Hogs and Wood Grinders For Sale
Category
Hogs and Wood Grinders
216 Results Found
Call for Price
Weima WLB 1300 Horizontal Grinder 50 HP Motor System works, not currently in use, will need main bearing replaced.
Call for Price
Call for Price
WEIMA C 150 Briquette PressSpecifications & Features: -- Produces 2" (50 mm) dia. Briquettes; -- Hopper opening of 41" x 41" (1,040 x 1,040 mm); hopper volume 1.43 cu/yd (1.1 cbm). Equipped with: -- 9 HP Hydraulic motor; 0.75 HP auger motor; hydraulic oil volume of 26.4 gallons (100 liters). -- Vertical hydraulic ram compacts the material in the extrusion chamber to produce uniform material; extrusion chamber is continually filled via rotary screw type auger. -- Volume reduction from chip/dust to block up to 10:1 ratio at 2,600 PSI; hourly output up to 80 - 120 Lbs/Hr ("quoted output is an average and can be influenced by density, material size, screen size, feeding form, and other factors").Features: -- Briquette length control, chrome plated clamp, oil level switch, control panel side-mounted to hopper, and overheating protection for hydraulic oil. Solid German engineering. - Freight, start-up, discharge pipes, etc. not included.
2008 Weima WL 6/18.5 V-Rotor Drop Feed Wood Grinder Machine number 500-8876 460V 3 Phase 60 Hz Motor Output- main drive 18.5 KW 1760 rpm Motor Output- hydraulic system 1.5/2.0 KW 21 tools Rotor speed ca.90 Rotor diameter 252 mm Includes spare rotor
Call for Price
Weima Beaver 300 Horizontal Grinder with Vibrating Infeed Mellott Infeed 25 HP Main Motor 16' Infeed 460v/3Ph
Call for Price
Manufacturers Specifications tool diameter: 100 - 300 mm tool width: max. approx. 230 mm motor / grinding disc drive: approx. 1,1 kW free angle, adjustable 15 - 35° drive for coolant pump: approx. 0,065 kW tank capacity: approx. 90 l
Call for Price
West Salem Low RPM Grinder 1636 HT 40 HP 16’ Concave conveyor with magnet 18” belt 4x5 hopper hydraulic pack
MLS Number 12321010 Product Description 2015 WEST SALEM WSM5472 Horizontal Grinder -60” Millpower Shaker conveyor/finger screen – deck removed, used to meter flow of material fed by operator and reduce bed depth to make cross belt and head pulley magnets most efficient. -60” Eriez cross belt electro magnet. -Eriez 10K42 kW Silicon Rectifier incorporating: To convert 480 volt, 60 Hz, 3 phase AC to230 volt DC 10,000 watts output Normal convection cooled, full wave bridge circuit Fused AC switch Nema 3r Enclosure -Eries beefy magnet stand to support magnet and chain fall. -60” x 28’6” Slider Bed (Heavy Duty Feeder Type Conveyor) with 8’ section of stainless steel non-magnetic for Eriez cross belt magnet to perform at peak -20”x60” Dodge magnetic head pulley – installed to double up on magnets on conveyor, prior to material entering WSM grinder drag chain feed. Downstream from this is the WSM 5472bh Titan horizontal grinder. Schematics and wiring diagram can be supplied as well. WSM also supplied the chip discharge conveyor and magnetic head pulley and electrical panel with touch screen (by Emerson). Manuals available for component. Sold whereis, as is. Buyer responsible for dismantling, loading and freight.
Call for Price
Call for Price
Call for Price
West Salem model 2420GR1-H wood grinder/hog 480 v Bottom discharge No screen - machine has breaking bars Disconnected and ready to ship
Call for Price
60 HP Motor Infeed conveyor Model: WSM 1638 HTH Note: Unit does not have a control panel. This system was purchased used by the seller. He had it cleaned up and painted the system, but never built a control cabinet for it. Good project machine for the right customer. The first photos (blue) are when he bought the machine. The second photos (tan) are the current condition.
Call for Price
Call for Price
WSM (WEST SALEM) nice large horizontal grinder/hog. 300HP direct drive motor. Power assisted, spiked top feed roll and knurled & chromed bottom feed roll. Includes 30' infeed slider-belt conveyor. In very good condition. REDUCED $49,000.