Logging Equipment For Sale

2012 Ponsse Ergo Processor, H7 Processor, Machine has 17,600 Hours, Main Wiring Harness Replaced, Engine Computer,is New, New Injectors, New Rotator, New Lower Knives, New Water Pump, New Cam Sensor, Enclosed Cab with Heat and AC, New Lower Section on valve bank replaced, Ready for the Woods. Operating Weight 35,274lb Shipping Length - Non Tilt 25.2ft in Overall Width 9.32ft in Height To Top Of Cab 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Ponnse Ergo Processor, 13,000 Hours on the Engine Mercedes 270 HP Engine, C-4 Crane and H-7 Processor Head, 1000 Hours on Remaned Engine, Outer Boom Chains Replaced New Crane Bearing, Enclosed Cab with Heat and AC, Tracks available Ready for the Woods. Operating Weight 35274lb Shipping Length - Non Tilt 25.2ft in Overall Width 9.32ft in Height To Top Of Cab 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2020 Ponsse Ergo 8W -4200 hours -H8 Head -8-wheeled -Tracks included -1800 hours left on the extended warranty Ready to work!!!!!

2011 PONSSE ERGO 8 WHEEL HARVESTER 13,500 HOURS UPDATED OPTI H7 HEAD MERCEDES ENGINE PURCHASED FROM PONSSE IN 7/22 REFURBISHED VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2023 Ponsse Buffalo -750 hours -Tight and dry -16 ton carrying capacity -Active crane -K100+ loader -Supergrip 360s grapple -Tracks not included OPTIONS LIST IS IN PICTURES ABOVE!!!!!

2003 Ponsse Ergo Harvester, H73 Processing Head, Enclosed Cab with Heat and Air Conditioning, Center Section is Tight,Has Chains on Front, No Tracks, Well Maintained Machine, More Pictures coming soon, Ready for the Woods. Operating Weight 35,274 lbs Height - Top of Cab 12 ft Overall Width 9 ft Shipping Length - non tilt 25 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Ponsse Ergo Harvester, H7 Processor Head, 13,000 Hours, Machine has Enclosed Cab with Heat and Air Conditioning, Good Centers Tracks on Rear, More Pictures Coming Soon Operating Weight 35,274 lbs Height - Top of Cab 12 ft Overall Width 9 ft Shipping Length - non tilt 25 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Ponsse Scorpion King Processor, Equipped with H-7 Crane, Engine has 11,500 Hours, One Set of Eco-Tracks, Extra Bar and Chains, Has CT+ 1 Auto Tensioner, Enclosed Cab with Heat and Air Conditioner, Air Condition Just recently done by Ponsse, More Pictures of Interior Coming Soon. Comfort Grips. Weight 49,604 lbs Length 316 in Width 104–112 in Height 147 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2000 Ponsse Bison -Uknown hours -Perkins 6 cylinder diesel -New iQan control system for the crane and steering (100% joystick controls) -New Webasto preheater -Tracks and tire chains included -New Red Dot heat and AC system -Brand new LED lights -Good glass on sides and rear, front isn’t bad but not new -Has a few small leaks but otherwise ready to go to work

Ponsse Forwarder 2nd Gen Cab (Full Set of Windows) Starting at $4,260 for full set// Crane Side Only Starting at $1100 - Call 715.560.3929

2016 Ponsse Ergo 8 wheel Processor -12,900 hours -C44+ crane -H8 head -New head pump -New drive coupler -Pump gear box rebuilt -New windows -New exhaust -New feed wheel arms -New feed wheels -New knives -Saw motor and complete saw assembly and much more -All work done by Ponsse Ready to work

2008 Ponsse Buffalo Fowarder -17,400 hours -New boom chains -Re- sealed crane pump -Tracks are new -Recently repainted machine -Owner operated and on a job working

2022 Ponsse Bear Processor -2300+ hrs(working) -H8 head -Tires 95% -Tracks 95% -Tight and dry

2022 Ponsse Ergo, 1426 hrs., Heat/AC, 2022 H8 head SN:890721, Nokian Forest King Tires, size 710/45-26.5 at 80%, guards, covers, windows etc. are in good shape, $495,000

2023 PONSSE BUFFALO KING DOUBLE BUNK FORWARDER 6CYL MERCEDES COMES WITH TRACKS ON REAR

2021 Ponsse Buffalo – 4,123 Hours, STK#32046C. $330,000

2007 Ponsse Beaver, CALL

2016 Ponsse Ergo, 12,157 hrs., $259,900

2022 Ponsse Ergo, Low 1154 Hours, Excellent Condition, Tracks All Around, Ready to Work.

2022 Ponsse Buffalo Forwarder, 8WD, Tracks All Around, Excellent Shape, Low 890 Hours, Ready to Work.