Klamath For Sale

HMC 3 Head Block Carriage

HMC V206H Rosserhead Debarker S/N 1147-79

HMC Line Bar Unit

HMC AC 50 Serial# 606-96 Cab, Set Works, 3 Head Block Carriage, Rails & Panagraph

HMC AC 50 3HB Carriage (Linier Positioning), Track and Panagraph

5' x 5' HMC CM48 Chip Screen

HMC 2-Saw Trimmer Model ET-10,;Complete with the following features: --16′ capacity. --Push Button Setworks. --Left hand (feeds from left to right). --Cuts up to 8″ thick. --Belt Conveyor for waste.NOTE: Removed from service and it was running just fine at the time of removal. Stored outside.

HMC 4800 horizontal resaw. This saw is made by Pinheiro for HMC, quality and speed 4" -5” band, includes. New electronic setworks, (no conveyors), excellent stand alone machine, Great for relcaiming Slabs (ref #200)

HMC V-2110 Slant Track Debarker w/60Hp Motor on Head, Onboard Hyds, Controls & Wood Constructed Cab S/N 1827-05 w/Patz 50' Barnsweep, Electric Drive, Counter Clockwise Rotation (20' Section Has A Cover), 10' 8" x 30' 4 Strand Log Deck w/Stop N Load, Hyd Drive, Attached Catwalks, 11" x 27' Ladderback Chain Conveyor w/Hyd Driven Gear Drive & 25Hp Hyd Power Pack

Slant track debarker with cab. New teeth on wheels.

HMC 4 head-block circle mill, complete mill package, includes husk w/ top saw, carriage drive, operator cab, and all controls, price includes BRAND NEW set-works and mill gone through shop and ready for production

chain type log turner, sized for 40" carriage, hyd drive, good working condition

HMC 3 strand log deck, H-78 chain, stop-load for debarker, 10' 6" wide x 19' long, Tulsa Winch electric drive, very good condition

HMC AC40 Carriage (Sawmill) Rebuilt AC40 Board Dog Carriage, 4 head blocks, 42” opening, set shaft carriage. Factory rebuilt with new equipment warranty. Photos are reference only

HMC HD40 Carriage Drive (Sawmill) Rebuilt HD40 Carriage Drive, 50hp motor, closed hydraulic system, Factory rebuilt with new equipment warranty. Photos are reference only

HMC ET10 Trim Saw Rebuilt ET10 Two Saw Trimmer. LH Construction, 6’-16’, Updated PLC setworks and starter panel. Factory rebuilt with new equipment warranty. Photos are reference only

HMC MDS-50 Left Hand Drop Saw Trimmer For trimming Boards, Cants, or Ties up to 8" thick and will pass 10" Material. Feed Chains are 81X chain driven by a 3HP Variable Speed Motor with hold downs, each 24" saw is belt driven by 10 HP motors, starters, and fuses are mounted to the Machine in a Nema 12 Enclosure. 0',2',8',10',12',14', and 16' saw units, set up to pass 20' long material. Automatic length trimming with manual override is controlled by programmable control, powered even-ender rolls with a 2 hp drive, and includes one stationary stop gate. Front, back, and top guards are included, and an Automatic shutdown if a door is open while the machine is running. Includes spacers to raise the machine. 360/440 volt

HMC RH 13' Carriage MDL AC40 w/Elect, Air, Tong Dog, 48' Track, Forestall Husk, 24" x 7' Belt w/Top Saw, Includes Cab & Mudata Comp Setworks, Control Box, Transformer & 40HP MTR, Forestall 3 Saw Verticle Edger w/40hp Elect Mtr., 150HP MTR, Forestall Hyd Carriage Drv Feed Works, Chain Type Hyd Log Turner w/Hyd Stop & Load w/Nose Skids, 22" x 18' Power Rollcase, Allen Bradley 150HP Starter, Square D 600 Vac 400 Amp 350HP Disconnect, (2) Square D Size 3 Combo Disconnect/Starters, Allen Bradley Size 2 Combo Disconnect/Starter, Steel Catwalk Around Saw.

HMC AC40 MM-10 Modular Mill Includes Track, Carriage, Cab, Controls, Husk, Top Saw & Carriage Drive S/N 281-83. Out and Ready to Ship

rosser head style, all hyd. drive, 36" dia. log capacity x 12' long, very good condition