Logging Equipment For Sale

2007 Deere 703G Feller Buncher, Equipped with a FS 20 Cutter Saw Head, Enclosed Cab with Heat and AC Engine was rebuilt around 3,000 Hours ago, 15,000 Frame Hours Undercarriage is 75%, Hi/ Low Range needs some work Ready for the Woods. Weight: 45,325 lbs Length: 13' 7" Width: 10' 7" Height: 11'2" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Deere 548G-3 Grapple Skidder, Has Winch, 14,700 Hours, Well Maintained, Tires are 28L x 26, Good Tread, Enclosed Cab with Heat and Air Conditioning, Ready for the Woods. Operating Weight 23,690 lb Overall Length 20.77in Overall Width 9.51ft in Height To Top Of Cab 9.88ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2020 John Deere 640L2 -3100 hours -Tires are good -Tire chains are good -Cable in good shape -Blade extension

2014 John Deere 1910 -Complete Deere engine has 13,000 hrs -27,000 frame hours -Pumps have 7,000 hrs -Drive motor has 7,000 hrs -New Deere transmission has 7000hrs -Slew bearing and brass has 9000hrs -All cylinders except for one steer cylinder replaced in the last 5000hrs -Extension boom replaced and bucket replaced -Newer front window -A/C and heat work good -7 new Nokian tires in the last 4500hrs tires range from 80-99% -Boogies diffs and planetaries drain clean

2014 Deere 1910E Forwarder, Strong Engine, Has 27,000 Frame Hours, Motor Replaced at 13,000 Hours, Pumps at 7,000 Hours, Drive Motors replaced at 7,000 Hours for Preventative Measures, Slew Bearings and Brass replaced at 9,000 Hours, All Cylinders except Steering Cylinders Replaced at 5,000 Hours ago, Extension Boom and Bucket Replaced Newer Front Window Replaced, New Bucket, Good AC and Heat in Cab.7 New Nokian Tires Replaced the last 4.500 Hours, Boggies, Differential and Planetaries drain clean. Weight - 48,060 lb Length - 35' Height - 12.8' Width - 10.15' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 John Deere 548G3 -12k hours -New glass -Tires have less than 500 hours -Tight and dry -Has a set of good chains -Have a brand-new set will sell for an additional Cost Turn-key Unit!!!!

2007 John Deere 2054 Harvester with Waratah 622B Head, 17,768 hours, Recent pump, Recent sprocket and rails, New Waratah computer, runs great. Weight 69,187 lbs Length 45 ft 0 in Width 11 ft 10 in Height 10 ft 10 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1985 Deere 540B Cable Skidder with 7,300 Hours. Open Cab, tight center, tires are 23.1 x 26 with good Tread. Ready for the Woods. Weight: 16,472 lbs Length: 18 ft 8 in Width: 9 ft 6 in Height: 9 ft 5 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Deere 748H Dual Arch Skidder, Winch Included Has 3000 Hours on Rebuilt Engine, 12,900 Frame Hours, 4 NEW TIRES, New Cradle Bushing, Arch Cylinder, 30.5 x 32 NEW TIRES, Enclosed Cab with Heat and AC, All Bushings, Arch Pins, Top and Bottom, New Window Glass Ready for the Woods. Operating Weight: 37,540 lbs Overall Length: 26.49 ft Overall Width: 11.59 ft Height to top of cab: 10.26 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2008 John Deere 1270D Eco III 9 liter H480 head 14500 hours Rubber at 70% Will have new coil put on auto tensioner Runs and operates great

Tires chains 90% New factory engine

LOG DUAL ARCH FOR BOOM, FOR JOHN DEERE 648H OR 748H DUAL ARCH, WE REPLACED MOUNTS ASKING $5000 CONTACT GAVIN 601-410-3416 CALLS ONLY OR TEXT TIM 251-366-3237

AXLES FOR JOHN DEERE AND TIGERCAT EQPT. ALSO DIFFFERENTIAL CASES, PLANETARY, STUB SHAFTS GAVIN 601-410-3416 or TIM 251-366-3237 "AXLES STARTING @ $1,000.00 EACH"

SET OF FAIRLEAD ROLLERS, REBUILT AND READY TO WORK, CONTACT GAVIN 601-410-3416 OR TIM 251-366-3237

4000 JD WINCH, OFF OF 848H SKIDDER, NO WINCH CABLE OR CONTROL CABLE, CALL GAVIN 601-410-3416 OR TEXT TIM 251-366-3237

COMPLETE JOHN DEERE E-MODEL STEERING CYL.SIZE 80X45-326,708 $500.00 plus shipping NEW PRICE IS $2121.72 PART NUMBER AH150081/AHC23098 CONTACT GAVIN 601-410-3416 OR Call/text Tim 251-366-3237

GRAPPLE CYL.PN# AH208835 NEW $2750.00 WE ALSO HAVE TAKE OUT CYLINDERS ON SOME DEERE LOGGING EQUIPMENT STARTING AROUND $1250 EXCHANGE CALL GAVIN AT 601-410-3416 OR TEXT TIM 251-366-3237

SPINDLE AXLE FINE THREAD FITS 548D JOHN DEEREPN#R91844 FOR INFO CALL GAVIN 601-410-3416OR TIM 251-366-3237

2019 John Deere Loader -8000 hours -Kodiak series 3 trailer -Turntable is tight -Tight and dry machine -2021 Csi saw included with loader

2016 John Deere 1910E -16000 hours -Tight machine -New lift cylinder on main boom -Tires about 50% -Tracks included More pictures coming soon