Logging Equipment For Sale

2014 Tigercat 630E Dual arch Winch 11k hours approx 35.5 tires Runs and operates good

2017 Tigercat 720G Feller Buncher -8779 hours -Have a brand new set of teeth for cutter -Deleted -1 owner strong machine -30.5 tires

USED TIGERCAT LOADER FENDER GRATING. 10 FT X 2 FT LENGTH AND WIDTH. READY TO INSTALL FOR MORE INFO CALL GAVIN AT 601-410-3416 OR CALL/TEXT TIM 251-366-3237

USE COMPLETE TIGERCAT FRONT AXLE FROM A 724D. AXLE HAS BEEN INSPECTED AND IS IN GREAT SHAPE INSIDE AND OUT. 1400 JD AXLE. PART NUMBER BMO74. HAS 1400 JD RING GEAR AND PINION INSIDE WITH 1400 YOKE (1/2 INCH BOLTS) F0R MORE INFORMATION CALL GAVIN AT 601-410-3416 OR CALL/TEXT TIM 251-366-3237

2018 Tigercat 620E -9951hours -Built with 630 grapple -Built with 630 rear end -30.5 tires -60% tread -Heat & AC -Deleted -Tight Machine -1 Owner

USED 720 TIGERCAT TRANSMISSION. PART #BK003 LIST FOR $15,900 NEW USED PRICE CUT TO $2500. NO CORE REQUIRED. FUNK MANUFACTURING MODEL HS1741A,SPEC #YZ14817B, SER# 95022853. CALL GAVIN AT 601-410-3416 OR CALL/TEXT TIM 251-366-3237

724D drive MOTOR ATTACHED TO TRANS WILL SELL TOGETHER OR SEPERATE LEFT drive motor PN#AQ092 $4500.00/RIGHT DRIVE MOTOR PN#AQ093 $4500.00 + shipping Call Gavin 601/410/3416 Call or text Tim 251/366/3237 Located at 467 St. Peter’s st stateline ms 39362

COMPLETE TRANSMISSION WITH BOTH HYDROSTATIC DRIVE MOTORS TAKE OUT OFF OF A724D-0734 MACHINE. PRICE FOR THE COMPLETE UNIT IS $12,500. WILL SELL PARTS SEPARATE LEFT DRIVE MOTOR PART # AQ092 IS $4500 RIGHT DRIVE MOTOR PART # AQ093 IS $4500 TRANSMISSION USED PART 3 9488B IS $3900 THIS ASSEMBLY NEW IS OVER $30,000 CALL GAVIN AT 601-410-3416 OR CALL/TEXT TIM 251-366-3237

2018 Tigercat 630e -5897 hours -Well Maintained -Def System Replaced by Titan at 4900 Hours -Tires - 30% -Working Daily

2010 TIGERCAT H822C TRACKED FELLER BUNCHER 8.3 CUMMINS 5702B TIGERCAT HEAD

CSI Delimber, Tigercat Grapple, Big John Hydraulic Trailer

2020 TIGERCAT 625E BOGIE SKIDDER

2000 Tigercat 630B -8400 hours doesnt know if its correct -Tight and dry -Chains come with -Serviced regulary -Woods ready

MLS Number 11991115 2013 Tigercat 234 Log Loader Grapple Saw Engine rebuild by Tigercat No leaks Has electronics for scale. Needs monitor "In super good condition"

Nice good used take off grapple. Comes with Tigercat OE link and hoses. Previous owner upgraded to a new 2023 grapple.

2019 Tigercat Lx870D -5702 Tigercat head -Cuts 26" -5017 hours -Leveler -Tight and dry Woods ready

2022 Tigercat 234B -2500 hrs -Like new needs nothing -Lights and tires are good -Woods ready

2004 Tigercat 822 -17500 frame hours -3500 hours on engine(8.3l Cummings)and hydraulic pump -UC 90% -Track motors and planetarys have low hours also -Boom is lined bored and has new pins and bushings -New swing bearing and rotary manifold -Has 5400 felling head on it and has a new style saw shaft on it -Cuts up to 21 inch timber More pictures of inside of cab coming soon!!!!

2004 Tigercat 1018 forwarder Swivel Cab -16k hours -HTC computer and control system and hydraulic fine tuning system has 6500hrs since replacement -Articulation rams resealed and one has had new piston and rod done -Tires are getting towards the end probably 30% one is new -Everything works as it should -Air conditioner needs a new condenser unit -Injector pump was replaced 1000hrs ago -Doesn’t use any oil at all ( 8.3l Cummins 24valve) -Hydraulic pump was rebuilt by previous owner around 6000 hrs ago -Changed oil and filters every 150hrs and just recently done a service and all filters -Articulation joint and swivel joint is in new condition very tight smooth no play THIS IS IN AUSTRALIA!!!!!!!

2013 Tiger Cat 630D Skidder -13000 frame hours -200 hours on new engine(with paperwork) -Tires one is @80% others @ 60% -New pins and bushings(with paperwork) -Duels don't come with but could for different price -Woods ready