Meadows Mills For Sale

2 Strand Log In feed deck 5ft Wide x 17ft Long With SNL

Mellott 30' x 3' 2 Strand Transfer Deck with Motor and Drive

22' Mellott Vibrating Conveyor 19" bottom, 4" flared sides, 22" top 10 hp drive.

Mellott 20" x 4.5" x 18' Vibrating Conveyor with Dust Screen

10' x 9' 4 Strand Cant Deck With Drive

Mellott Hyd Unit

In stock at factory. New Mellott Model 8 log turner is built for speed and strength capable of turning both up and down. The mast of the turner is constructed of 1/2” flame cut plates and has two heavy rubber down stops to extend the life of the cylinders. Heavy construction and a simple design are used throughout the Model 8 in order to keep maintenance and down time to a minimum. Frame constructed of C10 X 15.3 Lb. channel Pivot shaft is 2 7/16” diameter Pivot bearings are spherical roller bearings Pivot bearings have cast steel housings The Log turning chain is Rc140 The Log turning chain is direct driven by a Eaton 6000 series hydraulic motor The side and bottom chain wear plates are replaceable The turner has dual cylinders to reduce twisting strain of the mast

Mellot Unscrambler

Mellott Vibratory Conveyor Includes drive unit and motor

Mellott 36 Rosser Head Debarker with Controls and 30hp motor on the head.

Mellott Log Turner, chain type

Mellott 24" x 26' Rollcase w/Spiral Roll Section w/4' 4 Arm Pop Up Transfer w/6' 3 Arm Pop Up Transfer w/Drive

Mellott Rosser Head Debarker w/Cab, Controls, Steps, 30 HP Elec On Head. MDL# 200 S/N# 88200166

MLS Number 13567192 Mercodor Industrial Shredder Just under 2 hours of use Shredder with base Outfeed conveyor with permanent magnet belt 2 x 20Hp 480 volt/60Hz Knives 20 mm 5 hooks Machine opening 1200 mmx 600mm Can process trim ends, sawdust and plastic Machine is still set so we may process wood or plastic for samples if required.

Mereen Johnson 431-DC Gang Rip Saw

Mereen-Johnson 312-DC/SR2 Gang Rip Saw with Rip Navigator Scout InfeedSpecifications -- Arbor Space: 12" -- Thickness Capacity: Up to 3" (w/ 14" Blades) -- Minimum Length: 22" (30" for Glue-Joint) -- Two Shifting Blades -- 1"Minimum Net Rip Between Shifting Blades -- Machine-Mounted Laser Stand -- Arbor Motor: 50 HP, Direct-Drive -- Feed Motor: 3 HP -- Variable Speed Feed: 30 - 150 FPM -- "Posi-Feed" Friction Feed Chain w/ Aluminum Slats and Replaceable Rubber Inserts (Rubber Inserts are Brand New) -- Hardened Steel Feed Chains & Track w/ Oil Mist Lubrication -- Air-Loaded Press Rolls -- Single Lower, Double Upper Infeed Anti-Kickback Fingers w/ Single Upper OutfeedEquipped with & Features -- Rip Navigator Scout Arranged to Receive 17'-6" Maximum Length Boards from Scissors Lift Manually placed on Board Dealer ArmsIndividual Boards are Automatically Dealt onto Lateral Chains and Conveyed to a Board Stop -- Board Stop Queues Boards for Advancement to Disappearing Fence -- Automatic Adjusting Fence Positions Boards for Placement into Gang Rip Saw Fence Positioning Through Rip Navigator -- Fence Mounted Pinch Roll Feeds -- Board to Gang Rip Saw Mounted Power Table -- Voltage: 480 with Transformer (Original Voltage as built is 575) -- New Bearing in Saw Arbor -- New Rails for Scout Infeed Chains -- 5743 HOURS -- NEW IN 2013

Manufacturer specs (to be confirmed): - Mereen Johnson "312-DC-1" Gang rip saw - 12" Arbor cap., 14" max. dia. tooling, 3-1/2" max. thickness, 30" min. length for glue joint accuracy & 22" min. for busting only; 6" throat. - 50 HP - 3,600 RPM TEFC Direct drive motor - Arbor with disc brake & load meter - Arbor lockout on the access door - Feed & chain: 3 HP Variable feed speed from 30 - 150 FPM with adjustable jam protection, M-J "Posi-Feed" dip bed carried on 5" pitch hardened double-V chain - "Quad Life" hardened dip cams, extruded structural aluminum feed bed slats with BRAND NEW replaceable steel-backed rubber insert strips, automatic chain oiler with low-level shutoff. - (4) 3" Dia. air loaded overhead pressure rolls; full width segmented maple, spring loaded overhead pressure shoe, pressure rolls & pressure shoe unit adjust with scale & pointer thickness reference; anti-kickback fingers. Includes (1) saw sleeve and spacers. - 460 v/3 ph

MEREEN JOHNSON 424 DC Multiple Blade Rip Saw:Specifications: -- 24" Arbor cap., 14" max. dia. tooling, 3-1/2" max., 22" min. length, 6" throat. -- 75 HP - 3,600 RPM TEFC Direct drive motor, arbor with disc brake. --Feed & chain:3 HP Variable feed speed from 50 to 150 FPM, M-J "Posi-Feed" dip bed carried on 5" pitch hardened double-V chain, -- "Quad Life" hardened dip cams, extruded structural aluminum feed bed slats with replaceable steel backed rubber insert strips, automatic chain oiler with low-level shutoff. --Equipped with & Features: -- (4) 3" Dia. air-loaded overhead pressure rolls -- Full width spring-loaded overhead bed plate -- Height adjustment with scale & pointer reference -- Anti-kickback finger system with (1) lower & (2) upper on infeed. -- (2) Upper dust hoods, (1) 10" & (1) 5" dia. & (1) lower 4" dia. hood -- Requires 3,820 CFM

MEREEN-JOHNSON Model "424-DC/SR ( 1 ) Moving Blade Gang Rip SawSpecifications -- 24" Arbor cap., -- 14" max. dia. tooling, -- 3-1/2" max., -- 22" min. length, 6" throat. -- "Select-A-Rip" multiple Rip Saw with rapid adjustment of (1) moveable saw blade (shifts at approx. 3" per second); can be used independently or in conjunction with a gang sleeve arrangement; provides straight line gang ripping while maintaining optimum yield and delivering glue-joint accuracy.Equipped with & Features -- Select-A-Rip includes a control console and overhead laser lights for accurate blade positioning. -- 75 HP - 3,600 RPM TEFC Direct drive motor. -- Feed & chain: 3 HP Variable feed speed from 50 - 150 FPM, -- M-J "Posi-Feed" dip bed carried on 5" pitch hardened double-V chain, "Quad Life" hardened dip cams, -- Extruded structural aluminum feed bed slats with replaceable steel backed rubber insert strips, -- Automatic chain oiler with low level shutoff. --: (4) 3" Dia. air loaded overhead pressure rolls; full width spring loaded overhead bed plate, -- Eight ( 8 ) adjustment with scale & pointer reference; -- Anti-kickback finger system with (1) lower & (2) upper on infeed. -- (2) Upper dust hoods, (1) 10" & (1) 5" dia., requires 3,820 CFM. -Note From The Seller Machine was used in a low production environment and has low hours.

MEREEN-JOHNSON "312-DC-OPH1" DIP CHAIN GANG RIP SAWSpecifications -- 12" Arbor cap., -- 14" max. dia. tooling, 3-1/2" max. thickness, -- 30" min. length for glue joint accuracy & 22" min. for busting only; -- 6" throat. Equipped with: & Features -- 50 HP - 3,600 RPM TEFC Direct drive motor, -- Arbor with disc brake & load meter, arbor lockout on access door.Feed & chain: -- 3 HP Variable feed speed from 30 - 150 FPM with adjustable jam protection, -- M-J "Posi-Feed" dip bed carried on 5" pitch hardened double-V chain, "Quad Life" hardened dip cams. -- Extruded structural aluminum feed bed slats with replaceable steel backed rubber insert strips, -- Automatic chain oiler with low level shutoff. -- (4) 3" Dia. air loaded overhead pressure rolls; -- Full width segmented maple, spring loaded overhead pressure shoe -- Pressure rolls & pressure shoe unit adjust with scale & pointer thickness reference -- Anti-kickback fingers. -- Lasers at infeed for pocket location.