Equipment For Sale

Weinig Unimat 22AL Electrical Panel

WEINIG UNIMAT GOLD Feed Through Moulder6-Head (B-R-L-T-T-B), working cap. 9-1/16" x 4-3/4".Specifications -- Spindle Configuration: 10 HP Bottom, 10 HP Right, 10 HP Left, 15 HP Top, 20 HP Top, 10 HP Bottom motor -- All Spindles are 1-1/2″ diameter; 6,800 RPM on all Spindles. -- 5.5 HP Inverter Controlled Variable Speed Feed 16 to 78 FPM; CARDAN Drive System. -- 78″ In-feed Straightening Bed -- Mechanical Digital Readouts on all Spindles -- DIGISET Readouts on Left and Top Spindles. -- Mechanical Readouts on Chip-Breaker and Pressure Element of Top Spindle; Pneumatically Pressurized Feed Rollers. -- (2) Powered Table Rollers in Machine Bed (One Between Top Spindles and One at Out-feed). -- Motorized Up/Down Adjustment of Feed Beam. -- Equipped with & Features: -- Chrome Table Plates -- Central Lubrication Point -- All Spindles Equipped with Mechanical Brakes -- Manual Waxilit Pump -- Sound & Safety Enclosure.

WEINIG UNIMAT 10005-Head (B-R-L-T-B), 9-1/16" x 4-3/4" cap. -- Head sequence: Bottom 10 HP, right 15 HP, left 15 HP, top 25 HP and bottom 20 HP motor. -- WEINIG "Memory Re-Dial" system with storage of (100) separate profiles; electronic LED readouts for all spindles. -- Spindle dia. 1-13/16" with the following cutterhead speeds; Spindle #1 at 6,000 RPM, spindles #2 - #5 at 7,000 RPM with high precision bearings & mechanical spindle brakes; adjustment of vertical spindles 3-1/8" axially. -- Electronic LED readouts for chipbreaker & pressure elements for top spindles. -- Cutting circles 8-7/8" on spindles #2 - #5; vertical spindles with adjustable table plates to cutting circles, hardened infeed bed plates before-and-after 1st bottom head. -- Motorized feed beam adjustment; variable feed speed from 20 - 118 FPM, 10 HP inverter controlled Cardan feed drive, overhead feed wheels with pneumatic pressure. -- (1) Powered table roller in bed at outfeed. -- Infeed straightening table 2 M (6-1/2') with adjustable fence and adjustable table at outfeed. -- Equipped with: Central location of lubrication points, side pressure roller at infeed, manual waxilit pump, and (2) lights inside sound enclosure. -- Includes Set-Up Stand.Note - Machine is in good running condition, but electric brakes are not functional, but does not affect running or performance.

WEINIG - U 1000, ...Feed Through Moulder6-Head (B-R-L-T-T-B); working cap. of 9-1/16" x 4-3/4".Specifications -- Head sequence: Bottom 10 HP; right 15 HP; left 15 HP; top 25 HP; top 20HP, and bottom 20 HP motor. All spindle motors with mechanical brakes. -- WEINIG Memory Redial system allows for storage of over (200) separate profiles; electronic LED readouts for all spindles, chipbreakers and pressure elements. -- Spindle dia. of 1-13/16"; spindle #1 at 6,000 RPM, spindles #2 - #5 at 8,000 RPM with high precision bearings; adjustment of vertical spindles 3-1/8" axially. Feed: -- Motorized feed beam adjustment with independent adjustment of top head; cutting circles 8-7/8" on spindles #2 - #5. -- Variable feed speed from 20 - 118 FPM; 10 HP inverter controlled Cardan feed drive; overhead feed wheels with pneumatic pressure. -- Vertical spindles with adjustable table plates to cutting circles; hardened infeed bed plates before & after 1st bottom head. -- (1) Powered table rollers in bed at outfeed. -- Infeed straightening table 2 M (6-1/2') with adjustable fence and adjustable table at outfeed; chromed tables and fences. Central location of lubrication points; Electromagnetic interlocking of safety hood, manual WAXILIT pump. -- Complete with: Axial adjustment of feed roller opposite left spindle and (1) light inside sound enclosure; all setup tools, manuals and spacers.

Raimann Flexirip 6200 Saw System is still under power until the end of January 2025

WEINIG P-22 Feed Through Moulder5-Head WEING Molder with a working cap. 9-1/16" x 4-3/4".Head sequence: -- Bottom 10 HP, right/left 10 HP, top 15 HP, and bottom 10 HP motor. -- Spindle dia. 1-1/2" with cutterhead speed of 6,000 RPM; mechanical spindle brakes all spindles. -- Mechanical digital readouts on all spindles; Digiset readouts on left & top spindles; mechanical readouts on chipbreaker & pressure elements of top spindles.Feed: -- Controlled feed speed from 16 - 78 FPM, 5.5 HP feed drive. -- Infeed straightening table 2 M (6-1/2"), fences, side holdover roller mounted to infeed table, manual Waxilit pump.Features: Reduced distance feed roller, protection against backlash when splitting, central location of lubrication points, and sound/safety enclosure. -- It comes with a large assortments of cutter heads 9 inch - 2 inch approximately (30) and it includes a lot of different knives for each of the heads

Weinig Powermat 700 Moulder Measuring stand, tooling and spare parts as pictured Never connected to power...ready to load!

Weinig Powermat 700 Eagle, 1-1/2” spindles. Measuring Stand, tooling and spare parts as pictured

WEINIG UNIMAT 23 ATS, 6 HEAD MOULDER6-Head (B-R-L-T-T-B), working capacity 9-1/16" x 6" profiling. -- Head sequence: Bottom 10 HP, right & left by 15 HP, top 20 HP, top 15 HP and bottom 15 HP motor; Spindle dia. 40 mm with cutterhead speed of 6,000 RPM. -- WEINIG ATS (Automatic Tool Setting), Storage for up to (99) profiles; automatic positioning (radially) of left and top spindles (linked). -- Mechanical digital readouts on all other spindle adjustments for both axis, radial adjustment only on 1st bottom head. -- Motorized feed beam adjustment with independent adjustment of top heads, Receding chip breakers on left and top heads. -- Feed motor 7.5 HP, variable speed 18 - 118 FPM, overhead feed wheels with pneumatic pressure, (2) powered rollers in machine table. -- Large tool cutting circles, table plates adjustable to the cutting circle on vertical spindles with axial adjustment of 3-1/8" for multiple profiles. -- Infeed straightening table 2 M (6'6") with adjustable fence & adjustable outfeed table. Side pressure roller mounted to infeed table. -- Includes: Central lubrication, full sound/safety enclosure, manual bed lubrication pump.

270 Ton WEMHONER - 110"; L to R x 59"; F to B Down-Acting Hydraulic Press: Model KT-M-15/28-240. Clearance between frame is: 126"; L to R x 37"; F to B. -- Nominal bed: 110"; x 59";. -- 4-Clamp Cylinders are single-acting: Approx. 8"; Bore; 6"; dia. rods; approx. 10"; max. stroke. -- (1) Center traversing cylinder: Approx. 3" bore with a 1-3/4" diameter rod (approx. 16 max. stroke). -- Max. daylight: Approx. 16";. -- Approx. 28-1/2"; Operator height. -- Guided with rollers at each corner and (2) gear & rack guides. -- Slide and bed: 4" Thick; self-contained Hydraulic System: -- (2) Reservoirs: Approx. (14) gallons each. -- 4 kW Motor: Approx. 5 HP; 1,800 RPM, 440 Volts, 9.15 Amps. -- Pump: Type "R60A; max. 350 Bar, etc. -- Speeds: Approx. 99 IPM fast down; 2.0 IPM Pressing adj; 99 IPM fast up. -- NO Electrical Controls. -- Overall Dimensions: Approx. 146"; x 65"; x 96"; high. -- Approx. 30,000 Lbs.

Wemhoner Variopress

FOR USE WITH CAT 307-309 MACHINES AND WORK TOOLS HAS NOT BEEN USED INCLUDES BUCKET PINS INCLUDES HYDRAULIC KIT SOLD AS IS WERK BRAU HYDRAULIC PIN GRAB COUPLER WERK BRAU PART NUMBER HD080-50-5283

BUCKET HAS BOLT ON CUTTING EDGE AND BUCKET PINS COUPLER HAS MOUNTING PINS COUPLER PICKS UP JCB3 CX14 BUCKETS PINS TO CATERPILLAR BACKHOE LOADER SOLD AS IS WERK BRAU 36" DITCH CLEANING BUCKET WITH COUPLER

171MM FACE SPREAD 50MM Pins BUCKET SOLD AS IS Fits Takeuchi TB285 WERK BRAU 12" DIG BUCKET

FITS CAT 307E-308E NO COUPLER, DIRECT PIN-ON NO OEM MOUNT SOLD AS IS WERK-BRAU CONTRACTOR GRAPPLE

FOR CAT 420-440 HOSES, CYLINDER, BRACKET INCLUDED HYDRAULIC MAIN PIN THUMB MESHES WITH 24" PIN LOCK BUCKET SOLD AS IS WERK-BRAU BACKHOE LOADER THUMB WORKS WITH 1/4 XLS SWG COUPLER

West Plains 2 head resaw, 6" wide capacity, electric drive, recently in production and ready to work

72" | 20HP

West Plains 5 Head Resaw

Grade Resaw 16” x 16”, set up very much like a West Plains, Heavy Duty W/ 44” x 5” Band Wheels, Dual Slat Feed Through Conveyor, Top Press Rolls Air, 75 HP Saw Motor, Includes 4’ x 4’ x 7’ Sawyer’s Cab W/ A/C, Complete Run Around System W/ Transfer Conveyors and Return Roll Cases, Includes Motor Control Cabinet W/ Variable Feed Drive, (22) Bands, Note: Seller has contact information for someone who will remove & load on truck, Ref # 187