Hood For Sale

2013 Tigercat 620D Cummins Dual arch Winch AC/Heat Turn around seat with joysticks New pins and bushings New glass New radiator 30.5 tires (one new and the rest at 80%) 13500 hours On the job working daily

2015 Tigercat 620E Grapple Skidder, Winch, Engine has 12,700 Hours, Enclosed Cab with Heat and Air Conditioning, New Upgraded Transmission, New Rear End, Center Section is around 60%, Needs Joystick Replaced Ready for the Woods. Weight 37,750 lbs Length 27ft Width 12 ft Height 10ft 4in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Tigercat 234B, low hours, very good condition, $70,000 - Call Tom: 272-223-1324 or 570-889-3636

35.5 tires, winch, dual arch

2014 Tigercat 620E, Woods Ready

2005 Tigercat 244 Log Loader, 2006 Big John Trailer with CTR Delimber and Topping Saw, CTR Ground Saw, Cummins 5.9 Diesel Engine Enclosed Cab Heat and AC, Ready for the Woods. Length: 15 ft 7 in Width: 10 ft 0 in Height: 11 ft 0 in Weight: 36,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2010 Bandit 4680T Track Horizontal Grinder, Equipped with a Caterpillar C-27 1050 HP Engine,3700 Hours Currently, Undercarriage is 85%, Machine has 2" and 3" Screens, 2nd Owner, Wireless Control, New HG600 Clutch, New Head and Tail Shaft, New Conveyor Belt, Compressor on machine, Ready for Work. Weight 95,200 lbs Width 140 in Height 152 in Length 492 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Saw head was taken off of a 2018 Tigercat feller buncher. We ran it through our shop and did any repairs we found. It has a new butt plate. Saw spindle was inspected. Splines and coupling are good. Seals and bearings are also good. New carbide or hardened teeth can be installed. Your choice. We have the largest used logging parts inventory in the south. Call us for all of your used parts needs.

2018 TigerCat 604E -3xxx hours -Winch like new -EHS -Chains -Center is tight

2017 TIGERCAT 620E DUAL ARCH GRAPPLE WINCH SKIDDER 6 CYL CUMMINS JOYSTICK STEER

2021 Tigercat 630H -6047 hours -Brand new rear end -Still working in woods -Can provide service records -35.5 tires 2 Brand new tires on the rear -Blows cold air -DEF deleted

This 720E Tigercat is in good condition it has 28L-26 tires with dually plates. We will be willing to sell the cutter head off it for $15,000 separate. Or if you want a smaller head for this machine we will swap out the head for a smaller one free of charge. This cutter is located at 467 St Peter St, State Line, Mississippi If interested in more details call Gavin 601-394-7796 Tim 251-366-3237 Kameron 251-242-5493

2007 Tigercat 720E, runs good but does need a saw disk. We plan to put a disk on it. So it'll be ready for the woods when purchased. Located on our yard at 437 Saint Peter Street State Line MS 39362 For more information you can call Gavin 601/394/7796 Call or text - Tim 251/366/3237 Kameron-251/242/5493 ALL SALES ON USED EQUIPMENT ARE CASH, CASHIERS CHECK OR BANK TRANSFER.

2015 Tigercat 234

2009 Tigercat 620C

TC ST5702 FELLING SAW S/N 57T0349, TELEMATICS, 340 DEG HI TQ HI ROT WRIST AND BOOM

2004 Tigercat 822 Feller Buncher, Equipped with a 22' Hot Saw Cummins 6.7 Engine, 14,000 Hours, Enclosed Cab with Heat, Undercarriage is 90%, 36" Track Pads, Ready for the Woods. Length 13 ft 11 in Width 10 ft 0 in Height 11 ft 0 in Weight 52,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2009 Tigercat 845C Feller Buncher, Tigercat 5702 22" with 360 Degree Head,14.000 Hours, Enclosed Cab with Heat and Air Conditioning, Undercarriage is 50% Ready for the Woods. Weight 57,100 lbs Length 16 ft 2 in Width 10 ft 9 in Height 11 ft 0 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Tigercat L870C Feller Buncher -3500 hours on the following: -New engine -Pumps -Finals -Uc is around 70% -New A/C compressor and belts Ready to work

2005 Tigercat 240B Log Loader, Equipped with Enclosed Cab with Heat and Air Conditioning, CTR450, New Topping Saw, Decent Tires and Brakes, Hours are 11,400. Length 15 ft 10 in Width 8 ft 6 in Height 11 ft 1 in Weight 38,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.