Equipment For Sale

NORDFAB NFK Series Modular Dust Collector with (8) Modules, reverse air cleaning and drag chain unloading into a Rotary Air Lock (RAL) --23,000 CFM approx. capacity based on filter area and desired Air to Clothe Ratio. With 50 HP. Consisting of (248) filter bags of 8.7" dia. x 77.2 " long(220 mm x 1,960 mm long) also (8) filter bags of 8.7" dia. x 54.1" long.(220 mm x 1,375 mm long) - located at cleaning fans - for a total of 3,680 sq. ft. of filter area. -- Consists (8) modules and (1) inlet blank module. Fan inlet approx 26" dia. -- Bottom conveyor chain with scrapers carrying the dust to one end and fed into the RAL -- Includes NRS-10 Rotary Air Lock and Transfer Blower to convey the dust to an enclosed waste container (not included). -- Electrical control panel with starters included. -- Overall dimensions 32' long x 7.5' depth x 13.5' high (without support steel)., Approx weight 10,000 lbs. --Actual model is NFK 8AJ/1BL

Nordfab Air Blower with 40HP Motor

Norfield Door Light Cut Model 3800

NORFIELD - 250-M: Strike Router -- Strike Router capacity: 9' Length x 1-5/8" thickness cap.; infinite width; mortising plate & bolt relief in (1) continuous operation. -- 1-1/2 HP Router: Processes any strike up to 4-7/8" long, including T-strike. -- Rectangular relief leaves more wood in jamb for greater strength and more professional appearance.

Norfield 1020K Double Trim Saw This machine is designed to miter casing/trim up to 3-1/2” wide and up to 25 pieces per minute. Excellent saw for any size Doorshop

Northern Automation Lumber Stacker with Lift Table. 3 phase. 36"-192" capacity. #C935

NORTHFIELD - #4, ...Table SawSpecifications: -- 16" Dia. saw blade cap.; 7.5 HP - 3,450 RPM motor; 1" dia. arbor; 13/16" dado cap. with: Thin collar; blade tilts: 0° - 45°; 32" rip cap. with T-type fence.

This item is in an Auction on exfactoryauctions.com. Go here to view item: http://exf.ac/i6q NORTHFIELD 12HD 12" Heavy-Duty Jointer Specifications: Max. depth of cut 5/8", Rabbeting cap. 5/8" x 12". 17” x 51-1/2” x 32-1/2” H. Outfeed table size 17” x 43” x 32-1/2” H. Equipped with: 3-1/2” Dia. 3-Knife Cutterhead. 5 HP - 1,735 RPM Motor. 52” L x 5-1/2” H Cast-iron fence, with 0° - 45° Tilt. Swing-away guard.

1/2 and 3/4 yard grapples. Northshore grapples in comparrison to other manfactures are larger in size. There 1/2 yard grapple is same as 3/4 yard. Sizes available up to 2 yards.

Manufacturer’s Specification - 15HP Motor + 1HP feed motor (with Wye Delta soft start) - Mechanical variable speed (45' – 100' FPM) provides a speed range for all material types and thickness ranges of 3/16”- 3-1/2”. - Bottom & top kickback fingers - Rack and pinion fence for precise and quick positioning. - Digital electronic oiler provides maximum chain and race life. - 15-1/2? distance from column to blade. - 8' glue line tolerance.

NORTHTECH - NT-920C-200: 2-Head Planer Sander Specifications -- 2-Head. 37" width cap.; 1-knife planer head followed by a wide belt sander head. -- 0" - 6" Motorized opening with: PLC control; keypad entry; LED readout for part thickness. -- 1st Head. 6" Dia. helical planer head with: (6) Rows of staggered carbide inserts; each insert has (4) usable sides; 30 HP motor. -- 2nd Head. Combination sanding head with: 4-5/8" Dia. rubber covered contact roll; 2-1/2" wide finishing platen; 20 HP motor. -- 37" x 75" Abrasive sanding belt; solid-state belt tracking. -- 3 HP Variable feed drive from 15 - 50 FPM; endless belt conveyor with automatic tracking.Complete with: -- Infeed over thickness bar. -- Emergency stops at infeed & outfeed. -- Air-operated disc brakes on sanding heads. -- Electrical interlocks on main access doors. -- Electrical controls with overload protection. -- Motor load meters. -- Panel cleaning brush.

NORTHTECH Four (4) Head Lineal Brush SanderSpecifications: • Sanding Head configuration: 2 Top + 1 Opposing Right + 1 Opposing Left• Working width up to 12"• Working thickness range: 1/4" - 6"• Minimum working length: 30"• (2) Top 1.5 HP Sanding heads RPM are inverter controlled• (2) 1 HP Opposing side sanding heads RPM are inverter-controlled• 150/180 Grit setup included; other grits available upon request• (2) 1/4 HP feed motors with 25 - 105 feed speed range• (2) 5" top dust ports requiring 681 CFM @ point of extraction• (2) 4" Side dust ports requiring 436 CFM @ point of extraction• 230V or 460V 3PH 60HZ• Net / Gross weight: Approx. 1,056 Lbs / Approx. 1,300 Lbs• Approximate Machine dimensions (LxWxH): 59" x 52" x 67"• Tool box and Operation/Parts Manual included• Warranty is one-year parts

NORTHTECH NT-610 HC TOP AND BOTTOM PLANER: --24" x 8" cap., min. material length 12". Table size is 111" x 24". -- 50 HP top and 40 HP bottom belt driven motors; --Minimum working length is 12" and minimum working thickness is 1/4". -- Variable feed speed 55 - 155 FPM powered by a 5 HP feed motor; 1 HP motor for table raise & lower and (4) ball screws. -- Both cutter heads are helical carbide insert knife heads, 6,000 RPM. MACHINE FEATURES: -- Rugged cast iron and plate steel fabrication. -- Overhead feed cnveyor with 1,100 individual spring loaded "feed fingers" to provide excellent feed characteristics. -- Computerized top cutterhead positioner is accurate to +/-0.001" -- Cutterhead tooling technology gurantees low noise, reduced power requirements, minimal operations cost and repetitive finish on the most difficutl hardwoods. -- Patented lifting column system (synchronized transmission) gurantees repetitive setup and long-term dependability. -- DP-525 Thickness Setting Unit --Patented universal drive transmission for feed groups and infeed carpet allows a maintenance free design verses chain drives. -- Cutterheads are solid steel construction, dynamically balanced and mated with precision pulleys. -- Cutterheads are supported by "NSK" class 7 precision ball bearings and prcision housings. -- Chromed beds, Guards and skirts for operator safety. -- Additional Specs: Machine dimensions: L2830 x W185 x H1700 MM; Weight: 9,000 lbs; Dust Collection: 3600 CFM

NORTHTECH NT-610HC TOP AND BOTTOM PLANER: --24" x 8" cap., min. material length 12". Table size is 111" x 24". -- 50 HP top and 40 HP bottom belt driven motors; --Minimum working length is 12" and minimum working thickness is 1/4". -- Variable feed speed 55 - 155 FPM powered by a 5 HP feed motor; 1 HP motor for table raise & lower and (4) ball screws. -- Both cutter heads are helical carbide insert knife heads, 6,000 RPM. MACHINE FEATURES: -- Rugged cast iron and plate steel fabrication. -- Overhead feed conveyor with 1,100 individual spring loaded "feed fingers" to provide excellent feed characteristics. -- Computerized top cutterhead positioner is accurate to +/-0.001" -- Cutterhead tooling technology gurantees low noise, reduced power requirements, minimal operations cost and repetitive finish on the most difficult hardwoods. -- Patented lifting column system (synchronized transmission) gurantees repetitive setup and long-term dependability. -- DP-525 Thickness Setting Unit --Patented universal drive transmission for feed groups and infeed carpet allows a maintenance free design verses chain drives. -- Cutterheads are solid steel construction, dynamically balanced and mated with precision pulleys. -- Cutterheads are supported by "NSK" class 7 precision ball bearings and precision housings. -- Chromed beds, Guards and skirts for operator safety. -- Additional Specs: Machine dimensions: L2830 x W185 x H1700 MM; Weight: 9,000 lbs; Dust Collection: 3600 CFM

NORTHTECH NT 25 RS-HA Finger JointerFinger jointer with (2) shaper and press capacity of 6" wide X 20' long pressSpecifications: -- Northtech Finger Jointer System w/ Model NT-25LS-HA Left Shaper, NT-25 RS-HA Right Shaper, Glue System, and NT-20AH-HA Pressing Station -- Left Hand Shaper Unit includes 20 HP Shaper, 7.5 HP Saw Motor, 1 HP Bottom Scoring Motor, and a Pusher Cylinder to Send Parts Away -- Right Hand Shaper Includes 20 HP Shaper, 7.5 HP Saw Motor, and Top & Bottom Scoring Motors and Glue Application Head -- Shapers have 29" x 28" Tables -- 50mm Diameter Shaper Spindles -- Maximum Length X Height of Workpiece 40" x 6" -- Minimum Length X Height of Workpiece 6" X 0.8" -- Model NT-20-AH-HA Finger Joint Press -- Pressing Length: 20' -- Cut-Off Saw to Cut Pieces to Length. Saw Motor: 3 HP -- Hydraulic Press Feed with 7.5HP Motor -- Pneumatic Top & End Pressure -- All Units Include Push-Button ControlsNote: Purchase used in 2022 after been cleaned and checked, now replace with larger system

NORTHTECH NT-KL-43-RC Wide Belt Sander (2) Heads;43" width cap. Drum, Combination Head.Head Configuration:1st Head: Rubber-covered contact drum with 25 HP motor2nd Head: Combination head with a rubber-covered contact drum and 2-1/4" wide finishing platen, 20 HP motor.Specifications: -- Thickness opening with PLC control, (DP-525 controller) keypad entry automatically adjusts to any thickness with LED readout. -- 37" x 75" Abrasive belts, TRU-TRAK solid state abrasive belt tracking. -- Variable feed drive 13 - 49 FPM, 2 HP motor. -- Endless belt conveyor, infeed and outfeed rubber covered pinch rolls. -- Complete with: 0" - 6" Automatic part thickness set up.Equipped with & Features: -- Infeed and outfeed rubber covered spring loaded holddown rolls. -- Feed emergency stops at infeed. -- Disc brakes on sanding heads, electrical interlocks on main access doors, and motor load meters. -- Note: Year of manufacturing has to be verified.

NORTHTECH NT-EV-920RC Dual Head Wide Belt Sander2-Head Wide Belt Sanding Machine with 37" capacity. Specifications: -- First head 8-1/4" Dia. grooved rubber contact roll, with 20 HP motor. -- Second head: Combination finishing platen with grooved rubber roller and polishing pad, with 15 HP motor. -- Two (2) infeed and outfeed spring loaded holddown rollers; 2 HP variable speed feed drive. -- Sanding belt size: 37" X 85" and with electronic belt tracking. -- Motorized opening between conveyor bed and sanding heads. -- Ammeters for measuring motor loads. -- Includes spare abrasive belts.

NORTHTECH - SRS-12 ...Straight Line RipsawSpecifications: --15 HP Motor, 1" dia. saw arbor, speed of 4,500 RPM, 8". -- Max. blade cap.: 12". -- Max. depth of cut: 3-5/16". -- Part length: 8" Min. -- Distance between saw & column: 18"; 60" W x 33" table. -- Feed & Chain: 2 HP Feed drive motor; variable feed speeds of: 59 - 72 - 91 - 111 & 137 FPM. --7" Wide double chain, with automatic chain lubrication.Equipped with & Feature: -- Top pressure system with (6) spring loaded holddown rollers. -- Double row antikickback fingers. -- Adjustable infeed fence. -- Safety side guard. -- 4" Dia. dust hood outlet. -- Push button controls. -- Magnetic starters. - Overhead post for laser mounting.

Multiple Rip Saw with One Fixed and One Moveable Blade Two 10 HP Saw Motors, One for Each Blade Width of Fence Movement from Fixed Blade: 0" - 9.45" Moveable Saw Blade Traverse (From Fixed Blade): .78" - 8.35" Minimum Working Length: 12" Maximum Cutting Thickness: 2.56" Maximum Width of Cut from Fence: 17.71" Saw Blade Diameter: 12" Arbor Diameter: 1" Arbor Speed: 4,500 RPM Aluminum Chain w/ Rubber Slat Inserts Width of Feed Chain: 11-3/4" Feed Motor: 2 HP Variable Speed Feed from 39 - 98 FPM Three Rows of Upper Anti-Kickback Fingers Width Setting Drive Motor: 2 HP

16 HP 12 filter bags up 4 collection bags lower Lots of pipe