Equipment For Sale

These machines are in good working condition and can be inspected under power. Designed to produce a wide range of spiralled wood roping in a continuous length. Square stock is fed into the machine to produce twisting rope. Manufacturer specs (to be confirmed): - Type L.C.B. 600 - .75 kW feed motor - 1.5 kW drawing unit - 1.5 kW right cutter motor - 1.5 kW left cutter motor - Workpiece diameter: min 8 mm, max 60 mm - Workpiece length: infinite - Feed speed: 15-80 RPM - Spindle diameter: 18 mm - Includes (1) cutter on drawing unit used for rope moulding - 3-4" dust ports - Splitter machine to cut dowels in two - (4) different diameter cutters and dies

RENZO BORGONOVO - BL 94-3, ... Vertical Moulding Stacker. This 3-ARM AUTO STACKER has been specially designed to facilitate the loading of mouldings, picture frame strips, and other processed linear parts onto drying racks.It eliminates manual handling of workpieces, which can mar the finish. It also increases productivity and efficiency compared to manual stacking. The machine can work with moulding of the same length or of varying lengths at the same time.Specifications: -- Workpiece Lengths are 4,900 mm (192") Max. & 1,500 mm (58") min. workpiece length, 20 mm min. and 150 mm (6") max. material width cap. -- Stacking Capacity - (20 - 30) pieces/Min. -- Overall Height of 2,200 mm (87"); Overall Width 2,300 mm (91"); Overall Length of 4,000 (157"). -- Work Height at Infeed 860 mm ( 34"); Racks have (11) arms that extend out approx. 39" with 4" in between arms.Operation: -- Automatically loads just-painted mouldings onto air drying rack. -- Process: As moulding exits Coater, it is moved by belt conveyor to (3) arms, which lift the piece up and over the top of the Stacker Station; coming down the other side, it places the moulding onto (3) arms. A belt conveyor transfers the piece onto the 11-tier drying cart. -- Lifting can be triggered by electric photo-eye to determine the position of off-feed arms (arms move down as each tier of the rack is filled) and place moulding on the rack (indexing back-to-front).This Stacker comes with (1) rack; additional racks are available, priced at ...$ 1,950 each

RENZO BORGONOVO MVS-2500 Automatic Sanding and Buffing MachineFOR LINEAR FRAMES AND PROFILES - Sanding and buffing of frames, rods, ledges and fitting parts of veneer, solid, raw or varnished wood, etc. (processing of 3 sides for each pass). -- Advancing speed electronically variable by inverter: 10 TO 50 M/MIN. -- Total power: kW 10,5 (14 HP) -- Compressed air: Atm 6 -- Total exhaust capacity; m3/h. 2800 (25 m/sec.) -- Working height: mm. 10 min. mm. 100 max. -- Working width: mm. 20 min. mm. 200 max. -- Working length: mm. 1200 min.DISC SANDING UNITS TYPE “SCOTCH BRITE"; (N° 4) -- Power motor: 3 HP (2.2 kW) -- Rotation speed: 1400 RPM -- Disc sanding unit holder shaft diameter: mm. 30 -- Spindle-disc sanding unit connection flange diameter: mm. 76 -- Disc sanding unit diameter: mm. 200 max. -- Disc sanding unit height: mm. 100 max. -- Dust suction hood diameter: mm. 100 -- Extraction rate: m3/h. 700 (25 m/sec.)

Renzo Borgonova Rope Moulder and Splitter

RENZO BORGONOVO - SP 6P, ...6-Gun Spray Machine with 3/4" - 12" width cap.3-1/4" Max, part thickness and 32" min. part length. Standard specifications: -- (6) Gun mounts made from aluminum rods and HDPE mounting brackets, for connections for (6) HVLP automatic spray guns, and (1) dual diaphragm fluid pump. (Guns and Pumps are not included). -- Complete with: Teflon coated recovery cabinet for each spray station and easy rollout feature, front access door with large viewing window & gas shock support arms. -- (2) Paint circuits with (3) spray guns each (guns not included).Features: -- Machine is operated with a central control panel and gun timing is controlled by a PLC that times the spray guns in relation to the length of the work piece and feed speed. -- PLC Records the number of workpieces and total linear feet processed in session. -- The machine is set up with infeed & outfeed conveyors that operate at any speed between 2- - 100 mpm (65 - 325 FPM) and is made up of Antistatic and Antisolvent belts and intermediate steel rollers between Spray Stations. -- 300mm (11.8" Dia.), 1.5 HP exhaust fan rated at 4,000 cbm/Hr. -- This Sprayer integrates easily into any line whether as a primary unit or as an intermediate step. -- Overall length is just under 10'.The Machine is priced with no guns or supply installed, these will need to be added by the buyer or a separate quote can be requested for guns and supply pumps.Working dimensions: -- Length: Min. 800 mm / max. infinite. -- Width: Min. 15 / 300 mm. -- Height: Min. 15 mm / max. 100 mm. -- Height of worktable: 900 mm. -- Compressed air consumption - NI/min 1,500 – 2,000. Optional: InHand Networks Industrial Router Overall machine dimensions and weight Teleservice module for remote troubleshootingPrice includes the following options: Stainless Steel carriage Teleservice module for remote service.PRICE IS FOB EAST COAST PORT, INLAND FREIGHT WILL BE QUOTED.Overall size: 3,000 x 2,900 x 2,220 mm and 800 kG (I,750 Lbs).

1999 Re-Tech IS4820 Trommel Screen, 10,134 hours, 1/2 screens. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1998 Retech Trommel Screen -3800 hours -John Deer Powered -Central Drum for easy screen mesh changes -Additional fines conveyor included -Stationary Tip Grid included -7'x23' drum -48" feed conveyor -16"x18' under conveyor

2001 Retech 620 Prospector -3800 hours -Screened dirt -Tight and dry -Belts good -Tires good Ready to work!!!!!

1998 ReTech 727 Trommel Screen -3500 hours -Deere 4045T engine starts and runs excellent -Painted and sand blasted -7’x27’ Trommel drum in excellent condition -Currently set up for screening 3/4” wet / damp loam or compost and Mulch -NEW 1” AR punch plate screen in first 2 drum sections -NEW 1/2” square screen in second 2 drum sections -All Hydraulic Hoses are new or less then 2 years old -Belts, rollers, bearings, tail and head pulleys all in excellent condition -Sale Includes (4) Extra (2 drum sections) of new 1” AR punch plate -Powerscreen 50’ Radial stacker discharge belt with new belt, new drive pulley, and new quick connect fittings -Stacker belt height is hydraulic adjustable -All 8 New tires, brakes are in good shape and work excellent, no air leaks -2 owner machine -Very well maintained -Ready to screen

Features - Easy to use main controls - Quick access for changing 3 or 5 inch wide rolls of film or adjusting film stretch - Vigor PLC for reliable operation

Rex 600X Firewood Processor c/w 1 Cord Hopper incl Hydraulic Drive Infeed Belt, 37hp Yanmar Diesel Engine and 16' Elevator with Griddle & Tray

The 650 C circular saw performs extremely well on a wide range of logs – especially dirty, dry, bent logs, or those which have various flaws such as rot in the centre. The circular saw will handle logs from 5ft – 21ft long, and up to 25" diameter. The 28 tooth x 5ft diameter Tungsten tip blade is driven by a fuel efficient 70hp Yanmar 4TNV98 diesel engine – cycle times have been recorded at 10 – 12 cuts per minute for 15 – 20" logs.

Rex 900 Firewood Processor Std Specs include - 48 hp Deutz Diesel Powerpack 1 Cord Infeed Hopper with moving floor 35" live infeed deck with walking floor block feed, 5 tooth blade 31' elevator with Hyd Winch, mounted on a dual axle chassis

Actual Photo Dual Axle Trommel with the ingle Grade, dual hyd motor drive, 1 cord Hopper to feed Trommel, 31ft outfeed elevator with hyd winch 1 x 20ft & 1 x 10ft waste conveyor, on dual axle chassis c/w hyd leg jacks, 24hp diesel power pack Single Grade Trommel Drum - 1-1/4" Gaps

Used 64’+ Vibrating conveyor 64 foot natural frequency conveyor 3ft width vibrating conveyor Approximat total shipping weight 14,000 lbs Prior use of the conveyor was inside of a building Additional photos and details are available Contact us for a price and shipping rate.

Used Timbco and Valmet track feller buncher track drive pumps available in stock

Rexroth swing motors and gear boxes available to fit Timbco, Valmet and Komatsu Track feller bunchers

Rexworks Maxigrind 425 Portable Horizontal Grinder w/Cat Engine, Tandem Axle 5th Wheel Trailer

(2) Rigma Roll Coaters available Model RR-W4CCB 1350 Max capacity

RILESA UNI-X 2200 FEED THUR CNC BORING MACHINE W/4-SIDE DRILLING, in one pass. -- Specifications:Working Capacity; 230 mm - 2,200 mm (9' - 86.6") Length, 20 mm - 250 mm ((0.78" - 9.84" width, 10 mm - 60 mm (0.39" - 2.36") thickness.Capacity: up to 900 parts/hour without cross drilling. -- Features:One-man operated. 4-side drilling, in one pass. With Rilesa UNI-X drilling machine you get precision, quality and extreme high capacity. It is well suited to both small and large dimensions. It has short set up time and minimal maintenance. -- Polyurethane an guides ensure gentle handling of components. The restraining clamp automatically adjust to component width ensuring correct location to the zero point. -- The drilling boxes are designed for high speed drilling, 4500 RPM. The tool inserts can be chosen Between direct or snap assembly. Special drill boxes can be manufactured to specific customer requirements. -- Assembly of drill boxes takes place with a snap function and is simply locked with screw. The drill box can be freely turned between 0 and 90°. In the outer positions there are stops. -- The drill groups unique design gives a high degree of adjustment flexibility. The center distance between groups is 95 mm. Pneumatic over hydraulic drill feed. Drill speed, 4000 RPM. -- The components are fed in pneumatically up to the reference stop and locked securely in this position. A unique safe regulated system makes sure the component is in place without pressmark. -- The operator uses signal lamps to make adjustments. The operator manually moves the drill groups into position checking the lights. Yellow to green = Tolerance. -- The machine closed design with built in dust extraction gives the perfect place to work. Notice the sturdy construction of the machine body. -- Loading of components is very easy by pushing the stack in through the brushes. The machine components are transported gently back to the operator. The conveyer can run continuously or in step mode. -- For long components support elements can easily be added. They are located with a simple clamp and ensure straightening of the workpiece. -- The machine can be delivered with sideways displacement of the drilling group. The drilling group displace up to 100 mm, this function combined with programming of the drilling, do difficult drilling in one passage, possible. -- The control system is integrated in the back of the machine, well protected against dust. There is room for future expansions to be added. -- Hopper / Magazine:Pneumatic magazine with ergonomics and user friendly access. Automatic fixation to the zero point by a pneumatic counter clamp with polyurethane and nylon covering for careful handling of the component. -- Return conveyor with an adjustable catcher tray, build-in clamp cylinder mounted at each end, for flexible and safe clamping of the components, adjustable catcher tray. -- Operator Interface:Advanced 15"; color TFT touch screen control system where