Logging Equipment For Sale

Just in - Call for details

1997 Timbco 425C Equipped with a CTR Dangle Head Saw with 24" Bar Saw, Rebuilt Engine with 3000 Hours, Undercarriage is 40-45%. Tracks are Good, New Drive Rollers, Enclosed Cab with Heat and AC, Ready for the Woods. Weight 55,235 lbs Length 21'4" Width 9'8" Height 12'2" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Timbco 425EXL 8800 hours, 8.3 Cummins, Quadco 20B 360 head. Engine and 1 pump done at 7000 hrs. Bottom in nice shape, runs and operates as it should. Heat and a/c work. Just repacked accumulator arm cylinders. Saw disc in good shape. Little bit of slack in leveling cylinders but currently on a job and 100% work ready for the next. Get in and go to work. Operating Weight 54,002 lbs Height - Top of Cab 12.4 ft Shipping Length - non tilt 14.6 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2000 Timbco 425C, 9063 hrs., all panels guards, and windows in good condition, Cummins 8.3 engine, w/2 speed Transmission, 28" double grouser style track pads at roughly 75%, Undercarriage at about 50%, Heat/AC, $82,000

Timbco Feller Buncher Cylinders

Poclain swing motor for early Timbco Feller bunchers/forwarders-removed from running operating machine

Timbco/Valmet 425 track groups-reused pads but the chain is in pretty good condition. Does show some wear

2006 Timbco 425EXL with Logmax 7000 Processor Head, Hours are 8,000.00 Rebuilt Computer Measuring Device, Enclosed Cab with Heat and Air Conditioning, Undercarriage is 85% No Leaks, Tight Machine. Operating Weight 54,002 lbs Height - Top of Cab 12.4 ft Shipping Length - non tilt 14.6 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Timbco 425EX -19000 frame hours -22c Quadco 40 degree tilt head -8.3 cummins -D6 undercarriage -Heat/ac -New Bluetooth radio -Clean-fix reversing fan -Brand new track chains, drive sprockets, track hardware, track tensioner w/spring -Could use some tlc

1998 Timbco 425C Feller Buncher, Equipped with a Quadco 20" Saw Head, New Saw Disc with less than 200 Hours, 2400 Original Hours, Undercarriage is 75-80%, New Idlers, Pumps Rebuilt, Drive Motors Redone, New Hydraulic Cylinders Repacked on Saw Disc, Enclosed Cab with Heat and AC, Kenwood Surround Sound in Cab. Weight 55,235 lbs Length 21'4" Width 9'8" Height 12'2" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Timbco 820 center section

Low hour Tracks for 425 Timbco or 725 Timberpro, 28” Pads

Timbco 233 Barsaw with 360 rotate-added tower for additional leverage and stability

Timbco Lateral tilt Barsaw with 33 inch single cut. Professionally reinforced and ready to work.

1999 Timbco 820C Double Bunk Forwarder, Cummins 8.3 Engine with 12,000 Hours, Enclosed Cab with Heat and Air Conditioning, Center Section is Tight, More Pictures Coming Soon Ready for the Woods. Length 32 ft 4 in. Width 10 ft 10 in. Height 12 ft 0 in. Weight 49500 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1993 Timbco 425D -4xxx on meter -Engine been rebuilt -Just replaced both track rails and sprockets have less that 10 hours on them -Idlers and rollers are in good shape -Everything works -Ac/heat -Radio -33” Timbco bar saw head -40 degree tilt -Cameras on the head and behind cab -All bushings are tight Ready to work very well maintained

Caterpillar drive motor to fit older Timbco 425 with Caterpillar final drive

2005 Timbco 445EXL Feller Buncher, Includes a Quadco 22 360 Degree Head, Leveling Cab, Enclosed Cab with Heat and Air Conditioning, Frame Hours 14,000 Engine Rebuilt at 13,700 Hours, New Head, New updated Saw Motor, New Pins and Bushings between Stick and Boom, New Starter, Main Boom Rebuilt, New Fuel System, New Turbo, Rotor Bearings Replaced Undercarriage between 75 and 80% Ready for the Woods. Weight 62,629 lbs. Length 25 ft 4 in. Width 10 ft 4 in. Height 12 ft 6 in. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2000 Timbco 445D Feller Buncher, Cummins 8.3 Diesel Engine, Hours Unknown, Has 43" Bar Saw with 3/4" Pitch, Heavy Duty Cat D-7 Undercarriage is 70-75%, Enclosed Cab with Heat and Air Conditioning, Repleaced 3 Pumps (New), New Control Valve, $15,000.00 in 6000psi New Hoses installed, Ready for the Woods. Weight 65,000 lbs Length 35 ft 6 in Width 11 ft 2 in Height 12 ft 0 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Superior gear box for Timbco 820