Logging Equipment For Sale

2012 JOHN DEERE 848H SKIDDER Dual Arch Grapple Torque Drive Winch One Owner Low Hour 9K REDUCED Well Maintaned AC Works 35.5 3@70 1@ 50

2022 John Deere 768L2 -250 hours -Serviced Like New! Has another machine same year and hours as well for same price. Stock photo.....Photos coming soon

2014 John Deere 540g3 -7800 hours -Tight center pins -Serviced regularly -Fresh paint

2023 John Deere 1510G -4200 hours -8,000-hour warranty -Tracks Front:75% Rear: 50% -Like New!!!!!!!

2022 John Deere 948l2 -5044 hours working -Winch -Serviced every 250 Hours -Clean inside and out -Tight and dry -Duels come with sale

2004 DEERE 648G III Skidder Hours- 13,948 John Deere 6068H turbocharged diesel engine Transmission: Direct-drive power shift with 8 forward and 7 reverse gears Single Arch Grapple Grapple: Single arch grapple with 10.45 ft² capacity and 9.59 ft tong opening 125-inch Grapple That Has 12.5 Square Feet of Carrying Capacity. Enclosed cab Runs and Operates as It Should New Brakes Woods Ready Delivery is available at the buyer’s expense

One owner well maintained, new rear 35.5 tires, SWEDA axles, winch, serviced and ready to work.

2012 John Deere 3754D Processor -11,743 frame hours -Engine and pumps replaced at 9,000 hours -2014 Waratah 625C head -Undercarriage is good -Pins and bushings are tight

2016 Deere 853M Feller Buncher with 5,500 hours. Operating Weight 67,704lb Overall Width 10.83 ft in Length Of Track On Ground 12.7 ft in Ground Clearance 31 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2011 JOHN DEERE 335D LOG LOADER 12,000 HOURS 6.8L POWER TECH ENGINE BAR SLASHER CLEAN CAB HEAT AND AC GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

John Deere 648GIII cab and contents available separately. Excellent doors with glass.

Just out of the shop. We replaced the saw head with a nice FD55. Saw head checks out. New carbide teeth installed. Cylinders packed as needed. Replaced front valve bank. Pins and bushings replaced as needed. Nice clean cutter. Ready to work. Other tires available upon request.

2017 John Deere 748L, 9300 hrs., 44” rubber, clean, tight, ready to work, $75,000

This 335C John Deere knuckle boon loader operates as it should no problems that we’re aware of. It has 20,965.6 hours on it. It would need some work to be confident in it in the woods but on the yard it’s always done good. If interested in this machine call Gavin 601-394-7796 Tim 251-366-3237 Kameron 251-242-5493 The machine is being sold from State Line, Mississippi, 39362, 467 St Peter St

2017 John Deere 1270G -12,500 hours -John Deere 415 Head -Getting head resurfaced and new head gasket -New EGR cooler -Tracks -Tight and dry

Good condition, no leaks and operated properly when removed. very minor pin wear.

2019 John Deere 648LII Grapple Skidder, Dual Arch, Winch, 4000 Hours, 28L X 26 Tires

Single Arch 6 Sp Torque Drive Winch New Heat/AC 14K Frame Hours Rblt Motor @ 12K New Trans @ 12K New Hyd Pump @ 15K Selling On Like New 24.5 28Ls Also available

2006 JOHN DEERE 748GIII SKIDDER 17,XXX HOURS RECENT TOP END DONE ON ENGINE GOOD TIRES WELL MAINTAINED FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2018 Deere 859M Feller Buncher, Equipped with Quadco 24B 360 Degree Hot Saw, ONLY 7600 Hours, Enclosed Cab with Heat and Air Conditioning, Undercarriage is 75%, Fire Suppression, NEW Crate Engine Tier 4 9 Liter, New DPF and Sensors, Engine is being replaced due to Low Compression in Cylinder, More Pictures Coming Soon, Ready for the Woods. Length 16.1 ft. Width 10.11 ft. Height 12.10 Weight 79,510 Lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.