Equipment For Sale

30” x 165’ Concave Belt, Conveyor/Shaft Mount Drive

30' Concave Belt Conveyor with 24" belt

32" Concave Belt Conveyor

7,000 Square feet of cloth Approx 70,000 CFM (2) 37" Positive Fans: 150 and 125 HP Ready to load on your truck!

CONCEPT-AIR - S12, Primary Filter Bag House Dust Collector System complete with the following components and features: -- Fan model HDR32 (CONCEPT AIR); belt driven with 100 HP Drive Motor. -- Material Discharge Screw Conveyor followed by a Rotary Air Lock. -- Return Air with: Summer/winter diverter. -- Shell: 12' Dia.; houses (xxx) bags of size 8" x 120" Filter Bags; total of x,xxx sq/ft Filter Cloth. Cleaning is with shaker system?. -- (4) Door Explosion Venting. -- Support Structure. -- Catwalk with Access Ladder. -- Professional removal and loading is available. -- NOTE: More information to follow.

CONCEPTION CRP-180 Short Block Feeder Infeed ConveyorSpecifications: -- About 4 m long X 1.2 m wide, 2-ply rubber belt, friction back with Photocell for automatic operation -- Short Block Feeder; Blocks to be 25mm longer than width -- 14' rotating carousel with adjustable speed via VFD with Motorized wheel to avoid blockage -- Exit opening adjustable to the block width -- 200 mm x 7m long belt conveyor to carry the blocks to index rolls; Servo indexer controlling the flow powered by an electric motor; Speed-up belt powered by an electric motor -- Wane System: Scanner to detect wane integrated in conveyor -- Display screen to show wane detected; Kicker to kick blocks that are not in good orientation -- Conveyor to return it into the spreader belt conveyor -- Automatic Operations

750 kw Generator This was owned by a hospital. Seller purchased both units and never used them.

PRICED REDUCED Cone 2-Saw Independent Arbor Optimized High Speed Edger, 4/4 to 4" runs 14 boards per minute W/ Tailing Device W/ Innovec Generation III Controls W/ Lots of Spare Boards & Parts to Keep Software Running, Includes MIC Unscrambler, with even ender up top. Scanning Bar and hi-speed indexible infeed and tailing belt outfield. On the ground and ready to load. Taken out with Videos and instructions to re-install. A must. Ref #131

OSI Low Profile 30-degree Slant Canters with Thumper rolls and sharp chain. Call for pricing

CONQUEST 1-23H CONSTRUCTION / LINE BORERUSA-Made 46-spindle Horizontal/Vertical Boring Machine.Specifications: -- (2) 2 HP BALDOR Motor to drive a helical gear head with spindles on 32 mm centers. One head with (23) Spindles in the vertical plane and One head with (23) spindles in the horizontal plane. -- Pneumatic head movement to reduce operator fatigue. -- 20-1/2" x 36" Cast iron front table.Complete with: -- 98" Back fence with repeat stops. -- (2) Pneumatically operated index pins & (2) pneumatically operated holddowns. -- Collets that accept 10 mm shank bits. -- Bit requirements of 10 mm shank. -- Foot pedal control....$150.00 crate charge.

CONQUEST 1-23H Horizontal 32 mm Boring Machine;Specifications: (1) 23-Spindle horizontal boring head, 2 HP "BALDOR" motor, helical gear driven spindles spaced on 32 mm centers, 3,450 RPM; cast table. -- Equipped with: Pneumatic head activation, side fences. -- Complete with: (2) Pneumatically activated holddowns and foot pedal. NOTE: This unit has 2 sets of arms. All the screws have been replaced for the drill bits. Ready to go to work!

CONQUEST - 2-46: Double Row Line Borer -- (2) Rows of (23) spindles; drilling depth up to: 2-3/8"; drills from bottom-up. -- Specifications: (2) 2 HP BALDOR Motors; 3,450 RPM spindle speed.Adjustable opening between heads from: 5-1/2" - 27" w/mechanical digital readouts. -- Equipped with: (2) Pneumatic holddowns; 120" back fence with: (3) Large flip stops; (2) air index pins for sequence boring long side panels; table height 37-1/2". -- Complete with: 10 mm Collets; position indicator; air/electrical controls; foot pedal for clamping & boring cycle. -- Includes: Full set of 5 mm bits.

Hydraulic pump power unit, 3500 psi, 29 GPM. 100 gallon tank, 30 hp Continental Pump model: HPVR-29B35-RF-O-1R-A 100-gallon Tank MFG: HTS/Hydraulic Technical Service, Eugene OR. Hydraulic power pack 3,500 psi. Pump P/N : 1021823 Pump Disp. 3.97 in3/rev 3500 PSI max pressure, GPM: 29/30? 4 Nachi Solenoid hydraulic valves 30 HP Toshiba motor: 230/460,1770 RPM, Frame 286TC, TEFC, Duty Cont., Inverter Duty, VPWM, Severe Duty, Ins. F., Date: 2014 on tank Tank Heater: Watlow, 1ph, 1500 Watts, 240/480 volt, Prior use and stored inside a building. Approximate Shipping dimensions: 54”W x 54” L x 84” tall, 1,900 LBS. a pallet/crate will be built at NO cost for shipping, tank has been drained of oil. Contact us for a shipping rate

Continental Automatic Gas Fired Boiler S/N L 196710

Hydraulic Power pack with 2 Hydraulic pumps 30hp & 7 1/2hp, oil cooler & Accumulator 30 HP & 7 1/2HP pumps 30 HP Continental Pump 3,500 PSI ( 241 bar), disp 2.62 in3/rev. P/N: 259012 / HPV-20B35-RF-O-1R-B VELJAN 7 1/2HP pump with Baldor 7 1/2hp, 2HP Baldor motor oil cooler Contact us for a delivered price Wooden pallet/crate will be provided for shipping

MLS Number 10679774 Cook Grade Lumber Resaw 30 HP Will saw 16" wide No return 1 1/4" to 2" blades

COOK 2 SAW EDGER-BOTH SAWS SLIDE W/9' INFEED ROLLCASE, 20HP MTR & 7 1/2 MTR S/N 3682981

Cook 6" x 48" 2 Saw Edger. W/ in & out feed.

2021 Cooks HD3238 Sawmill Only 70 hours Fully hydrualic 32" log diameter capacity Roll off roller and squaring arm Extra box of blades STOCK IMAGE. PHOTOS COMING SOON

1988 Cooper End Dogging Scragg Mill with 48" Diameter Blades & 125HP Motors S/N CM-6076. Out and ready to go.