Equipment For Sale

2006 Diamond Z 5000 -10,200 hours -Belts good -Mill has been serviced -Machine is serviced regularly Turn key unit if the machine needed it the issues has been fixed.

2016 Diamond Z DHZ 7000 -8800 hours -C-32 -Belts good -Mill good -Serviced regularly -Turn key unit Parts have always been changed if needed

2001 Diamond Z 1463B Tub Grinder, Frame hours are unknown at this time. 400 hours since 3412 rebuild. Everything runs as it should. Grates supports will need to be address as some point. Weight 98,000 Length 46' Width 11'11" Height 14' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Diamond Z 1463B Tub Grinder, Cat 1050hp, 1000 hours on remain engine and rebuild, Radio remote, Magnetic head pulley. Weight 98,000 lb Length 46' Width 11'11" Height 14' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2001 DIAMOND Z 1460B-15 TUB GRINDER REDUCED All new joy couplers new tires new hoses cat 3412 engine remote everything works currently used 1-2 times per week

Hex 45" Whole Log Metal Detector

Diehl SL 50 Straight Line rip saw with adjustable infeed speed controller 15HP 480 volt 14” saw blade feed chain 8 ¼” wide, Table dimensions: 80” x 57” Serial # 65M1297570 We also have available a Diehl SL 52 in our inventory A wooden pallet/crate will be built for shipping at no charge Contact us for price including freight. Can test run saw with video upon request. Stored in our warehouse for prompt delivery.

Diehl SL50 Straight Line Rip Saw 240 volt 3 phase Variable speed control SN: 51108

MLS Number 10682943 DIEHL SL52 STRAIGHT LINE RIP SAW Bottom arbor 4-1/4"X8-1/2" capacity 15 HP 3,545 RPM arbor drive motor Infeed speed up to 200 FPM Serial# 10/88M-5312-4728 Voltage: 460/60/3 phase Amps: 21.7 Wiring diagram # 2-9000-0026 Was removed from service in November 2020

The seller has upgraded to a new machine and no longer needs this rip saw. This machine still runs a few times a week at the shop. 15 HP Motor 2 HP Feed Motor 2" Arbor 16" Max blade capacity Chain drive

Diehl Straight Line Rip Saw

DIEHL - SL 50, ...Straight Line Rip SawSpecifications: -- 15 HP - 3,450 RPM Direct drive arbor motor, 2" dia. arbor. -- 16" Blade cap., 2-1/2" max. depth of cut. -- 10" Min. part length. -- 49" Width of table to the right of blade & 26-5/16" to the left. -- 57" x 79" Tabletop size. -- 2 HP Feed drive, feed speed of 65 - 195 FPM.Equipped with & Features: -- Twin chain drive. -- Automatic dip lubrication. -- Top pressure system with: (6) Full width rollers & (2) split rollers over blade. -- Rip fence. -- Push buttons and magnetic starters. -- Floating rip fence. -- Self-adjusting antikickback fingers. -- Full overload & undervoltage protection.

DIEHL - SL-52W: Straight Line Rip Saw (Wide Arm Model)15 HP Main saw motor; 2" arbor.The chain on this "SL-52 WA" has" 90% + Chain life or better left. - Just look at the pictures! This is a glue line capable machine.Specifications --Table measures: 95″ x 79″; fence locks 53″ to the right of the blade with 56" total of clearance from the right of the blade to the upright supports. -- 4-1/4" Max. depth of cut. -- Stock thickness cap.: 1/8" Min. to 4-1/4" max. -- Everything raises & lowers throughout its range very easily.Feed -- 2 HP Variable speed feed 65 to 195 FPM. -- Automatic Lubrication System. -- Automatic chain oiler.Equipped with & Features: -- Spring loaded rip fence. -- Anti-splinter kickback fingers. --Front push button controls -- Laser light.

Diehl Model 75 Straight Line Rip Saw Chain is in good shape. Left and right chains are worn evenly. Includes: Laser Variable Speed: 4-speeds

DIEHL - 55" - Straight Line RipsawSpecifications -- 15 HP - 3,450 RPM Direct drive arbor motor. -- 2" Dia. arbor; 18" blade cap.; 4" max. depth of cut. -- 12" Min. part length. -- 21-1/2" Width of table to the right of blade & 30" to the left; 43" table length. -- 2 HP 4-Step feed drive; 30 - 50 - 75 & 120 FPM; twin chain drive.Equipped with & Features -- Automatic dip lubrication. -- Top pressure system with: (6) Full width rollers & (2) split rollers over blade. -- All cast iron machine. -- Runs very nice. -- Complete with: Rip fence.NOTE: Conveyor not included.

DIEHL SL-55 Straight Line RipsawSpecifications: -- 15 HP - 3,450 RPM Direct drive arbor motor, 2" dia. arbor, 16" blade cap. -- 4" Max. depth of cut, 12" min. part length -- 20-1/2" width of the table to the right of blade & 30" to the left, 66" table length.Equipped with & Features: -- 3 HP 4-Step feed drive 30 - 50 - 75 & 120 FPM; -- Twin chain drive. -- Automatic drip chain lubrication. -- Top pressure system with (6) full-width rollers & (2) split rollers over the blade.

DIEHL - SL-52, Straight Line Rip SawSpecifications: -- 15 HP Motor, 3,600 RPM belt driven, fixed 2" arbor. -- 14" to 18" Blade diameter. -- 4-1/4" Max. thickness with 18" blade diameter. -- 2 HP - 1,800 RPM feed drive, variable feed speed from 65 to 190 FPM. -- 25" Throat depth to right of blade, 24" of table to left of blade. --Table size: 61" x 80".Equipped with & Features: -- Cast iron pressure bar arms with ball bearing rollers. -- Adjustable rip fence. -- Self-adjusting antikickback fingers with control cam. -- Automatic lubrication of feed chain & race. -- Full overload and under voltage protection. -- Manual arbor brake for safety with interlock.Shipping Dimensions 7-1/2' L x 7' W x 5-1/2' H; weight of 5,000 Lbs.

DIEHL STRAIGHT LINE RIP SAW SL30-19 Specifications: -- 10 HP Motor - 3,450 RPM belt driven fixed arbor, 14" - 16" blade dia., 2-1/2" max. thickness; 1.5 HP - 1,800 RPM feed drive, single fixed feed speed of 60 FPM. -- 19" Throat depth to right of blade, 18" of table to left of blade, 56" long table, cast iron pressure bar arms with ball bearing rollers, 60" guaranteed glue joint accurate. -- Multi-V, fully machined, pyramid corrugated single feed chain.Complete with: -- Adjustable rip fence, self-adjusting upper anti-kickback fingers with cam height control & lower anti-kickback fingers in table. -- Pressure beam outfeed guard with pivoting side pressure, automatic pneumatic lubrication of feed chain & race. -- Full overload & under voltage protection. -- Automatic brake for arbor protection, and pressure bar curtain. Options: Diode laser & mounting bracket; 15 HP motor, 20 HP motor.

DIEHL SL 65-19 Straight Line Rip Saw: 20 HP Motor - 3,450 RPM belt driven fixed arbor, 14" - 18" blade dia., 4-1/2" max. thickness; Features: -- 3 HP - 1,800 RPM Feed drive, variable feed speed of 70 - 200 FPM. -- 19" Throat depth to right of blade, 18" of table to left of blade, 78" long table, cast iron pressure bar arms with ball bearing rollers, 60" guaranteed glue joint accurate. -- Multi-V, fully machined, pyramid corrugated single feed chain. Equipped with: -- Adjustable rip fence, self-adjusting upper anti-kickback fingers with cam height control & lower anti-kickback fingers in table. -- Pressure beam outfeed guard with pivoting side pressure. -- Automatic pneumatic lubrication of feed chain & race. -- Full overload & under voltage protection. -- Automatic brake for arbor protection, and pressure bar curtain. Option: Diode laser & mounting bracket, please add ...$ 1,745.

DIEHL - SL-52, Straight Line Rip SawSpecifications: -- 15 HP Motor, 3,600 RPM belt driven, fixed 2" arbor. -- 14" to 18" Blade diameter. -- 4-1/4" Max. thickness with 18" blade diameter. -- 2 HP - 1,800 RPM feed drive, variable feed speed from 65 to 190 FPM. -- 25" Throat depth to right of blade, 24" of table to left of blade. --Table size: 61" x 80".Equipped with & Features: -- Cast iron pressure bar arms with ball bearing rollers. -- Adjustable rip fence. -- Self-adjusting antikickback fingers with control cam. -- Automatic lubrication of feed chain & race. -- Full overload and under voltage protection. -- Manual arbor brake for safety with interlock.Shipping Dimensions 7-1/2' L x 7' W x 5-1/2' H; weight of 5,000 Lbs.