600XL Horzontal Track Grinder, Cat C27 with 7,500 hours, Magnetic Head Pulley, Radio Remote. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Morbark 58" 3K Chipper w/150Hp 1725 RPM Motor

2017 Morbark 50-48 Drum Chipper -6590 hours -Tight and dry -Well maintained -Just spent 100k on feed chains new chute and much more Does not need a thing

1050 HP C27 engine, Morlift 500, 3 flail with bark conveyor. Boom cylinder being repacked, one owner, rebuilt engine

2021 Morbark 6400XT Track Horizontal Grinder C32 Cat diesel with 1890 hours, Cat platinum warranty 5 years or 8000 hours. 42" x 61 3/8" Hammermill System w/ 28" diamter rotor and 1" thick rotor plates 40" diameter feed roll Dust Suppression System Hydraulically operated debris containment door Rod Puller 325L GD CAT undercarriage with double grouser pads, Ready to Grind… Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Rebuilt 48" 6 Knife Horiz Feed, Top discharge in stock- set for 7/8" chip - price shown is with exchange

2015 Morbark Stac-Trac 1000 Track size: 30’, overall height: 9’ Drive: 15hp. good shape and maintained. Lots of spare parts included. SPECIFICATIONS 1000 Stac Trac Specifications Power 15-hp electric Track Speed 211 fpm Grapple Opening 1.375" – 18" Weight 4,700 lb Boom Swing 360 degrees Manpower Required one operator Standard Track 30' Lifting Capacity 1,480 lb

2018 Morbark 3400XT Wood Hog Horizontal Grinder CAT C18, 765 Hp engine Approx 2100 hours New belly belt/skirting; Rebuilt mill Engine has new cylinder sleeves with rod & main bearings, purge pump & hydraulic fan motor (replaced by manufacturer due to a defect) Remote Magnet 1” & 5” screens Great machine and ready to go to work

2014 Morbark Flail 223 Debarker, has a Caterpillar 9.3 that's been deleted. It has 9,249 frame hours and 600 on the engine rebuild. New Hydraulic Clutch Last Year, New Rear Feed Wheels 23" Capacity Ready for the Woods. Length (transport) 33'5" Height (transport) 9'11" Width 9'10" Weight 46,700 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1996 Morbark Model 20 Whole Tree Chipper ,Caterpillar 425 HP Engine, Enclosed Cab with Heat and AC, Needs a Condenser for the AC, Machine has Separator ,Ready for the Woods... Overall Length 21’6” Overall Width 8’0” Overall Height 13’6” Weight 10,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 Morbark 4600xl Horizontal Grinder, Cat 1050hp, 6952 hours, Radio Remote, Magnetic Head Pulley. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 Morbark 1300B Tub Grinder with 3,800 hours. Length: 45 ft Height : 13 ft 6 in Width: 11 ft 11 in Gross weight (NCL): 74,580 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2010 MORBARK 40/36 DRUM CHIPPER 6135 DEERE 600HP ONE OWNER HOURS WILL GO UP STILL IN USE VERY WELL MAINTAINED JUST INSTALLED NEW DRUM 7/18/25 AT 7278 HOURS

Morbark Chip Blower Hopper Feed Came out Running 10 HP Motor

Morbark 16' Outfeed Trough with 3 arm Kicker & Hyd Drv.

Morbark 640 Debarker

This mill has been shut down. The debarker is complete and ready to be removed. Morbark 636 Debarker Infeed/Outfeed Log Conveyors Waste conveyor runs under the system Approx 7' high structure Separate conveyors to load chips to trailer Includes All electric and hydraulic, steel walkways, 6x6 insulated cab

Morbark Rosserhead Debarker Model 636